Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Simple Mechanical Beneficiation Method of Coarse Fly Ash with High LOI for Making HVFA Mortar

Civil Engineering Dimension · Vol. 17 No. 1 (2015)

DOI
10.9744/ced.17.1.38-43
ISSN
1410-9530, 1979-570X
Terbit
2015-03-19
Penerbit
Petra Christian University
Bahasa
en
Lisensi
creativecommons.org/licenses/by/4.0/

Abstrak

This study focusses on the effect of milling of fly ash obtained from four different sources on the properties of high volume fly ash (HVFA) mortar. Two fly ash samples with low loss-on-ignition (LOI) were taken from a coal-fired power plant, while the other two with high LOIs were obtained from a textile factory and from a paper mill, respectively. Milling was performed using a rod mill at a certain period of time. The workability of HVFA mortar with constant water to cementitious ratio was controlled by adjusting the superplasticizer content. The results show that the specific gravity of fly ash increases after milling. Utilizing milled fly ash ends up with significant strength increase of HVFA mortar, especially those utilizing high LOI fly ash. This shows that milling is an excellent fly ash beneficiation technique, especially on the one with high LOI value.

Kata kunci

Jaringan kolaborasi para penulis

31 penulis · 89 tautan kepenulisan bersama · 4 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Petra Christian University
  • Curtin University
  • National University of Malaysia
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Florentcia HartonoPetra Christian University2
Steven TanuwijayaPetra Christian University2
Kevin Adrian WijayaPetra Christian University2
Agie VianthiPetra Christian University2
Hendra Surya WibawaPetra Christian University2
Oswyn K. WattimenaPetra Christian University2
Stacia Dwi ShenjayaPetra Christian University2
Maria LupitaPetra Christian University2
Samuel SantosaPetra Christian University2
David WiyonoPetra Christian University2
Edwin MihardjaPetra Christian University2
Elbert G. RiadyPetra Christian University2
Samuel V. SuhendroPetra Christian University2
Tri Eddy SusantoAfiliasi tidak diketahui2
Rizky T. AkbarAfiliasi tidak diketahui2
Bangkit Tegar T. AnuragaAfiliasi tidak diketahui2
Nurdin Bakri Nurdin BakriAfiliasi tidak diketahui1
Zulkefly Abdul KarimNational University of Malaysia1
Norain Mod AsriAfiliasi tidak diketahui1
Azrina Al-Hadi AbdullahAfiliasi tidak diketahui1
Zetty Zahureen Mohd YusoffAfiliasi tidak diketahui1
Steenie Edward WallahCurtin University1
Dody M.J. SumajouwCurtin University1
B. Vijaya RanganCurtin University1
Franky BudimanPetra Christian University1
Jimmy ChandraPetra Christian University1
Alvin HalimPetra Christian University1
Pamuda PudjisuryadiPetra Christian University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OpenAlex API (jurnal SINTA, ADR 0048) https://openalex.org/S2765058718, pertama di-harvest 20 Nov 2026, terakhir terlihat 20 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title xml:lang="en">Simple Mechanical Beneficiation Method of Coarse Fly Ash with High LOI for Making HVFA Mortar</dc:title><dc:creator>Antoni Antoni</dc:creator><dc:creator>Vindy Satrya</dc:creator><dc:creator>Djwantoro Hardjito</dc:creator><dc:subject>high volume fly ash</dc:subject><dc:subject>fly ash beneficiation</dc:subject><dc:subject>mechanical milling</dc:subject><dc:subject>rod mill</dc:subject><dc:subject>loss on ignition</dc:subject><dc:subject>mortar strength</dc:subject><dc:subject>workability</dc:subject><dc:subject>superplasticizer</dc:subject><dc:subject>relative density</dc:subject><dc:description xml:lang="en">This study focusses on the effect of milling of fly ash obtained from four different sources on the properties of high volume fly ash (HVFA) mortar. Two fly ash samples with low loss-on-ignition (LOI) were taken from a coal-fired power plant, while the other two with high LOIs were obtained from a textile factory and from a paper mill, respectively. Milling was performed using a rod mill at a certain period of time. The workability of HVFA mortar with constant water to cementitious ratio was controlled by adjusting the superplasticizer content. The results show that the specific gravity of fly ash increases after milling. Utilizing milled fly ash ends up with significant strength increase of HVFA mortar, especially those utilizing high LOI fly ash. This shows that milling is an excellent fly ash beneficiation technique, especially on the one with high LOI value.</dc:description><dc:publisher>Petra Christian University</dc:publisher><dc:date>2015-03-19</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.9744/ced.17.1.38-43</dc:identifier><dc:identifier>10.9744/ced.17.1.38-43</dc:identifier><dc:source>Civil Engineering Dimension; Vol 17 No 1 (2015)</dc:source><dc:source>1410-9530</dc:source><dc:source>1979-570X</dc:source><dc:language>en</dc:language><dc:relation>https://ced.petra.ac.id/index.php/civ/article/view/19206/18771</dc:relation><dc:rights>https://creativecommons.org/licenses/by/4.0/</dc:rights></oai_dc:dc>