Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Hexavalent Chromium Reduction of Artificial Waste Using Resin Immobilized Photocatalyst TiO2

CHEESA Chemical Engineering Research Articles · Vol. 8 No. 2 (2026) · hlm. 86–92

DOI
10.25273/cheesa.v8i2.23078.86-92
ISSN
2614-8757, 2615-2347
Terbit
2026-02-17
Penerbit
Universitas PGRI Madiun
Bahasa
en
Lisensi
creativecommons.org/licenses/by-nc-sa/4.0/

Abstrak

Photocatalysis is a process that can be used to reduce hexavalent chromium in wastewater. Therefore, this study aimed to analyze the effect of a semiconductor in the form of Resin Immobilized Photocatalyst (RIP)-TiO2 on the reduction of Cr (VI), as well as the effect of pH and catalyst mass. In the process, RIP-TiO2 was produced using rutile crystal TiO2 and cation resin. The study was conducted in a column bed with continuous flow and UV lamp irradiation. Sampling was performed every 5, 15, 45, and 60 minutes, as well as the use of 30 and 40 g of RIP-TiO2. The statistical results from a Two-Way Analysis of Variance (ANOVA) showed no significant differences in pH variation and catalyst mass. However, the best operating conditions were obtained at pH 5 and a catalyst mass of 40 g with a removal rate of 21.32%. These results suggested that pH adjustment had no significant effect on the reduction of Cr(VI) to Cr(III) using RIP-TiO₂ catalyst in the photocatalytic process. Further studies are needed to evaluate other factors, such as UV light intensity, contact time, and physical characteristics of the catalyst, capable of improving the efficiency of the RIP-TiO₂ system.

Kata kunci

Jaringan kolaborasi para penulis

7 penulis · 12 tautan kepenulisan bersama · 3 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • University of Pembangunan Nasional Veteran Jawa Timur
  • Saveetha University
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Akbar SujiwaUniversity of Pembangunan Nasional Veteran Jawa Timur1
Nailul HasanUniversity of Pembangunan Nasional Veteran Jawa Timur1
Fajar TimurUniversity of Pembangunan Nasional Veteran Jawa Timur1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OpenAlex API (jurnal SINTA, ADR 0048) https://openalex.org/S4210175359, pertama di-harvest 21 Nov 2026, terakhir terlihat 21 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title xml:lang="en">Hexavalent Chromium Reduction of Artificial Waste Using Resin Immobilized Photocatalyst TiO2</dc:title><dc:creator>Moch. Andy Wibisono</dc:creator><dc:creator>Euis Nurul Hidayah</dc:creator><dc:creator>Baranitharan Ethiraj</dc:creator><dc:creator>Reffany Choiru Rizkiarna</dc:creator><dc:subject>hexavalent chromium reduction</dc:subject><dc:subject>Cr(VI) reduction to Cr(III)</dc:subject><dc:subject>photocatalysis</dc:subject><dc:subject>titanium dioxide</dc:subject><dc:subject>cation exchange resin</dc:subject><dc:subject>synthetic wastewater</dc:subject><dc:subject>pH effect</dc:subject><dc:subject>catalyst mass</dc:subject><dc:subject>UV irradiation</dc:subject><dc:subject>column reactor</dc:subject><dc:subject>heavy metal removal</dc:subject><dc:description xml:lang="en">Photocatalysis is a process that can be used to reduce hexavalent chromium in wastewater. Therefore, this study aimed to analyze the effect of a semiconductor in the form of Resin Immobilized Photocatalyst (RIP)-TiO2 on the reduction of Cr (VI), as well as the effect of pH and catalyst mass. In the process, RIP-TiO2 was produced using rutile crystal TiO2 and cation resin. The study was conducted in a column bed with continuous flow and UV lamp irradiation. Sampling was performed every 5, 15, 45, and 60 minutes, as well as the use of 30 and 40 g of RIP-TiO2. The statistical results from a Two-Way Analysis of Variance (ANOVA) showed no significant differences in pH variation and catalyst mass. However, the best operating conditions were obtained at pH 5 and a catalyst mass of 40 g with a removal rate of 21.32%. These results suggested that pH adjustment had no significant effect on the reduction of Cr(VI) to Cr(III) using RIP-TiO₂ catalyst in the photocatalytic process. Further studies are needed to evaluate other factors, such as UV light intensity, contact time, and physical characteristics of the catalyst, capable of improving the efficiency of the RIP-TiO₂ system.</dc:description><dc:publisher>Universitas PGRI Madiun</dc:publisher><dc:date>2026-02-17</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.25273/cheesa.v8i2.23078.86-92</dc:identifier><dc:identifier>10.25273/cheesa.v8i2.23078.86-92</dc:identifier><dc:source>CHEESA Chemical Engineering Research Articles; Vol 8 No 2 (2026); 86-92</dc:source><dc:source>2614-8757</dc:source><dc:source>2615-2347</dc:source><dc:language>en</dc:language><dc:relation>https://e-journal.unipma.ac.id/index.php/cheesa/article/download/23078/7695</dc:relation><dc:rights>https://creativecommons.org/licenses/by-nc-sa/4.0/</dc:rights></oai_dc:dc>