Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Biofoam Cassava Starch and Sugarcane Bagasse Cellulose with the Addition of Polyvinyl Alcohol and Chitosan

CHEESA Chemical Engineering Research Articles · Vol. 8 No. 2 (2026) · hlm. 93–102

DOI
10.25273/cheesa.v8i2.22973.93-102
ISSN
2614-8757, 2615-2347
Terbit
2026-03-30
Penerbit
Universitas PGRI Madiun
Bahasa
en
Lisensi
creativecommons.org/licenses/by-nc-sa/4.0/

Abstrak

The persistence of non-biodegradable styrofoam waste is contributing to the development of sustainable packaging materials from renewable resources, such as biofoam from natural biopolymers. Therefore, this study aimed to develop biofoam based on cassava starch and cellulose isolated from sugarcane bagasse, modified with polyvinyl alcohol (PVA) and chitosan. The biofoam was synthesized using a baking process and evaluated for physical and mechanical properties, including water absorption, density, tensile strength, and biodegradability. To examine the effect of formulation, PVA concentrations ranged from 10% to 15%, while chitosan was added at 1.5%, 2.0%, and 2.5%. The result showed that water absorption values ranged from 6.4–14.2%, with densities at 0.370–0.613 g/cm³, tensile strengths 0.030–0.613 MPa, and biodegradability levels 74.4–100% within 14 days. Although the optimal formulation was achieved with 10% PVA and 2.5% chitosan, all samples met the Indonesian National Standard (SNI) for biodegradability, showing potential to replace conventional styrofoam.

Kata kunci

Jaringan kolaborasi para penulis

12 penulis · 25 tautan kepenulisan bersama · 11 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas PGRI Palembang
  • Atma Jaya Catholic University of Indonesia
  • Kementerian Energi dan Sumber Daya Mineral
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
NurmetaniaUniversitas PGRI Palembang1
Muhammad BakrieUniversitas PGRI Palembang1
Reno FitriiyantiUniversitas PGRI Palembang1
M.M. Lanny W. PandjaitanAtma Jaya Catholic University of Indonesia1
Agus Hari WahyudiKementerian Energi dan Sumber Daya Mineral1
Lukas LukasAtma Jaya Catholic University of Indonesia1
Reno FitriyantiUniversitas PGRI Palembang1
Gilang Bagaskara HarlisUniversitas PGRI Palembang1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OpenAlex API (jurnal SINTA, ADR 0048) https://openalex.org/S4210175359, pertama di-harvest 21 Nov 2026, terakhir terlihat 21 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title xml:lang="en">Biofoam Cassava Starch and Sugarcane Bagasse Cellulose with the Addition of Polyvinyl Alcohol and Chitosan</dc:title><dc:creator>Nurul Laila Syarifah</dc:creator><dc:creator>Rully Masriatini</dc:creator><dc:creator>Agus Wahyudi</dc:creator><dc:creator>Muhrinsyah Fatimura</dc:creator><dc:subject>biofoam</dc:subject><dc:subject>cassava starch</dc:subject><dc:subject>polyvinyl alcohol</dc:subject><dc:subject>chitosan</dc:subject><dc:subject>biodegradable packaging</dc:subject><dc:subject>water absorption</dc:subject><dc:subject>tensile strength</dc:subject><dc:subject>density</dc:subject><dc:subject>biodegradability</dc:subject><dc:subject>natural biopolymers</dc:subject><dc:description xml:lang="en">The persistence of non-biodegradable styrofoam waste is contributing to the development of sustainable packaging materials from renewable resources, such as biofoam from natural biopolymers. Therefore, this study aimed to develop biofoam based on cassava starch and cellulose isolated from sugarcane bagasse, modified with polyvinyl alcohol (PVA) and chitosan. The biofoam was synthesized using a baking process and evaluated for physical and mechanical properties, including water absorption, density, tensile strength, and biodegradability. To examine the effect of formulation, PVA concentrations ranged from 10% to 15%, while chitosan was added at 1.5%, 2.0%, and 2.5%. The result showed that water absorption values ranged from 6.4–14.2%, with densities at 0.370–0.613 g/cm³, tensile strengths 0.030–0.613 MPa, and biodegradability levels 74.4–100% within 14 days. Although the optimal formulation was achieved with 10% PVA and 2.5% chitosan, all samples met the Indonesian National Standard (SNI) for biodegradability, showing potential to replace conventional styrofoam.</dc:description><dc:publisher>Universitas PGRI Madiun</dc:publisher><dc:date>2026-03-30</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.25273/cheesa.v8i2.22973.93-102</dc:identifier><dc:identifier>10.25273/cheesa.v8i2.22973.93-102</dc:identifier><dc:source>CHEESA Chemical Engineering Research Articles; Vol 8 No 2 (2026); 93-102</dc:source><dc:source>2614-8757</dc:source><dc:source>2615-2347</dc:source><dc:language>en</dc:language><dc:relation>https://e-journal.unipma.ac.id/index.php/cheesa/article/download/22973/7752</dc:relation><dc:rights>https://creativecommons.org/licenses/by-nc-sa/4.0/</dc:rights></oai_dc:dc>