Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Utilization of low sulfur fly ash from circulating fluidized bed combustion burner as geopolymer binder

Civil Engineering Dimension · Vol. 22 No. 2 (2020) · hlm. 94–100

DOI
10.9744/ced.22.2.93-97
ISSN
1410-9530, 1979-570X
Terbit
2020-10-06
Penerbit
Petra Christian University
Bahasa
en
Lisensi
creativecommons.org/licenses/by/4.0/

Abstrak

Circulating fluidized bed combustion (CFBC) is a newer type of burner that employ a circulating process to burn fuel effectively. CFBC burning process is gaining more popularity due to its compact size, high efficiency and lower burning temperature compared to the pulverized coal combustion (PCC) burner. The CFBC burner produces fly ash with different physical properties compared to the PCC burner, i.e. the fly ash is not rounded, and required higher water content for comparable workability. The CFBC fly ash also has a high sulfur content that is detrimental for hardened concrete. Due to its drawbacks, the CFBC hardly used as cementitious material and geopolymer precursor. This study focuses on comparing variations in the concentration of NaOH solution and variations in the ratio of alkaline activators to the setting time and compressive strength of geopolymer mortars on a new class of CFBC fly ash, which have low sulfur content. The concentrations of NaOH solution were 6M, 8M, 10M, and 12M, while the alkaline activator ratios used were 3.0, 2.5, 2.0, 1.0, and 0.5. It was concluded that the low sulfur CFBC fly ash has a potential to be utilized as geopolymer precursor, however, with a shortcoming in its high water demand. The CFBC fly ash used in this study resulted in a geopolymer matrix with good compressive strength and stability. The water demand varies with the fly ash sampling time shows the challenges in the utilization of the fly ash. The highest mortar’s compressive strength, 33.4 MPa at 90 days was achieved at NaOH concentration of 8M and ratio of sodium silicate solution to sodium hydroxide solution of 2.5 with excellent stability.

Kata kunci

Jaringan kolaborasi para penulis

31 penulis · 89 tautan kepenulisan bersama · 4 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Petra Christian University
  • Curtin University
  • National University of Malaysia
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Vindy SatryaPetra Christian University2
Florentcia HartonoPetra Christian University2
Steven TanuwijayaPetra Christian University2
Kevin Adrian WijayaPetra Christian University2
Agie VianthiPetra Christian University2
Hendra Surya WibawaPetra Christian University2
Oswyn K. WattimenaPetra Christian University2
Edwin MihardjaPetra Christian University2
Elbert G. RiadyPetra Christian University2
Samuel V. SuhendroPetra Christian University2
Tri Eddy SusantoAfiliasi tidak diketahui2
Rizky T. AkbarAfiliasi tidak diketahui2
Bangkit Tegar T. AnuragaAfiliasi tidak diketahui2
Nurdin Bakri Nurdin BakriAfiliasi tidak diketahui1
Zulkefly Abdul KarimNational University of Malaysia1
Norain Mod AsriAfiliasi tidak diketahui1
Azrina Al-Hadi AbdullahAfiliasi tidak diketahui1
Zetty Zahureen Mohd YusoffAfiliasi tidak diketahui1
Steenie Edward WallahCurtin University1
Dody M.J. SumajouwCurtin University1
B. Vijaya RanganCurtin University1
Franky BudimanPetra Christian University1
Jimmy ChandraPetra Christian University1
Alvin HalimPetra Christian University1
Pamuda PudjisuryadiPetra Christian University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OpenAlex API (jurnal SINTA, ADR 0048) https://openalex.org/S2765058718, pertama di-harvest 20 Nov 2026, terakhir terlihat 20 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title xml:lang="en">Utilization of low sulfur fly ash from circulating fluidized bed combustion burner as geopolymer binder</dc:title><dc:creator>Antoni Antoni</dc:creator><dc:creator>Stacia Dwi Shenjaya</dc:creator><dc:creator>Maria Lupita</dc:creator><dc:creator>Samuel Santosa</dc:creator><dc:creator>David Wiyono</dc:creator><dc:creator>Djwantoro Hardjito</dc:creator><dc:subject>circulating fluidized bed combustion</dc:subject><dc:subject>fly ash</dc:subject><dc:subject>geopolymer</dc:subject><dc:subject>geopolymer mortar</dc:subject><dc:subject>NaOH concentration</dc:subject><dc:subject>sodium silicate</dc:subject><dc:subject>water demand</dc:subject><dc:subject>compressive strength</dc:subject><dc:subject>setting time</dc:subject><dc:subject>waste utilization</dc:subject><dc:description xml:lang="en">Circulating fluidized bed combustion (CFBC) is a newer type of burner that employ a circulating process to burn fuel effectively. CFBC burning process is gaining more popularity due to its compact size, high efficiency and lower burning temperature compared to the pulverized coal combustion (PCC) burner. The CFBC burner produces fly ash with different physical properties compared to the PCC burner, i.e. the fly ash is not rounded, and required higher water content for comparable workability. The CFBC fly ash also has a high sulfur content that is detrimental for hardened concrete. Due to its drawbacks, the CFBC hardly used as cementitious material and geopolymer precursor. This study focuses on comparing variations in the concentration of NaOH solution and variations in the ratio of alkaline activators to the setting time and compressive strength of geopolymer mortars on a new class of CFBC fly ash, which have low sulfur content. The concentrations of NaOH solution were 6M, 8M, 10M, and 12M, while the alkaline activator ratios used were 3.0, 2.5, 2.0, 1.0, and 0.5. It was concluded that the low sulfur CFBC fly ash has a potential to be utilized as geopolymer precursor, however, with a shortcoming in its high water demand. The CFBC fly ash used in this study resulted in a geopolymer matrix with good compressive strength and stability. The water demand varies with the fly ash sampling time shows the challenges in the utilization of the fly ash. The highest mortar’s compressive strength, 33.4 MPa at 90 days was achieved at NaOH concentration of 8M and ratio of sodium silicate solution to sodium hydroxide solution of 2.5 with excellent stability.</dc:description><dc:publisher>Petra Christian University</dc:publisher><dc:date>2020-10-06</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.9744/ced.22.2.93-97</dc:identifier><dc:identifier>10.9744/ced.22.2.93-97</dc:identifier><dc:source>Civil Engineering Dimension; Vol 22 No 2 (2020); 94-100</dc:source><dc:source>1410-9530</dc:source><dc:source>1979-570X</dc:source><dc:language>en</dc:language><dc:relation>https://ced.petra.ac.id/index.php/civ/article/download/22975/20225</dc:relation><dc:rights>https://creativecommons.org/licenses/by/4.0/</dc:rights></oai_dc:dc>