Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Design of Flexible 3.2 GHz Rectangular Microstrip Patch Antenna for S-Band Communication

Jurnal Elektronika dan Telekomunikasi · Vol. 21 No. 2 (2021) · hlm. 140–145

DOI
10.14203/jet.v21.140-145
ISSN
1411-8289, 2527-9955
Terbit
2021-12-31
Penerbit
Indonesian Institute of Sciences
Bahasa
en
Lisensi
creativecommons.org/licenses/by-nc-sa/4.0/

Abstrak

This paper presents the design, simulation, realization and analysis of flexible microstrip patch antenna for S-band applications. The proposed design also adopts the conformal structure by utilizing flexible substrate. Conformal or flexible structure allows the antenna to fit with any specified shape as desired. The antenna patch dimensions is 43 mm × 25 mm without SMA connector. The patch is etched on the flexible dielectric substrate, pyralux FR 9111, with a relative dielectric constant of εr = 3 and the thickness of substrate, h = 0.025 mm. The antenna is designed to resonate at 3.2 GHz. The return loss (RL) of the simulation is -35.80 dB at the center frequency of 3.2 GHz. The fabricated antenna prototype was measured at different bending angles scenarios including 0º, 30º, 60º, and 90º. The measurement of antenna prototype shows that the center frequency is shifted to the higher frequency of 3.29 GHz, compared to the simulation result. Among these scenarios, measurement at bending angle of 90º gives the best performance with RL = - 31.38 dB at 3.29 GHz, the bandwidth is 80 MHz, and the impedance ZA = 48.36 + j2.04 Ω. Despite a slight differences from simulation results, the designed antenna still performs well as expected.

Kata kunci

Jaringan kolaborasi para penulis

40 penulis · 184 tautan kepenulisan bersama · 107 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • National Research and Innovation Agency
  • Indonesian Institute of Sciences
  • Riau University
  • Bandung Institute of Technology
  • Telkom University
  • University of Technology Malaysia
  • Universitas Nurtanio
  • Organisasi lain
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Yuyu WahyuIndonesian Institute of Sciences7
Nasrullah ArmiIndonesian Institute of Sciences5
Dayat KurniawanNational Research and Innovation Agency5
Ratna IndrawijayaNational Research and Innovation Agency5
Winy DesvasariIndonesian Institute of Sciences4
Achmad MunirBandung Institute of Technology3
Budiman P.A. RohmanNational Research and Innovation Agency3
Heroe WijantoTelkom University3
Yussi Perdana SaputeraIndonesian Institute of Sciences3
Topik Teguh EstuIndonesian Institute of Sciences3
Tajul MiftahushudurIndonesian Institute of Sciences3
Arumjeni MitayaniNational Research and Innovation Agency3
Razali NgahUniversity of Technology Malaysia2
Arief Suryadi SatyawanUniversitas Nurtanio2
Suyoto SuyotoNational Research and Innovation Agency2
Luthfi AfifRiau University2
Ping Jack SohUniversiti Malaysia Perlis2
Yusuf Nur WijayantoIndonesian Institute of Sciences2
Fajri DarwisNational Research and Innovation Agency2
Galih Nugraha NurkahfiNational Research and Innovation Agency2
Purwoko AdhiNational Research and Innovation Agency2
Iman FirmansyahNational Research and Innovation Agency2
Asep Yudi HercuadiIndonesian Institute of Sciences2
Arie SetiawanIndonesian Institute of Sciences2
Enceng SulaemanPoliteknik Negeri Bandung2
Mochamad YunusPakuan University1
Hardi NusantaraBandung Institute of Technology1
Mohammad Ridwan EffendiBandung Institute of Technology1
Indah Permata SariRiau University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OpenAlex API (jurnal SINTA, ADR 0048) https://openalex.org/S4210212760, pertama di-harvest 21 Nov 2026, terakhir terlihat 21 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title xml:lang="en">Design of Flexible 3.2 GHz Rectangular Microstrip Patch Antenna for S-Band Communication</dc:title><dc:creator>Teguh Praludi</dc:creator><dc:creator>Yana Taryana</dc:creator><dc:creator>Ken Paramayudha</dc:creator><dc:creator>Budi Prawara</dc:creator><dc:creator>Yusnita Rahayu</dc:creator><dc:creator>Chaeriah Bin Ali Wael</dc:creator><dc:creator>Yaya Sulaeman</dc:creator><dc:creator>Bagus Edy Sukoco</dc:creator><dc:creator>Ros Sariningrum</dc:creator><dc:creator>Hendrawan Kurniadin</dc:creator><dc:creator>Wahid Nova Nugraha</dc:creator><dc:subject>rectangular patch antenna</dc:subject><dc:subject>S-band</dc:subject><dc:subject>3.2 GHz</dc:subject><dc:subject>conformal antenna</dc:subject><dc:subject>flexible substrates</dc:subject><dc:subject>bending angle</dc:subject><dc:subject>return loss</dc:subject><dc:subject>impedance matching</dc:subject><dc:subject>bandwidth</dc:subject><dc:subject>antenna prototype</dc:subject><dc:description xml:lang="en">This paper presents the design, simulation, realization and analysis of flexible microstrip patch antenna for S-band applications. The proposed design also adopts the conformal structure by utilizing flexible substrate. Conformal or flexible structure allows the antenna to fit with any specified shape as desired. The antenna patch dimensions is 43 mm × 25 mm without SMA connector. The patch is etched on the flexible dielectric substrate, pyralux FR 9111, with a relative dielectric constant of εr = 3 and the thickness of substrate, h = 0.025 mm. The antenna is designed to resonate at 3.2 GHz. The return loss (RL) of the simulation is -35.80 dB at the center frequency of 3.2 GHz. The fabricated antenna prototype was measured at different bending angles scenarios including 0º, 30º, 60º, and 90º. The measurement of antenna prototype shows that the center frequency is shifted to the higher frequency of 3.29 GHz, compared to the simulation result. Among these scenarios, measurement at bending angle of 90º gives the best performance with RL = - 31.38 dB at 3.29 GHz, the bandwidth is 80 MHz, and the impedance ZA = 48.36 + j2.04 Ω. Despite a slight differences from simulation results, the designed antenna still performs well as expected.</dc:description><dc:publisher>Indonesian Institute of Sciences</dc:publisher><dc:date>2021-12-31</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:identifier>https://doi.org/10.14203/jet.v21.140-145</dc:identifier><dc:identifier>10.14203/jet.v21.140-145</dc:identifier><dc:source>Jurnal Elektronika dan Telekomunikasi; Vol 21 No 2 (2021); 140-145</dc:source><dc:source>1411-8289</dc:source><dc:source>2527-9955</dc:source><dc:language>en</dc:language><dc:rights>https://creativecommons.org/licenses/by-nc-sa/4.0/</dc:rights></oai_dc:dc>