Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Effect of Geometrical Structure to the Performance of Monolithic Dye–Sensitized Solar Cells

Jurnal Elektronika dan Telekomunikasi · Vol. 18 No. 2 (2018) · hlm. 53–59

DOI
10.14203/jet.v18.53-59
ISSN
1411-8289, 2527-9955
Terbit
2018-12-28
Penerbit
Indonesian Institute of Sciences
Bahasa
en
Lisensi
creativecommons.org/licenses/by-nc-sa/4.0/

Abstrak

Since invented for the first time, researchers in the world were focusing on how to increase the efficiency of dye-sensitized solar cells (DSSC) and reduce of the fabrication cost. Monolithic type of DSSC is one of the best solutions to reduce the fabrication cost due to the elimination of one of transparent conductive oxide (TCO) substrate. In this study, DSSC monolithic was fabricated layer by layer by using screen printing method. There are three layers that printed in each cell namely TiO2, ZrO2, and carbon before being injected with electrolytes. The geometrical structure of DSSC was varied to find the highest performance. From the I-V characteristics and incident photon-to-current efficiency (IPCE) characterization shows the highest efficiency is 0.137% and the highest conversion of photons to current occurs at around 510 nm wavelength, for a structure which has ZrO­2 layer not crosses over the no-FTO area, while TiO2 layer half crosses the no-FTO area, this is most likely caused by the imperfection of the ZrO2layer.

Kata kunci

Jaringan kolaborasi para penulis

28 penulis · 84 tautan kepenulisan bersama · 52 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Indonesian Institute of Sciences
  • Hasanuddin University
  • Telkom University
  • Indonesia University of Education
  • Bandung Institute of Technology
  • Surya University
  • University of Singaperbangsa Karawang
  • Organisasi lain
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Natalita Maulani NursamIndonesian Institute of Sciences7
Erlyta Septa RosaIndonesian Institute of Sciences6
Putri Nur AnggrainiIndonesian Institute of Sciences4
Lia MulianiIndonesian Institute of Sciences3
Zahra Noori Al MubarakHasanuddin University3
Chairil AnwarUniversitas Gadjah Mada3
Natalia M. NursamIndonesian Institute of Sciences2
Ade IstiqomahTelkom University2
Deborah AugustineSurya University1
Niki PrastomoSurya University1
Waslaluddin WaslaluddinIndonesia University of Education1
Wida LidiawatiIndonesia University of Education1
Lia Muliani PratomoIndonesian Institute of Sciences1
Rico Fernado SinagaTelkom University1
Imam SantosoBandung Institute of Technology1
Eri WidiantoUniversity of Singaperbangsa Karawang1
Syoni SoepriyantoBandung Institute of Technology1
Evira Bella YustianiBandung Institute of Technology1
Lilis RetnaningsihIndonesian Institute of Sciences1
Mariya Al QibtiyaIndonesia University of Education1
Rizky AbdillahTelkom University1
Yusuf Nur WijayantoIndonesian Institute of Sciences1
Pamungkas DaudIndonesian Institute of Sciences1
Dadin MahmudinIndonesian Institute of Sciences1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OpenAlex API (jurnal SINTA, ADR 0048) https://openalex.org/S4210212760, pertama di-harvest 21 Nov 2026, terakhir terlihat 21 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title xml:lang="en">Effect of Geometrical Structure to the Performance of Monolithic Dye–Sensitized Solar Cells</dc:title><dc:creator>Bayu Aditya Nugraha</dc:creator><dc:creator>Shobih Shobih</dc:creator><dc:creator>Jojo Hidayat</dc:creator><dc:creator>Dahlang Tahir</dc:creator><dc:subject>geometric structure</dc:subject><dc:subject>screen printing</dc:subject><dc:subject>TiO2 layer</dc:subject><dc:subject>carbon counter electrode</dc:subject><dc:subject>external quantum efficiency</dc:subject><dc:subject>current-voltage characteristics</dc:subject><dc:subject>fabrication cost reduction</dc:subject><dc:description xml:lang="en">Since invented for the first time, researchers in the world were focusing on how to increase the efficiency of dye-sensitized solar cells (DSSC) and reduce of the fabrication cost. Monolithic type of DSSC is one of the best solutions to reduce the fabrication cost due to the elimination of one of transparent conductive oxide (TCO) substrate. In this study, DSSC monolithic was fabricated layer by layer by using screen printing method. There are three layers that printed in each cell namely TiO2, ZrO2, and carbon before being injected with electrolytes. The geometrical structure of DSSC was varied to find the highest performance. From the I-V characteristics and incident photon-to-current efficiency (IPCE) characterization shows the highest efficiency is 0.137% and the highest conversion of photons to current occurs at around 510 nm wavelength, for a structure which has ZrO­2 layer not crosses over the no-FTO area, while TiO2 layer half crosses the no-FTO area, this is most likely caused by the imperfection of the ZrO2layer.</dc:description><dc:publisher>Indonesian Institute of Sciences</dc:publisher><dc:date>2018-12-28</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.14203/jet.v18.53-59</dc:identifier><dc:identifier>10.14203/jet.v18.53-59</dc:identifier><dc:source>Jurnal Elektronika dan Telekomunikasi; Vol 18 No 2 (2018); 53-59</dc:source><dc:source>1411-8289</dc:source><dc:source>2527-9955</dc:source><dc:language>en</dc:language><dc:relation>https://www.jurnalet.com/jet/article/download/231/226</dc:relation><dc:rights>https://creativecommons.org/licenses/by-nc-sa/4.0/</dc:rights></oai_dc:dc>