Heat pipe exchanger is a heat exchanger by utilizing latent heat in its work. The heat pipe is in the form of a pipe with a working fluid inside. There are 3 parts to this heat exchanger, namely the evaporator, adiabatic and condenser. Heat enters through the evaporator section, the fluid in the pipe moves towards the condenser by changing phase to vapor and releases heat through the condenser. After removing the heat, it changes phase again to liquid and returns to the evaporator section. This is because there is capillary action on the wick wall. The wick wall is a layer that surrounds the heat pipe wall to help the fluid return from the condenser section to the evaporator section. This study aims to determine the performance of heat pipes with variations in wick wall thickness and input temperature. The heat pipe heat exchanger is designed with a wick wall thickness variation of 1 mm; 1.5mm and 2mm. The incoming input temperature is 800 C, 100 0 C, 120 0 C. The research shows that the thicker the wick wall and the greater the input temperature, the lower the end to end, the smaller the thermal resistance, the greater the heat flux and the greater the power. generated output. The largest output power (26 W) is at wick 2 wall thickness and the input temperature is 1200Csaja.
Jaringan kolaborasi para penulis
7 penulis ·
21 tautan kepenulisan bersama
· 6 lintas organisasi
Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.
Politeknik Negeri Malang
Politeknik Negeri Semarang
Organisasi berbeda
Organisasi sama
Afiliasi tidak diketahui
Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.