Melola Discovery

← Melola Discovery

Jurnal

Karakteristik Tegangan dan Regangan Tarik Pada Komposit CFRP Yang Berlubang

Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin · Vol. 6 No. 3 (2021) · pp. 100–106

DOI
10.55679/enthalpy.v6i3.20975
ISSN
2502-8944
Published
2021-10-07
Publisher
Teknik Mesin Universitas Halu Oleo
Language
eng

Abstract

In the industrial world, the development of material technology is growing rapidly. There is an increasing demand for materials with certain properties such as perforated composites. The consideration of perforated composites is an important parameter in the design of composite components. The purpose of this study was to determine the tensile stress and strain characteristics of hollow CFRP composites. The research method used is to analyze the tensile test using abaqus software, the tensile test analysis is carried out with 3 variations in the diameter of the hole (2 mm, 4 mm, and 6 mm). From the tensile test simulation results, it is found that the highest stress occurs in the 6 mm diameter composite with a maximum stress value of 180.4 N/mm², and the lowest stress occurs in the 2 mm diameter composite with a maximum stress value of 102.6 N/mm². The highest stress and strain that occurs in each specimen is located on the edge of the hole perpendicular to the direction of the force, the stress and strain increase based on the diameter of the hole in the composite, the larger the diameter in the composite, the greater the stress that occurs..Keywords: Tensile test, CFRP composite, abaqus software

Collaboration network of the authors

40 authors · 174 co-authorship links · 3 across different organisations · showing the 40 most connected

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Universitas Halu Oleo
  • Institut Agama Islam Negeri Kendari
  • Universitas Syiah Kuala
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Aminur AminurUniversitas Halu Oleo11
Budiman SudiaAffiliation unknown8
Prinob AksarUniversitas Halu Oleo7
Al Ichlas ImranAffiliation unknown6
Samhuddin SamhuddinAffiliation unknown4
Abd KadirUniversitas Halu Oleo4
Yuspian GunawanAffiliation unknown4
La Ode Ahmad BarataAffiliation unknown4
Muhammad HasbiUniversitas Syiah Kuala4
Ridway BalakaAffiliation unknown3
Salimin SaliminAffiliation unknown3
Kadir KadirAffiliation unknown3
La HasanudinUniversitas Halu Oleo2
Rachmad SughiandiAffiliation unknown2
Akhmad SukardiInstitut Agama Islam Negeri Kendari1
Widya NingsihInstitut Agama Islam Negeri Kendari1
Devi HanisaInstitut Agama Islam Negeri Kendari1
Emil SalimUniversitas Halu Oleo1
Muhammad Alfito RamadhanAffiliation unknown1
Ahmad FatsanAffiliation unknown1
Diny DinartiAffiliation unknown1
Ismail MaskromoAffiliation unknown1
Budiman SadiaAffiliation unknown1
Nanang EndriantoAffiliation unknown1
Prinob Aksar AksarAffiliation unknown1
Jaka Seru Dwi SaputraAffiliation unknown1
Irma NurjannahAffiliation unknown1
Luther PagilingAffiliation unknown1
Ld.M.Golok JayaAffiliation unknown1
Agustan AgustanUniversitas Halu Oleo1
Edward NgiiUniversitas Halu Oleo1
Achmad Nur AliansyahAffiliation unknown1
Lukas Kano MangalaAffiliation unknown1
Bayu Hari AnggaraAffiliation unknown1
Andi YantoAffiliation unknown1
Andi Tri SetiawanAffiliation unknown1
Risal RisalAffiliation unknown1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://ojs.uho.ac.id/index.php/ENTHALPY/oai, first harvested 31 Okt 2026, last seen 31 Okt 2026.
Original metadata (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Karakteristik Tegangan dan Regangan Tarik Pada Komposit CFRP Yang Berlubang</dc:title>
	<dc:creator>Ikhsan, Muhammad</dc:creator>
	<dc:creator>Sudarsono, Sudarsono</dc:creator>
	<dc:creator>Endriatno, Nanang</dc:creator>
	<dc:description xml:lang="en-US">In the industrial world, the development of material technology is growing rapidly. There is an increasing demand for materials with certain properties such as perforated composites. The consideration of perforated composites is an important parameter in the design of composite components. The purpose of this study was to determine the tensile stress and strain characteristics of hollow CFRP composites. The research method used is to analyze the tensile test using abaqus software, the tensile test analysis is carried out with 3 variations in the diameter of the hole (2 mm, 4 mm, and 6 mm). From the tensile test simulation results, it is found that the highest stress occurs in the 6 mm diameter composite with a maximum stress value of 180.4 N/mm², and the lowest stress occurs in the 2 mm diameter composite with a maximum stress value of 102.6 N/mm². The highest stress and strain that occurs in each specimen is located on the edge of the hole perpendicular to the direction of the force, the stress and strain increase based on the diameter of the hole in the composite, the larger the diameter in the composite, the greater the stress that occurs..Keywords: Tensile test, CFRP composite, abaqus software</dc:description>
	<dc:publisher xml:lang="en-US">Teknik Mesin Universitas Halu Oleo</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2021-10-07</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/20975</dc:identifier>
	<dc:identifier>10.55679/enthalpy.v6i3.20975</dc:identifier>
	<dc:source xml:lang="en-US">Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin; Vol 6, No 3 (2021): Enthalpy: Jurnal Ilmiah Mahasiswa Teknik Mesin; 100-106</dc:source>
	<dc:source>2502-8944</dc:source>
	<dc:source>10.55679/enthalpy.v6i3</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/20975/13001</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2021 ENTHALPY</dc:rights>
</oai_dc:dc>