Melola Discovery

← Melola Discovery

Akses terbuka Jurnal Tanpa peringkat SINTA

Pembuatan Sistem Kontrol Otomatis pada Mesin Press Plastik Berbasis PLC di PT. Laksana Teknik Makmur

Jurnal Fokus Elektroda : Energi Listrik, Telekomunikasi, Komputer, Elektronika dan Kendali) · Vol. 7 No. 1 (2022) · hlm. 7–12

DOI
10.33772/jfe.v7i1.23438
ISSN
2502-5562
Terbit
2022-02-27
Penerbit
Universitas Halu Oleo
Bahasa
eng
Lisensi
creativecommons.org/licenses/by/4.0

Abstrak

Laksana Tekhnik Makmur Tbk. is a manufacturing company that produces marine interiors and automotive accessories. The company usually uses a continuous sealer machine for plastic production processes. The continuous sealer machine is a plastic press machine that can automatically glue plastic packaging and aluminum foil. The plastic press process on this continuous sealer machine requires three persons as the operator and four work steps, namely, pressing the bottom plastic, installing the iron clip on the top, pressing the plastic on the top, and removing the iron clip. In these work steps, the plastic sealer press process is carried out twice in a product. These steps waste time and operator cause the plastic press process is inefficient. The problem from a continuous sealer machine was replaced by making an automatic control system on the plastic hot press machine. This machine will reduce the number of working steps from four working steps to two working steps. So that it can reduce the cycle time by 75% and increase the production of plastic presses by 24,000 pcs a day.

Kata kunci

Jaringan kolaborasi para penulis

2 penulis · 1 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Politeknik Astra
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Mada Jimmy Fonda ArifiantoPoliteknik Astra1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://ojs.uho.ac.id/index.php/JFE/oai, pertama di-harvest 31 Okt 2026, terakhir terlihat 15 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Pembuatan Sistem Kontrol Otomatis pada Mesin Press Plastik Berbasis PLC di PT. Laksana Teknik Makmur</dc:title>
	<dc:creator>Prasetyani, Lin</dc:creator>
	<dc:subject xml:lang="en-US">plastic press machine, PLC, cycle time, control system.</dc:subject>
	<dc:description xml:lang="en-US">Laksana Tekhnik Makmur Tbk. is a manufacturing company that produces marine interiors and automotive accessories. The company usually uses a continuous sealer machine for plastic production processes. The continuous sealer machine is a plastic press machine that can automatically glue plastic packaging and aluminum foil. The plastic press process on this continuous sealer machine requires three persons as the operator and four work steps, namely, pressing the bottom plastic, installing the iron clip on the top, pressing the plastic on the top, and removing the iron clip. In these work steps, the plastic sealer press process is carried out twice in a product. These steps waste time and operator cause the plastic press process is inefficient. The problem from a continuous sealer machine was replaced by making an automatic control system on the plastic hot press machine. This machine will reduce the number of working steps from four working steps to two working steps. So that it can reduce the cycle time by 75% and increase the production of plastic presses by 24,000 pcs a day.</dc:description>
	<dc:publisher xml:lang="en-US">Universitas Halu Oleo</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2022-02-27</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs.uho.ac.id/index.php/JFE/article/view/23438</dc:identifier>
	<dc:identifier>10.33772/jfe.v7i1.23438</dc:identifier>
	<dc:source xml:lang="en-US">Jurnal Fokus Elektroda : Energi Listrik, Telekomunikasi, Komputer, Elektronika dan Kendali); Vol 7, No 1 (2022): Jurnal Elektroda Vol 7 No 1; 7-12</dc:source>
	<dc:source>2502-5562</dc:source>
	<dc:source>10.33772/jfe.v7i1</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs.uho.ac.id/index.php/JFE/article/view/23438/pdf</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2022 Lin Prasetyani</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by/4.0</dc:rights>
</oai_dc:dc>