Akses terbuka
Jurnal
SINTA 1
Effect of Flow Rate on Hexavalent Chromium Reduction in Electroplating Wastewater Using TiO2 Immobilized Resin
CHEESA Chemical Engineering Research Articles · Vol. 8 No. 2 (2026) · hlm. 76–85
ISSN 2614-8757, 2615-2347
Terbit 2026-01-20
Penerbit Universitas PGRI Madiun
Bahasa en
Abstrak
This study aims to analyze the effect of flow rate on the reduction of hexavalent chromium (Cr6+) in electroplating wastewater treated with a TiO2-immobilized resin in a continuous fixed-bed reactor. The electroplating wastewater, characterized by Cr6+, was treated with RIPT-TiO2 functioning as a catalyst to enhance the contaminant degradation process. The flow rate was then examined to observe the effect on the reduction of Cr6+ concentration during the reaction. The results showed that increasing the flow rate within the range of 4070 mL/min affected the reduction of Cr6+, and ultimately influenced the photocatalytic efficiency. The flow rate affected the contact time between the wastewater and the catalyst. The best removal efficiency, reaching 50.83% at 180 minutes, was obtained at a lower flow rate. This study provides important contributions to the development of sustainable and efficient electroplating wastewater treatment technology using a continuous reactor system with a TiO2-immobilized resin.
Jaringan kolaborasi para penulis
6 penulis ·
7 tautan kepenulisan bersama
· 3 lintas organisasi
Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.
Universitas Airlangga University of Pembangunan Nasional Veteran Jawa Timur University of Delhi Afiliasi tidak diketahui
Organisasi berbeda
Organisasi sama
Afiliasi tidak diketahui
Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.
Sumber metadata: OpenAlex API (jurnal SINTA, ADR 0048) https://openalex.org/S4210175359, pertama di-harvest 21 Nov 2026, terakhir terlihat 21 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title xml:lang="en">Effect of Flow Rate on Hexavalent Chromium Reduction in Electroplating Wastewater Using TiO2 Immobilized Resin</dc:title><dc:creator>Arya Darmawan</dc:creator><dc:creator>Okik Hendriyanto Cahyonugroho</dc:creator><dc:creator>Ram Babu Pachwarya</dc:creator><dc:subject>hexavalent chromium</dc:subject><dc:subject>electroplating wastewater</dc:subject><dc:subject>photocatalytic reduction</dc:subject><dc:subject>flow rate</dc:subject><dc:subject>continuous fixed-bed reactor</dc:subject><dc:subject>contact time</dc:subject><dc:subject>chromium removal</dc:subject><dc:subject>wastewater treatment</dc:subject><dc:description xml:lang="en">This study aims to analyze the effect of flow rate on the reduction of hexavalent chromium (Cr6+) in electroplating wastewater treated with a TiO2-immobilized resin in a continuous fixed-bed reactor. The electroplating wastewater, characterized by Cr6+, was treated with RIPT-TiO2 functioning as a catalyst to enhance the contaminant degradation process. The flow rate was then examined to observe the effect on the reduction of Cr6+ concentration during the reaction. The results showed that increasing the flow rate within the range of 4070 mL/min affected the reduction of Cr6+, and ultimately influenced the photocatalytic efficiency. The flow rate affected the contact time between the wastewater and the catalyst. The best removal efficiency, reaching 50.83% at 180 minutes, was obtained at a lower flow rate. This study provides important contributions to the development of sustainable and efficient electroplating wastewater treatment technology using a continuous reactor system with a TiO2-immobilized resin.</dc:description><dc:publisher>Universitas PGRI Madiun</dc:publisher><dc:date>2026-01-20</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.25273/cheesa.v8i2.23102.76-85</dc:identifier><dc:identifier>10.25273/cheesa.v8i2.23102.76-85</dc:identifier><dc:source>CHEESA Chemical Engineering Research Articles; Vol 8 No 2 (2026); 76-85</dc:source><dc:source>2614-8757</dc:source><dc:source>2615-2347</dc:source><dc:language>en</dc:language><dc:relation>https://e-journal.unipma.ac.id/index.php/cheesa/article/download/23102/7608</dc:relation><dc:rights>https://creativecommons.org/licenses/by-nc-sa/4.0/</dc:rights></oai_dc:dc>
Sitasi dan pengindeksan
OpenAlex
Terindeks
lewat ID karya OpenAlex (record dari sumber OpenAlex)
0 sitasi
Crossref
Belum diperiksa
Jumlah menurut tiap indeks pada 21 Nov 2026; setiap indeks menghitung sitasi dengan cara berbeda.
OpenAlex juga mencatat karya ini di: crossref, doaj.
Sitasi artikel ini
APA 7
Darmawan, A., Cahyonugroho, O. H., & Pachwarya, R. B. (2026). Effect of Flow Rate on Hexavalent Chromium Reduction in Electroplating Wastewater Using TiO2 Immobilized Resin. CHEESA Chemical Engineering Research Articles, 8(2), 76–85. https://doi.org/10.25273/cheesa.v8i2.23102.76-85
Salin
IEEE
A. Darmawan, O. H. Cahyonugroho, and R. B. Pachwarya, “Effect of Flow Rate on Hexavalent Chromium Reduction in Electroplating Wastewater Using TiO2 Immobilized Resin,” CHEESA Chemical Engineering Research Articles, vol. 8, no. 2, pp. 76–85, 2026, doi: 10.25273/cheesa.v8i2.23102.76-85.
Salin
Dibuat dari metadata jurnal; periksa nama penulis sebelum dipakai.