Melola Discovery

← Melola Discovery

Jurnal

Studi Kecepatan Spindel Mesin Bubut Terhadap Nilai Unit Horse Power (UHP) Pada Proses Pembubutan Baja Karbon Rendah

Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin · Vol. 6 No. 3 (2021) · pp. 133–142

DOI
10.55679/enthalpy.v6i3.21028
ISSN
2502-8944
Published
2021-10-07
Publisher
Teknik Mesin Universitas Halu Oleo
Language
eng

Abstract

The machining process is a manufacturing process where the main process is removing or removing some of the material from a basic material which can be in the form of a shaft so that it meets the desired shape and quality. The purpose of this study was to determine the effect of the rotational speed of the lathe spindle on the value of Unit Horse Power (UHP) in the low carbon steel turning process. The study used carbon steel material in the form of a cylinder with an initial diameter of 40 mm and a length of 150 mm. The cylindrical workpiece is turned with a depth of 1 mm at various speeds, namely 95 rpm, 130 rpm and 180 rpm. The results showed that the rotational speed of the lathe spindle affects the value of the unit horse power (UHP). The higher the spindle rotation of the lathe, the greater the UHP obtained, where the highest UHP occurs at 180 rpm with a UHP value of 0.00030 and the lowest UHP. found in round 130 with a UHP value of 0.00016. High rotation causes a large force so that the vibration of the lathe tool is even greater.Keywords: Lathe process, carbon steel, spindle rotation.

Collaboration network of the authors

40 authors · 235 co-authorship links · 3 across different organisations · showing the 40 most connected

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Universitas Halu Oleo
  • Universitas Syiah Kuala
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Budiman SudiaAffiliation unknown20
Abd KadirUniversitas Halu Oleo13
Al Ichlas ImranAffiliation unknown13
Prinob AksarUniversitas Halu Oleo12
La HasanudinUniversitas Halu Oleo11
Kadir KadirAffiliation unknown11
Sudarsono SudarsonoAffiliation unknown10
Yuspian GunawanAffiliation unknown9
Ridway BalakaAffiliation unknown8
Salimin SaliminAffiliation unknown7
Agustinus LolokAffiliation unknown6
Lukas Kano MangallaUniversitas Halu Oleo5
La HasanuddinAffiliation unknown5
Nanang EndriatnoAffiliation unknown5
Raden Rinova SisworoUniversitas Halu Oleo4
La Ode Ahmad BarataAffiliation unknown4
Muhammad HasbiUniversitas Syiah Kuala4
Jaka Seru Dwi SaputraAffiliation unknown3
R BalakaAffiliation unknown2
La Ode Amrul HasanAffiliation unknown2
Budiman SadiaAffiliation unknown2
Nanang EndriantoAffiliation unknown2
Emil SalimUniversitas Halu Oleo1
Muhammad Alfito RamadhanAffiliation unknown1
Melkysedekh S.P.Universitas Halu Oleo1
Janur RamadanUniversitas Halu Oleo1
Gafarudin La HidiUniversitas Halu Oleo1
Aldiyanto AldiyantoAffiliation unknown1
Adib SatonoUniversitas Halu Oleo1
Kadek Edy SusantoUniversitas Halu Oleo1
Wandi HaryansaUniversitas Halu Oleo1
Rival Kahfi GamaUniversitas Halu Oleo1
SITTI ROSYIDAHAffiliation unknown1
Muhammad Zakaria UmarAffiliation unknown1
Muhammad ArsyadUniversitas Halu Oleo1
Mazhfia UmarAffiliation unknown1
Asad SyahdanAffiliation unknown1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://ojs.uho.ac.id/index.php/ENTHALPY/oai, first harvested 31 Okt 2026, last seen 31 Okt 2026.
Original metadata (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Studi Kecepatan Spindel Mesin Bubut Terhadap Nilai Unit Horse Power (UHP) Pada Proses Pembubutan Baja Karbon Rendah</dc:title>
	<dc:creator>Saputra, Fahri Ari</dc:creator>
	<dc:creator>Samhuddin, Samhuddin</dc:creator>
	<dc:creator>Aminur, Aminur</dc:creator>
	<dc:description xml:lang="en-US">The machining process is a manufacturing process where the main process is removing or removing some of the material from a basic material which can be in the form of a shaft so that it meets the desired shape and quality. The purpose of this study was to determine the effect of the rotational speed of the lathe spindle on the value of Unit Horse Power (UHP) in the low carbon steel turning process. The study used carbon steel material in the form of a cylinder with an initial diameter of 40 mm and a length of 150 mm. The cylindrical workpiece is turned with a depth of 1 mm at various speeds, namely 95 rpm, 130 rpm and 180 rpm. The results showed that the rotational speed of the lathe spindle affects the value of the unit horse power (UHP). The higher the spindle rotation of the lathe, the greater the UHP obtained, where the highest UHP occurs at 180 rpm with a UHP value of 0.00030 and the lowest UHP. found in round 130 with a UHP value of 0.00016. High rotation causes a large force so that the vibration of the lathe tool is even greater.Keywords: Lathe process, carbon steel, spindle rotation.</dc:description>
	<dc:publisher xml:lang="en-US">Teknik Mesin Universitas Halu Oleo</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2021-10-07</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/21028</dc:identifier>
	<dc:identifier>10.55679/enthalpy.v6i3.21028</dc:identifier>
	<dc:source xml:lang="en-US">Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin; Vol 6, No 3 (2021): Enthalpy: Jurnal Ilmiah Mahasiswa Teknik Mesin; 133-142</dc:source>
	<dc:source>2502-8944</dc:source>
	<dc:source>10.55679/enthalpy.v6i3</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/21028/13031</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2021 ENTHALPY</dc:rights>
</oai_dc:dc>