Melola Discovery

← Melola Discovery

Jurnal

Mechanical Characteristics of Plastic Films Made from Potato Peel Waste (solanum tuberosum L.) with Variations of Acetic Acid and CMC

Tekper : Jurnal Teknologi dan Manajemen Industri Pertanian · Vol. 4 No. 3 (2023) · hlm. 195–202

DOI
10.33772/tekper.v4i3.45193
ISSN
2721-5709
Terbit
2023-12-28
Penerbit
Jurusan Ilmu dan Teknologi Pangan, Fakultas Pertanian,
Bahasa
eng

Abstrak

West Java produces 1,3 thousand million tons of plastic waste per year. Synthetic plastics have component materials that are not environmentally friendly and can decompose for 20 years, therefor handling is required to overcome the accumulation of plastic waste. 3R (reduce, reuse, recycle) is applicable way example using plastic materials that are easily decomposed. Starch in potato skins can be used as a material for bioplastics components, the purpose of this research is to make plastic films made from potato peel waste (Solanum tuberosum L.), as an alternative natural polymer to alternate petroleum materials. Various concentrations of acetic acid (1% and 2%) and variations of carboxymethyl cellulose (1,5 gr and 2,1 gr) were added to the samples and two repetitions, the result of all is 10 samples. Firstly the potato skins were extracted to extract the starch, then the starch was dried at 40 oC for 8 hours. The procedure for making plastic film is to mix the raw materials and gelatinization at 70 oC for 120 minutes. The plastic film is shaped, dried and finally, it does a mechanical test. The research shows that variations of acetic acid and CMC can increase the mechanical properties of tensile strength, elongation at break, thickness, and water uptake. The best plastic film composition was produced using 1% acetic acid and 2,1 gr CMC. The sample has a tensile strength value of 15,72 N/mm2, elongation at break of 14,29%, thickness of 146,17 µm, and water absorption of 365%.

Kata kunci

Jaringan kolaborasi para penulis

8 penulis · 12 tautan kepenulisan bersama · 5 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Diponegoro University
  • Institute for Global Environmental Strategies
  • Bandung Institute of Technology
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Hadiyanto HadiyantoDiponegoro University1
Tutuk Djoko KusworoDiponegoro University1
Muhammad Sonny AbfertiawanBandung Institute of Technology1
Phạm Ngọc BảoInstitute for Global Environmental Strategies1
Pankaj KumarInstitute for Global Environmental Strategies1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://ojs.uho.ac.id/index.php/JMIP/oai, pertama di-harvest 30 Okt 2026, terakhir terlihat 15 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Mechanical Characteristics of Plastic Films Made from Potato Peel Waste (solanum tuberosum L.) with Variations of Acetic Acid and CMC</dc:title>
	<dc:creator>Rahmawati, Fira</dc:creator>
	<dc:creator>Hakim, Muhammad Fahmi</dc:creator>
	<dc:creator>Ni’mah, Kamilah Pathun</dc:creator>
	<dc:subject xml:lang="en-US">Acetic acid, biodegradable, CMC, potato skin, starch</dc:subject>
	<dc:description xml:lang="en-US">West Java produces 1,3 thousand million tons of plastic waste per year. Synthetic plastics have component materials that are not environmentally friendly and can decompose for 20 years, therefor handling is required to overcome the accumulation of plastic waste. 3R (reduce, reuse, recycle) is applicable way example using plastic materials that are easily decomposed. Starch in potato skins can be used as a material for bioplastics components, the purpose of this research is to make plastic films made from potato peel waste (Solanum tuberosum L.), as an alternative natural polymer to alternate petroleum materials. Various concentrations of acetic acid (1% and 2%) and variations of carboxymethyl cellulose (1,5 gr and 2,1 gr) were added to the samples and two repetitions, the result of all is 10 samples. Firstly the potato skins were extracted to extract the starch, then the starch was dried at 40 oC for 8 hours. The procedure for making plastic film is to mix the raw materials and gelatinization at 70 oC for 120 minutes. The plastic film is shaped, dried and finally, it does a mechanical test. The research shows that variations of acetic acid and CMC can increase the mechanical properties of tensile strength, elongation at break, thickness, and water uptake. The best plastic film composition was produced using 1% acetic acid and 2,1 gr CMC. The sample has a tensile strength value of 15,72 N/mm2, elongation at break of 14,29%, thickness of 146,17 µm, and water absorption of 365%.</dc:description>
	<dc:publisher xml:lang="en-US">Jurusan Ilmu dan Teknologi Pangan, Fakultas Pertanian,</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2023-12-28</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs.uho.ac.id/index.php/JMIP/article/view/45193</dc:identifier>
	<dc:identifier>10.33772/tekper.v4i3.45193</dc:identifier>
	<dc:source xml:lang="en-US">Tekper : Jurnal Teknologi dan Manajemen Industri Pertanian; Vol 4, No 3 (2023): Desember - Tekper: Jurnal Teknologi dan Manajemen Industri Pertanian; 195 - 202</dc:source>
	<dc:source>2721-5709</dc:source>
	<dc:source>10.33772/tekper.v4i3</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs.uho.ac.id/index.php/JMIP/article/view/45193/pdf</dc:relation>
	<dc:relation>https://ojs.uho.ac.id/index.php/JMIP/article/downloadSuppFile/45193/96174</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2024 Tekper : Jurnal Teknologi dan Manajemen Industri Pertanian</dc:rights>
</oai_dc:dc>