Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Analysis of Thermal Treatment Zirconia as Spacer Layer on Dye-Sensitized Solar Cell (DSSC) Performance with Monolithic Structure

Jurnal Elektronika dan Telekomunikasi · Vol. 18 No. 1 (2018) · hlm. 21–26

DOI
10.14203/jet.v18.21-26
ISSN
1411-8289, 2527-9955
Terbit
2018-08-31
Penerbit
Indonesian Institute of Sciences
Bahasa
en
Lisensi
creativecommons.org/licenses/by-nc-sa/4.0/

Abstrak

Monolithic dye-sensitized solar cells (DSSC) offer the prospect of lower material cost and require a simpler manufacturing process compared with conventional DSSC. Fabricated on a single fluorine tin oxide (FTO) glass substrate consists of a nanoporous TiO2 photoanode layer, a ZrO2 spacer layer, a carbon counter electrode layer, a dye, and an electrolyte. The spacer layer on the monolithic DSSC serves as electrolyte storage and insulating layer to separate between photoanode and counter electrode. Zirconia is often used as a spacer because it has high temperature resistant properties, high dielectric constant and adhesive as an insulator that has band gap between 5-6 eV. The effects of the thermal treatment of zirconia layer as a spacer electrolyte on the performance of monolithic DSSC have been investigated. The cell’s performance increases with the sintering temperature as well as indicated by the decreased in particle size and increased in quantum efficiency in the absorption region of the titania layer. Co-sintering treatment tends to drastically reduce cell’s performance. The highest performance was obtained at a temperature sintering of 500o C with an PCE of 0.22%, Isc = 0.16 mA and Voc = 0.71 V.

Kata kunci

Jaringan kolaborasi para penulis

36 penulis · 102 tautan kepenulisan bersama · 59 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Indonesian Institute of Sciences
  • Universitas Gadjah Mada
  • Hasanuddin University
  • Telkom University
  • Indonesia University of Education
  • Bandung Institute of Technology
  • Surya University
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Natalita Maulani NursamIndonesian Institute of Sciences8
Putri Nur AnggrainiIndonesian Institute of Sciences5
Lia MulianiIndonesian Institute of Sciences3
Zahra Noori Al MubarakHasanuddin University3
Bayu Aditya NugrahaHasanuddin University3
Jumina JuminaUniversitas Gadjah Mada2
Natalia M. NursamIndonesian Institute of Sciences2
Ade IstiqomahTelkom University2
Deborah AugustineSurya University2
Niki PrastomoSurya University2
Rico Fernado SinagaTelkom University2
Rizky AbdillahTelkom University2
Muh KurniawanAfiliasi tidak diketahui1
Adiwar AdiwarAfiliasi tidak diketahui1
Kamarza MuliaUniversity of Indonesia1
Maulidan FirdausSebelas Maret University1
Iqmal TahirUniversitas Gadjah Mada1
Mustofa MustofaUniversitas Gadjah Mada1
Ruslin HadanuUniversitas Pattimura1
Waslaluddin WaslaluddinIndonesia University of Education1
Wida LidiawatiIndonesia University of Education1
Lia Muliani PratomoIndonesian Institute of Sciences1
Imam SantosoBandung Institute of Technology1
Eri WidiantoUniversity of Singaperbangsa Karawang1
Syoni SoepriyantoBandung Institute of Technology1
Evira Bella YustianiBandung Institute of Technology1
Lilis RetnaningsihIndonesian Institute of Sciences1
Mariya Al QibtiyaIndonesia University of Education1
Yusuf Nur WijayantoIndonesian Institute of Sciences1
Pamungkas DaudIndonesian Institute of Sciences1
Dadin MahmudinIndonesian Institute of Sciences1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OpenAlex API (jurnal SINTA, ADR 0048) https://openalex.org/S4210212760, pertama di-harvest 21 Nov 2026, terakhir terlihat 21 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title xml:lang="en">Analysis of Thermal Treatment Zirconia as Spacer Layer on Dye-Sensitized Solar Cell (DSSC) Performance with Monolithic Structure</dc:title><dc:creator>Chairil Anwar</dc:creator><dc:creator>Erlyta Septa Rosa</dc:creator><dc:creator>Shobih Shobih</dc:creator><dc:creator>Jojo Hidayat</dc:creator><dc:creator>Dahlang Tahir</dc:creator><dc:subject>dye-sensitized solar cells</dc:subject><dc:subject>heat treatment</dc:subject><dc:subject>sintering temperature</dc:subject><dc:subject>fluorine-doped tin oxide substrate</dc:subject><dc:subject>TiO2 photoanode</dc:subject><dc:subject>co-sintering</dc:subject><dc:subject>power conversion efficiency</dc:subject><dc:subject>quantum efficiency</dc:subject><dc:description xml:lang="en">Monolithic dye-sensitized solar cells (DSSC) offer the prospect of lower material cost and require a simpler manufacturing process compared with conventional DSSC. Fabricated on a single fluorine tin oxide (FTO) glass substrate consists of a nanoporous TiO2 photoanode layer, a ZrO2 spacer layer, a carbon counter electrode layer, a dye, and an electrolyte. The spacer layer on the monolithic DSSC serves as electrolyte storage and insulating layer to separate between photoanode and counter electrode. Zirconia is often used as a spacer because it has high temperature resistant properties, high dielectric constant and adhesive as an insulator that has band gap between 5-6 eV. The effects of the thermal treatment of zirconia layer as a spacer electrolyte on the performance of monolithic DSSC have been investigated. The cell’s performance increases with the sintering temperature as well as indicated by the decreased in particle size and increased in quantum efficiency in the absorption region of the titania layer. Co-sintering treatment tends to drastically reduce cell’s performance. The highest performance was obtained at a temperature sintering of 500o C with an PCE of 0.22%, Isc = 0.16 mA and Voc = 0.71 V.</dc:description><dc:publisher>Indonesian Institute of Sciences</dc:publisher><dc:date>2018-08-31</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.14203/jet.v18.21-26</dc:identifier><dc:identifier>10.14203/jet.v18.21-26</dc:identifier><dc:source>Jurnal Elektronika dan Telekomunikasi; Vol 18 No 1 (2018); 21-26</dc:source><dc:source>1411-8289</dc:source><dc:source>2527-9955</dc:source><dc:language>en</dc:language><dc:relation>https://www.jurnalet.com/jet/article/download/232/214</dc:relation><dc:rights>https://creativecommons.org/licenses/by-nc-sa/4.0/</dc:rights></oai_dc:dc>