Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

STUDI PROSES PULPING SERAT PELEPAH DAN SERAT KULIT BUAH NIPAH (NYPA FRUTICANS) DENGAN METODE KIMIA (KAJIAN KONSENTRASI LARUTAN NaOH)

Industria Jurnal Teknologi dan Manajemen Agroindustri · Vol. 2 No. 1 (2013) · hlm. 37–46

ISSN
2252-7877, 2549-3892
Terbit
2013-01-01
Penerbit
Brawijaya University
Bahasa
id
Lisensi
creativecommons.org/licenses/by-sa/4.0/

Abstrak

Abstrak Tujuan dari penelitian adalah mendapatkan konsentrasi larutan NaOH yang terbaik, mengetahui pengaruh konsentrasi larutan NaOH terhadap kualitas kimia pulp, dan melakukan perhitungan tentang potensi bahan baku terbaik terhadap kebutuhan pulp. Bahan baku yang digunakan adalah serat pelepah dan serat kulit buah nipah yang ada di Pantai Tamban Malang Selatan. Rancangan percobaan yang digunakan berupa Rancangan Acak Kelompok dengan 2 faktor yaitu jenis baku dan lama konsentrasi larutan NaOH. Jenis bahan baku terdiri dari serat pelepah dan serat kulit buah nipah. Konsentrasi larutan NaOH terdiri dari 5%,10%,15% dan 20%. Parameter yang dianalisa meliputi kadar lignin dan selulosa. Hasil penelitian menunjukkan bahwa jenis bahan baku berpengaruh terhadap kadar selulosa sedangkan interaksi jenis bahan baku dan konsentrasi larutan NaOH berpengaruh nyata terhadap kadar lignin yang dihasilkan. Perlakuan hasil terbaik penelitian yaitu pada serat pelepah dengan konsentrasi larutan NaOH 20% dengan kadar selulosa sebesar 38,50% dan kadar lignin 7,02%. Perlakuan hasil terbaik digunakan untuk menghitung potensi dan ketersediaan bahan baku pulp yang dihasilkan dengan melihat data di Pulau Bawean. Ketersediaan pelepah kering mencapai 10.080 ton/tahun dan menghasilkan pulp sebesar 2.812 ton/tahun. Kata Kunci: Metode Kimia, Proses Pulping, Pulp, Serat Kulit Buah Nipah, Serat Pelepah Nipah. Abstract The purposes of the study are to get the best concentration of NaOH, to know the effect of concentration on the quality of chemical pulp, and perform the calculations on the potensial of the best raw materials to the needs of pulp. the raw materials that used are fiber sheath and fiber leather of palm fruit in the Tamban Malang Selatan Bech. Experimental design that used in the study is randomized block design with 2 factors: the type of raw materials and the length of concentration of NaOH. the raw materials consist of fiber sheath and fiber leather of palm fruit. The concentrations of NaOH consist of 5%, 10%, 15%, and 20%. The parameters that analyzed are including the levels of lignin and cellulose. The results of the study showed that the type of the raw materials affect the level of cellulose while the interaction of the type of raw materials and concentration of NaOH significantly affect the result of lignin level. The best result of the research is the fiber sheath with concentration of 20% NaOH with levels of cellulose in 38,5% and levels of lignin in 7,02%. The best result is used to calculate the potential and the availability of pulp raw materials that produced by looking at the data from Bawean Island. Availability midrib dry reaches 10.080 tons/years and produced pulp of 2812 tons/years. Keywords: Chemical Method, Fiber Leather Of Palm Fruit, Fiber Sheath Of Palm Fruit, Pulping, Pulping Processes.

Kata kunci

Jaringan kolaborasi para penulis

29 penulis · 59 tautan kepenulisan bersama · 5 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • University of Brawijaya
  • Universitas Islam Negeri Maulana Malik Ibrahim
  • IPB University
  • State University of Semarang
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Claudia Gadizza PerdaniUniversity of Brawijaya3
Arie Febrianto MulyadiUniversity of Brawijaya2
Nur HidayatUniversity of Brawijaya2
MustikaEndah HermayantiUniversity of Brawijaya2
Aditya NugrohoIPB University2
Fajar AdityaUniversity of Brawijaya2
Universitas BrawijayaUniversity of Brawijaya2
Faridah SitiUniversitas Islam Negeri Maulana Malik Ibrahim1
Satria Bagus PratamaUniversity of Brawijaya1
Retty Liana PutriUniversity of Brawijaya1
Rina Catur RomantikaUniversity of Brawijaya1
Fitri Nurmaysta SariUniversity of Brawijaya1
Subarkah ArifUniversity of Brawijaya1
Ika Atsari DewiUniversity of Brawijaya1
Erni Dwi Puji SetyowatiUniversity of Brawijaya1
Dodyk PranowoUniversity of Brawijaya1
Delia MuliawatiUniversity of Brawijaya1
Mas’ud EffendiUniversity of Brawijaya1
Fitri Alwi AzizahUniversity of Brawijaya1
Wignyanto WignyantoUniversity of Brawijaya1
Hoirun NisakUniversity of Brawijaya1
Dimas BintaUniversity of Brawijaya1
Arie Febrianto MulyartoAfiliasi tidak diketahui1
Robiatul AdawıyahUniversity of Brawijaya1
Arif Nur HidayatState University of Semarang1
Yanuanda ArifiandiniUniversity of Brawijaya1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OpenAlex API (jurnal SINTA, ADR 0048) https://openalex.org/S4210180819, pertama di-harvest 21 Nov 2026, terakhir terlihat 21 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title xml:lang="id">STUDI PROSES PULPING SERAT PELEPAH DAN SERAT KULIT BUAH NIPAH (NYPA FRUTICANS) DENGAN METODE KIMIA (KAJIAN KONSENTRASI LARUTAN NaOH)</dc:title><dc:creator>Susinggih Wijana</dc:creator><dc:creator>Nur Lailatul Rahmah</dc:creator><dc:creator>Dedik Ansory</dc:creator><dc:subject>chemical pulping</dc:subject><dc:subject>NaOH concentration</dc:subject><dc:subject>pulp quality</dc:subject><dc:subject>lignin content</dc:subject><dc:subject>cellulose content</dc:subject><dc:subject>raw material availability</dc:subject><dc:subject>Bawean Island</dc:subject><dc:description xml:lang="id">Abstrak Tujuan dari penelitian adalah mendapatkan konsentrasi larutan NaOH yang terbaik, mengetahui pengaruh konsentrasi larutan NaOH terhadap kualitas kimia pulp, dan melakukan perhitungan tentang potensi bahan baku terbaik terhadap kebutuhan pulp. Bahan baku yang digunakan adalah serat pelepah dan serat kulit buah nipah yang ada di Pantai Tamban Malang Selatan. Rancangan percobaan yang digunakan berupa Rancangan Acak Kelompok dengan 2 faktor yaitu jenis baku dan lama konsentrasi larutan NaOH. Jenis bahan baku terdiri dari serat pelepah dan serat kulit buah nipah. Konsentrasi larutan NaOH terdiri dari 5%,10%,15% dan 20%. Parameter yang dianalisa meliputi kadar lignin dan selulosa. Hasil penelitian menunjukkan bahwa jenis bahan baku berpengaruh terhadap kadar selulosa sedangkan interaksi jenis bahan baku dan konsentrasi larutan NaOH berpengaruh nyata terhadap kadar lignin yang dihasilkan. Perlakuan hasil terbaik penelitian yaitu pada serat pelepah dengan konsentrasi larutan NaOH 20% dengan kadar selulosa sebesar 38,50% dan kadar lignin 7,02%. Perlakuan hasil terbaik digunakan untuk menghitung potensi dan ketersediaan bahan baku pulp yang dihasilkan dengan melihat data di Pulau Bawean. Ketersediaan pelepah kering mencapai 10.080 ton/tahun dan menghasilkan pulp sebesar 2.812 ton/tahun. Kata Kunci : Metode Kimia, Proses Pulping, Pulp, Serat Kulit Buah Nipah, Serat Pelepah Nipah. Abstract The purposes of the study are to get the best concentration of NaOH, to know the effect of concentration on the quality of chemical pulp, and perform the calculations on the potensial of the best raw materials to the needs of pulp. the raw materials that used are fiber sheath and fiber leather of palm fruit in the Tamban Malang Selatan Bech. Experimental design that used in the study is randomized block design with 2 factors: the type of raw materials and the length of concentration of NaOH. the raw materials consist of fiber sheath and fiber leather of palm fruit. The concentrations of NaOH consist of 5%, 10%, 15%, and 20%. The parameters that analyzed are including the levels of lignin and cellulose. The results of the study showed that the type of the raw materials affect the level of cellulose while the interaction of the type of raw materials and concentration of NaOH significantly affect the result of lignin level. The best result of the research is the fiber sheath with concentration of 20% NaOH with levels of cellulose in 38,5% and levels of lignin in 7,02%. The best result is used to calculate the potential and the availability of pulp raw materials that produced by looking at the data from Bawean Island. Availability midrib dry reaches 10.080 tons/years and produced pulp of 2812 tons/years. Keywords : Chemical Method, Fiber Leather Of Palm Fruit, Fiber Sheath Of Palm Fruit, Pulping, Pulping Processes.</dc:description><dc:publisher>Brawijaya University</dc:publisher><dc:date>2013-01-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:identifier>https://industria.ub.ac.id/index.php/industri/article/download/130/317</dc:identifier><dc:source>Industria Jurnal Teknologi dan Manajemen Agroindustri; Vol 2 No 1 (2013); 37-46</dc:source><dc:source>2252-7877</dc:source><dc:source>2549-3892</dc:source><dc:language>id</dc:language><dc:rights>https://creativecommons.org/licenses/by-sa/4.0/</dc:rights></oai_dc:dc>