Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Generalization of FEM Using Node-Based Shape Functions

Civil Engineering Dimension · Vol. 17 No. 3 (2015)

DOI
10.9744/ced.17.3.152-157
ISSN
1410-9530, 1979-570X
Terbit
2015-12-18
Penerbit
Petra Christian University
Bahasa
en
Lisensi
creativecommons.org/licenses/by/4.0/

Abstrak

In standard FEM, the stiffness of an element is exclusively influenced by nodes associated with the element via its element-based shape functions. In this paper, the authors present a method that can be viewed as a generalization of FEM for which the influence of a node is not limited by a hat function around the node. Shape functions over an element can be interpolated over a predefined set of nodes around the element. These node-based shape functions employ Kriging Interpolations commonly found in geostatistical technique. In this study, a set of influencing nodes are covered by surrounding layers of elements defined as its domain of influence (DOI). Thus, the element stiffness is influenced by not only the element nodes, but also satellite nodes outside the element. In a special case with zero satellite nodes, the method is specialized to the conventional FEM. This method is referred to as Node-Based Kriging FEM or K-FEM. The K-FEM has been tested on 2D elastostatic, Reissner-Mindlin’s plate and shell problems. In all cases, exceptionally accurate displacement and stress fields can be achieved with relatively coarse meshes. In addition, the same set of Kringing shape functions can be used to interpolate the mesh geometry. This property is very useful for representing the curved geometry of shells. The distinctive advantage of the K-FEM is its inheritance of the computational procedure of FEM. Any existing FE code can be easily extended to K-FEM; thus, it has a higher chance to be accepted in practice.

Kata kunci

Jaringan kolaborasi para penulis

5 penulis · 5 tautan kepenulisan bersama · 3 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Petra Christian University
  • Asian Institute of Technology
  • Ubon Ratchathani Rajabhat University
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Hidayat SyamsoeyadiAfiliasi tidak diketahui1
Sugianto SugiantoPetra Christian University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OpenAlex API (jurnal SINTA, ADR 0048) https://openalex.org/S2765058718, pertama di-harvest 20 Nov 2026, terakhir terlihat 20 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title xml:lang="en">Generalization of FEM Using Node-Based Shape Functions</dc:title><dc:creator>Worsak Kanok‐Nukulchai</dc:creator><dc:creator>Wong F.T.</dc:creator><dc:creator>Wichain Sommanawat</dc:creator><dc:subject>kriging</dc:subject><dc:subject>domain of influence</dc:subject><dc:subject>element stiffness</dc:subject><dc:subject>elastostatics</dc:subject><dc:subject>Reissner-Mindlin plates</dc:subject><dc:subject>shell analysis</dc:subject><dc:description xml:lang="en">In standard FEM, the stiffness of an element is exclusively influenced by nodes associated with the element via its element-based shape functions. In this paper, the authors present a method that can be viewed as a generalization of FEM for which the influence of a node is not limited by a hat function around the node. Shape functions over an element can be interpolated over a predefined set of nodes around the element. These node-based shape functions employ Kriging Interpolations commonly found in geostatistical technique. In this study, a set of influencing nodes are covered by surrounding layers of elements defined as its domain of influence (DOI). Thus, the element stiffness is influenced by not only the element nodes, but also satellite nodes outside the element. In a special case with zero satellite nodes, the method is specialized to the conventional FEM. This method is referred to as Node-Based Kriging FEM or K-FEM. The K-FEM has been tested on 2D elastostatic, Reissner-Mindlin’s plate and shell problems. In all cases, exceptionally accurate displacement and stress fields can be achieved with relatively coarse meshes. In addition, the same set of Kringing shape functions can be used to interpolate the mesh geometry. This property is very useful for representing the curved geometry of shells. The distinctive advantage of the K-FEM is its inheritance of the computational procedure of FEM. Any existing FE code can be easily extended to K-FEM; thus, it has a higher chance to be accepted in practice.</dc:description><dc:publisher>Petra Christian University</dc:publisher><dc:date>2015-12-18</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.9744/ced.17.3.152-157</dc:identifier><dc:identifier>10.9744/ced.17.3.152-157</dc:identifier><dc:source>Civil Engineering Dimension; Vol 17 No 3 (2015)</dc:source><dc:source>1410-9530</dc:source><dc:source>1979-570X</dc:source><dc:language>en</dc:language><dc:relation>http://ced.petra.ac.id/index.php/civ/article/view/19418/18872</dc:relation><dc:rights>https://creativecommons.org/licenses/by/4.0/</dc:rights></oai_dc:dc>