Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Structural, Magnetic, and X-Band Microwave Absorbing Properties of Ni-Ferrites Prepared Using Oxidized Mill Scales

Jurnal Elektronika dan Telekomunikasi · Vol. 21 No. 1 (2021) · hlm. 27–34

DOI
10.14203/jet.v21.27-34
ISSN
1411-8289, 2527-9955
Terbit
2021-08-31
Penerbit
Indonesian Institute of Sciences
Bahasa
en
Lisensi
creativecommons.org/licenses/by-nc-sa/4.0/

Abstrak

This study aims to evaluate the structural, magnetic, and microwave absorbing properties at the X-band region of oxidized mill scales as by-product derived from a steel making process by means of a facile solid-state reaction. The oxidized mill scales were heated at 600 °C for 4 h followed by mixing with NiO. A calcination process took place at 900 °C and sintering process were conducted at 1260 °C with a milling process conducted in between the heating process. X-ray diffraction (XRD) and scanning electron microscope (SEM) equipped with energy dispersive spectrometer (EDS) were employed to evaluate the structural properties of the Ni-ferrites samples. Remacomp measurement were conducted to evaluate the magnetic properties and vector network analyzer (VNA) to measure its microwave properties. A single phase of NiFe2O4 was confirmed by XRD data. The site occupancies derived from the Rietveld refinement shows that the Ni:Fe:O ratio deviates from the 1:2:4 ratio as that suggests vacancies formed in the Ni2+ and Fe3+ that lowers the unit cell density to 5.08 g/cm3 that further confirmed by EDS measurement. The coercivity of 11 kOe is also higher than the bulk NiFe2O4¬ prepared by the chemical grade raw materials. The reflection data of the microwave properties at X-band of 8-12 GHz do not shows significant absorptions. This study suggests that the selected preparation method yields a single phase, however with the significant crystallographic defects and has less ‘soft’ magnetic properties compared to NiFe2O4 prepared using chemical grade by previous study.

Kata kunci

Jaringan kolaborasi para penulis

19 penulis · 71 tautan kepenulisan bersama · 20 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Indonesian Institute of Sciences
  • Binus University
  • Padjadjaran University
  • National Research and Innovation Agency
  • University of Malaya
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Dedi DediIndonesian Institute of Sciences9
Budi AdiperdanaPadjadjaran University6
Asep Ridwan NugrahaIndonesian Institute of Sciences5
Nanang SudrajatIndonesian Institute of Sciences4
Wan Zailan Kamaruddin Wan AliUniversity of Malaya1
Irwan Ary DharmawanPadjadjaran University1
Agustina Sus AndreaniNational Research and Innovation Agency1
Robeth Viktoria ManurungNational Research and Innovation Agency1
Jonathan Edwards TelaumbanuaBinus University1
Richard Anthony LimBinus University1
Winda AstutiBinus University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OpenAlex API (jurnal SINTA, ADR 0048) https://openalex.org/S4210212760, pertama di-harvest 21 Nov 2026, terakhir terlihat 21 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title xml:lang="en">Structural, Magnetic, and X-Band Microwave Absorbing Properties of Ni-Ferrites Prepared Using Oxidized Mill Scales</dc:title><dc:creator>Ardita Septiani</dc:creator><dc:creator>Novrita Idayanti</dc:creator><dc:creator>Tony Kristiantoro</dc:creator><dc:creator>Dedi Mada</dc:creator><dc:creator>Nadya Larasati Kartika</dc:creator><dc:creator>Dadang Mulyadi</dc:creator><dc:creator>Asep Rusmana</dc:creator><dc:creator>Pepen Sumpena</dc:creator><dc:subject>NiFe2O4</dc:subject><dc:subject>nickel ferrite</dc:subject><dc:subject>steelmaking by-products</dc:subject><dc:subject>microwave absorbing materials</dc:subject><dc:subject>X-band</dc:subject><dc:subject>magnetic properties</dc:subject><dc:subject>coercivity</dc:subject><dc:subject>crystal defects</dc:subject><dc:subject>site occupancy</dc:subject><dc:subject>vacancies</dc:subject><dc:subject>solid-state synthesis</dc:subject><dc:subject>sintering</dc:subject><dc:description xml:lang="en">This study aims to evaluate the structural, magnetic, and microwave absorbing properties at the X-band region of oxidized mill scales as by-product derived from a steel making process by means of a facile solid-state reaction. The oxidized mill scales were heated at 600 °C for 4 h followed by mixing with NiO. A calcination process took place at 900 °C and sintering process were conducted at 1260 °C with a milling process conducted in between the heating process. X-ray diffraction (XRD) and scanning electron microscope (SEM) equipped with energy dispersive spectrometer (EDS) were employed to evaluate the structural properties of the Ni-ferrites samples. Remacomp measurement were conducted to evaluate the magnetic properties and vector network analyzer (VNA) to measure its microwave properties. A single phase of NiFe2O4 was confirmed by XRD data. The site occupancies derived from the Rietveld refinement shows that the Ni:Fe:O ratio deviates from the 1:2:4 ratio as that suggests vacancies formed in the Ni2+ and Fe3+ that lowers the unit cell density to 5.08 g/cm3 that further confirmed by EDS measurement. The coercivity of 11 kOe is also higher than the bulk NiFe2O4¬ prepared by the chemical grade raw materials. The reflection data of the microwave properties at X-band of 8-12 GHz do not shows significant absorptions. This study suggests that the selected preparation method yields a single phase, however with the significant crystallographic defects and has less ‘soft’ magnetic properties compared to NiFe2O4 prepared using chemical grade by previous study.</dc:description><dc:publisher>Indonesian Institute of Sciences</dc:publisher><dc:date>2021-08-31</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.14203/jet.v21.27-34</dc:identifier><dc:identifier>10.14203/jet.v21.27-34</dc:identifier><dc:source>Jurnal Elektronika dan Telekomunikasi; Vol 21 No 1 (2021); 27-34</dc:source><dc:source>1411-8289</dc:source><dc:source>2527-9955</dc:source><dc:language>en</dc:language><dc:relation>https://www.jurnalet.com/jet/article/download/387/351</dc:relation><dc:rights>https://creativecommons.org/licenses/by-nc-sa/4.0/</dc:rights></oai_dc:dc>