Melola Discovery

← Melola Discovery

Jurnal

Rancang Bangun Pompa Torak Dengan Sistem Penggerak Kincir Air Untuk Pengairan Lahan Pertanian

Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin · Vol. 8 No. 1 (2023) · pp. 1–11

DOI
10.55679/enthalpy.v8i1.29814
ISSN
2502-8944
Published
2023-02-28
Publisher
Teknik Mesin Universitas Halu Oleo
Language
eng

Abstract

Indonesia has large water sources, but cannot be fully utilized, for example in the agricultural sector because of the difference in land height and water sources, in connection with that we need pumps that can be used to supply water to the land. The purpose of this research is to design, manufacture pumps, determine the materials used and their strengths, and determine the power generated. Research methods include the design and manufacture of pumps as well as material selection and strength calculations. The results showed that the material for the piston was galvanized pipe with a tensile stress of 330 N/mm2, 3mm thick, the piston rod was a bolt with a tensile stress of 60 N/mm2, the cylinder used PVC pipe with a tensile stress of 21.933 N/mm2, 4.5 mm thick., the connecting rod and shaft are made of standard assental iron with a tensile stress of 568.7 N/mm2, the sprocket uses a standard spretpat motor with a tensile stress of 509.94 N/mm2, and the chain uses a motor chain, length 1035.5 mm, tensile stress 608.01 N/mm2 and the power generated is 46.96 watts.Kata kunci: alternative, design, pump, reciprocating pump

Collaboration network of the authors

40 authors · 191 co-authorship links · 3 across different organisations · showing the 40 most connected

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Universitas Halu Oleo
  • Universitas Islam Negeri Mahmud Yunus Batusangkar
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Aminur AminurUniversitas Halu Oleo7
Abd KadirUniversitas Halu Oleo6
Agustinus LolokAffiliation unknown5
Budiman SudiaAffiliation unknown5
Kadir KadirAffiliation unknown4
Samhuddin SamhuddinAffiliation unknown4
Prinob AksarUniversitas Halu Oleo4
Al Ichlas ImranAffiliation unknown3
Ridway BalakaAffiliation unknown3
Lukas Kano MangallaUniversitas Halu Oleo3
Yuspian GunawanAffiliation unknown3
Salimin SaliminAffiliation unknown2
Aldiyanto AldiyantoAffiliation unknown1
Adib SatonoUniversitas Halu Oleo1
Kadek Edy SusantoUniversitas Halu Oleo1
Wandi HaryansaUniversitas Halu Oleo1
Rival Kahfi GamaUniversitas Halu Oleo1
Mirna PratiwiwahyuniAffiliation unknown1
Laode SafiuddinAffiliation unknown1
La Ode M Golok JayaAffiliation unknown1
Tufaila HemonAffiliation unknown1
Sudarsono SudarsonoAffiliation unknown1
Budiman SadiaAffiliation unknown1
Nanang EndriantoAffiliation unknown1
Laode SaefuddinAffiliation unknown1
Adnal AdnalAffiliation unknown1
La Ode Ahmad BarataAffiliation unknown1
Jaka Seru Dwi SaputraAffiliation unknown1
Isran IsranAffiliation unknown1
Irwan IrwanUniversitas Islam Negeri Mahmud Yunus Batusangkar1
Nanang EndriatnoAffiliation unknown1
Ramadhan RamadhanAffiliation unknown1
Andi SuhermanAffiliation unknown1
Muhlas Adi PutraAffiliation unknown1
Rasyid RasminAffiliation unknown1
Muhammad FirsanAffiliation unknown1
Andi WiwinAffiliation unknown1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://ojs.uho.ac.id/index.php/ENTHALPY/oai, first harvested 31 Okt 2026, last seen 1 Nov 2026.
Original metadata (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Rancang Bangun Pompa Torak Dengan Sistem Penggerak Kincir Air Untuk Pengairan Lahan Pertanian</dc:title>
	<dc:creator>Hendra, Hendra</dc:creator>
	<dc:creator>Sisworo, Raden Sisworo</dc:creator>
	<dc:creator>Hasanudin, La</dc:creator>
	<dc:description xml:lang="en-US">Indonesia has large water sources, but cannot be fully utilized, for example in the agricultural sector because of the difference in land height and water sources, in connection with that we need pumps that can be used to supply water to the land. The purpose of this research is to design, manufacture pumps, determine the materials used and their strengths, and determine the power generated. Research methods include the design and manufacture of pumps as well as material selection and strength calculations. The results showed that the material for the piston was galvanized pipe with a tensile stress of 330 N/mm2, 3mm thick, the piston rod was a bolt with a tensile stress of 60 N/mm2, the cylinder used PVC pipe with a tensile stress of 21.933 N/mm2, 4.5 mm thick. , the connecting rod and shaft are made of standard assental iron with a tensile stress of 568.7 N/mm2, the sprocket uses a standard spretpat motor with a tensile stress of 509.94 N/mm2, and the chain uses a motor chain, length 1035.5 mm, tensile stress 608.01 N/mm2 and the power generated is 46.96 watts.Kata kunci: alternative, design, pump, reciprocating pump </dc:description>
	<dc:publisher xml:lang="en-US">Teknik Mesin Universitas Halu Oleo</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2023-02-28</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/29814</dc:identifier>
	<dc:identifier>10.55679/enthalpy.v8i1.29814</dc:identifier>
	<dc:source xml:lang="en-US">Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin; Vol 8, No 1 (2023): Enthalpy: Jurnal Ilmiah Mahasiswa Teknik Mesin; 1-11</dc:source>
	<dc:source>2502-8944</dc:source>
	<dc:source>10.55679/enthalpy.v8i1</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/29814/17698</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2023 Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin</dc:rights>
</oai_dc:dc>