Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Franklin Collinear Antenna 2 Levels Different Sides using Array Method 4 Stacking Units 360ᵒ with Integrated Reflector and Power Combiner for ADS-B S-Receiver Mode

Jurnal Elektronika dan Telekomunikasi · Vol. 21 No. 2 (2021) · hlm. 146–153

DOI
10.14203/jet.v21.146-153
ISSN
1411-8289, 2527-9955
Terbit
2021-12-31
Penerbit
Indonesian Institute of Sciences
Bahasa
en
Lisensi
creativecommons.org/licenses/by-nc-sa/4.0/

Abstrak

In this study, an antenna system that could cover the 360ᵒ detection area using the microstrip method was created. The antenna design proposed uses the franklin collinear method with the addition of an array of arms to the left and right of the antenna and the addition of reflectors as a gain enhancer. The four antenna array units are combined using a power divider (combiner) as a unifying antenna. Antenna design with end fire radiation pattern cannot be used in receiving the ADS-B antenna system, because it works only in certain sectors with certain beamwidth, so it needs to be modified by adding an array of 4 units that make up 360◦ radiation of directional diagrams. The addition of the reflector is done by testing the optimum width. The most optimum width is obtained by the width of the side addition on the side of the antenna aperture cross section width of 80 mm. Based on the results of experiments that have been carried out for the design of receiver antennas for ADS-B applications that are required in the form of a radiation pattern in all directions using the reflector technique, the most appropriate gain increase is to use a phase difference for the antennas that are closest both left and right by 90o in ¼ λ conditions in the integration process using a 4 way power combiner. Response return loss at frequency 1.0752 GHz and 1.109 GHz is -15 dB, it means antenna has 33.8 MHz bandwidth with maximum response return loss at -23.22 dB and gain of 7.586 dBi, this antenna design is very suitable for use in the ADS-B application. Design and simulation at this antenna used CST software.

Kata kunci

Jaringan kolaborasi para penulis

36 penulis · 163 tautan kepenulisan bersama · 92 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • National Research and Innovation Agency
  • Indonesian Institute of Sciences
  • Riau University
  • Universitas Jenderal Achmad Yani
  • Telkom University
  • Universitas Islam Nusantara
  • Indonesian National Institute of Aeronautics and Space
  • Organisasi lain
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Yusnita RahayuRiau University4
Chaeriah Bin Ali WaelIndonesian Institute of Sciences3
Yaya SulaemanIndonesian Institute of Sciences3
Leni UtamiRiau University3
Anhar AnharRiau University3
Yana TaryanaNational Research and Innovation Agency2
Yuyu WahyuIndonesian Institute of Sciences2
Agus Hendra WahyudiIndonesian National Institute of Aeronautics and Space1
Imas Tri SetyadewiNational Research and Innovation Agency1
Yanuar PrabowoNational Research and Innovation Agency1
Mohammad Amanta Kumala SaktiNational Research and Innovation Agency1
Josaphat Tetuko Sri SumantyoChiba University1
Yomi GunoNational Research and Innovation Agency1
Donatina Miswati HadiyantiNational Research and Innovation Agency1
Novelita RahayuNational Research and Innovation Agency1
Nurul Lailatul MuzayadahNational Research and Innovation Agency1
Cahya Edi SantosaNational Research and Innovation Agency1
Wahyudi WahyudiNational Research and Innovation Agency1
Muhammad Reza HidayatUniversitas Jenderal Achmad Yani1
Rima Anisa MaulidiniUniversitas Jenderal Achmad Yani1
Ken ParamayudhaNational Research and Innovation Agency1
Budi PrawaraNational Research and Innovation Agency1
Bagus Edy SukocoNational Research and Innovation Agency1
Ros SariningrumIndonesian Institute of Sciences1
Hendrawan KurniadinNational Research and Innovation Agency1
Wahid Nova NugrahaRiau University1
Tajul MiftahushudurIndonesian Institute of Sciences1
Folin OktafianiIndonesian Institute of Sciences1
Octa HerianaIndonesian Institute of Sciences1
Folin OktavianiIndonesian Institute of Sciences1
Bambang Setia NugrohoTelkom University1
W. I. PrayogoTelkom University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OpenAlex API (jurnal SINTA, ADR 0048) https://openalex.org/S4210212760, pertama di-harvest 21 Nov 2026, terakhir terlihat 21 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title xml:lang="en">Franklin Collinear Antenna 2 Levels Different Sides using Array Method 4 Stacking Units 360ᵒ with Integrated Reflector and Power Combiner for ADS-B S-Receiver Mode</dc:title><dc:creator>Yussi Perdana Saputera</dc:creator><dc:creator>Topik Teguh Estu</dc:creator><dc:creator>Teguh Praludi</dc:creator><dc:creator>Ganis Sanhaji</dc:creator><dc:subject>antenna arrays</dc:subject><dc:subject>reflector</dc:subject><dc:subject>power combiner</dc:subject><dc:subject>ADS-B receiver</dc:subject><dc:subject>microstrip antenna</dc:subject><dc:subject>antenna gain enhancement</dc:subject><dc:subject>return loss</dc:subject><dc:subject>bandwidth</dc:subject><dc:description xml:lang="en">In this study, an antenna system that could cover the 360ᵒ detection area using the microstrip method was created. The antenna design proposed uses the franklin collinear method with the addition of an array of arms to the left and right of the antenna and the addition of reflectors as a gain enhancer. The four antenna array units are combined using a power divider (combiner) as a unifying antenna. Antenna design with end fire radiation pattern cannot be used in receiving the ADS-B antenna system, because it works only in certain sectors with certain beamwidth, so it needs to be modified by adding an array of 4 units that make up 360◦ radiation of directional diagrams. The addition of the reflector is done by testing the optimum width. The most optimum width is obtained by the width of the side addition on the side of the antenna aperture cross section width of 80 mm. Based on the results of experiments that have been carried out for the design of receiver antennas for ADS-B applications that are required in the form of a radiation pattern in all directions using the reflector technique, the most appropriate gain increase is to use a phase difference for the antennas that are closest both left and right by 90o in ¼ λ conditions in the integration process using a 4 way power combiner. Response return loss at frequency 1.0752 GHz and 1.109 GHz is -15 dB, it means antenna has 33.8 MHz bandwidth with maximum response return loss at -23.22 dB and gain of 7.586 dBi, this antenna design is very suitable for use in the ADS-B application. Design and simulation at this antenna used CST software.</dc:description><dc:publisher>Indonesian Institute of Sciences</dc:publisher><dc:date>2021-12-31</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.14203/jet.v21.146-153</dc:identifier><dc:identifier>10.14203/jet.v21.146-153</dc:identifier><dc:source>Jurnal Elektronika dan Telekomunikasi; Vol 21 No 2 (2021); 146-153</dc:source><dc:source>1411-8289</dc:source><dc:source>2527-9955</dc:source><dc:language>en</dc:language><dc:relation>https://www.jurnalet.com/jet/article/download/414/371</dc:relation><dc:rights>https://creativecommons.org/licenses/by-nc-sa/4.0/</dc:rights></oai_dc:dc>