Melola Discovery

← Melola Discovery

Jurnal

Analisa Sifat Mekanik Resin Dengan Variasi Komposisi Hardener

Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin · Vol. 4 No. 4 (2019)

DOI
10.55679/enthalpy.v4i4.10013
ISSN
2502-8944
Published
2019-12-31
Publisher
Teknik Mesin Universitas Halu Oleo
Language
eng

Abstract

The purpose of this research is to find out the ideal mixture composition in theprocess of making polyester in thermoset polymers, where the composition of this mixture will have high tensile strength and bending strength. This thermosetpolymer is made by mixing polyester resin with hardener, varying between 1 %, 2 %, 4 %, and 7 %. Polyester resins that have been mixed with hardener are poured into the mold. After drying, the polymer is input into the mold to be pressed and curing. After drying, a tensile test specimen and bending test are made. Tensile testing is carried out using the ASTM D 638-02 type 4 standard, and bending testing is carried out with ASTM D709-02 type 4 standard. From the results of testing the tensile strength and bending strength obtained the maximum strength found in the mixture composition of 93:7 % with a value of 30.69 N/mm2 and 70.634 N/mm2 respectively.Keywords: Resin, hardener, tensile strength, bending, polymer

Collaboration network of the authors

40 authors · 175 co-authorship links · 5 across different organisations · showing the 40 most connected

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Universitas Halu Oleo
  • Universitas Syiah Kuala
  • Universitas Islam Negeri Mahmud Yunus Batusangkar
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Aminur AminurUniversitas Halu Oleo11
Budiman SudiaAffiliation unknown8
Prinob AksarUniversitas Halu Oleo7
Al Ichlas ImranAffiliation unknown6
Samhuddin SamhuddinAffiliation unknown4
Abd KadirUniversitas Halu Oleo4
Yuspian GunawanAffiliation unknown4
La Ode Ahmad BarataAffiliation unknown4
Muhammad HasbiUniversitas Syiah Kuala4
Ridway BalakaAffiliation unknown3
Salimin SaliminAffiliation unknown3
Kadir KadirAffiliation unknown3
La HasanudinUniversitas Halu Oleo2
Muhammad IkhsanAffiliation unknown2
Samidun SamidunAffiliation unknown2
Emil SalimUniversitas Halu Oleo1
Muhammad Alfito RamadhanAffiliation unknown1
Ahmad FatsanAffiliation unknown1
Diny DinartiAffiliation unknown1
Ismail MaskromoAffiliation unknown1
Budiman SadiaAffiliation unknown1
Nanang EndriantoAffiliation unknown1
Prinob Aksar AksarAffiliation unknown1
Jaka Seru Dwi SaputraAffiliation unknown1
Irma NurjannahAffiliation unknown1
Luther PagilingAffiliation unknown1
Ld.M.Golok JayaAffiliation unknown1
Agustan AgustanUniversitas Halu Oleo1
Edward NgiiUniversitas Halu Oleo1
Achmad Nur AliansyahAffiliation unknown1
Lukas Kano MangalaAffiliation unknown1
Bayu Hari AnggaraAffiliation unknown1
Andi YantoAffiliation unknown1
Andi Tri SetiawanAffiliation unknown1
Risal RisalAffiliation unknown1
Irwan IrwanUniversitas Islam Negeri Mahmud Yunus Batusangkar1
Sarudin SarudinAffiliation unknown1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://ojs.uho.ac.id/index.php/ENTHALPY/oai, first harvested 31 Okt 2026, last seen 31 Okt 2026.
Original metadata (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Analisa Sifat Mekanik Resin Dengan Variasi Komposisi Hardener</dc:title>
	<dc:creator>Sughiandi, Rachmad</dc:creator>
	<dc:creator>Sudarsono, Sudarsono</dc:creator>
	<dc:creator>Endriatno, Nanang</dc:creator>
	<dc:description xml:lang="en-US">The purpose of this research is to find out the ideal mixture composition in theprocess of making polyester in thermoset polymers, where the composition of this mixture will have high tensile strength and bending strength. This thermosetpolymer is made by mixing polyester resin with hardener, varying between 1 %, 2 %, 4 %, and 7 %. Polyester resins that have been mixed with hardener are poured into the mold. After drying, the polymer is input into the mold to be pressed and curing. After drying, a tensile test specimen and bending test are made. Tensile testing is carried out using the ASTM D 638-02 type 4 standard, and bending testing is carried out with ASTM D709-02 type 4 standard. From the results of testing the tensile strength and bending strength obtained the maximum strength found in the mixture composition of 93:7 % with a value of 30.69 N/mm2 and 70.634 N/mm2 respectively.Keywords: Resin, hardener, tensile strength, bending, polymer</dc:description>
	<dc:publisher xml:lang="en-US">Teknik Mesin Universitas Halu Oleo</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2019-12-31</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/10013</dc:identifier>
	<dc:identifier>10.55679/enthalpy.v4i4.10013</dc:identifier>
	<dc:source xml:lang="en-US">Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin; Vol 4, No 4 (2019): Enthalpy: Jurnal Ilmiah Mahasiswa Teknik Mesin</dc:source>
	<dc:source>2502-8944</dc:source>
	<dc:source>10.55679/enthalpy.v4i4</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/10013/7152</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2019 ENTHALPY</dc:rights>
</oai_dc:dc>