Melola Discovery

← Melola Discovery

Jurnal

Analisis Kekuatan Tarik Material Komposit Berpenguat Ampas Pengolahan Sagu

Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin · Vol. 7 No. 4 (2022) · pp. 151–157

DOI
10.55679/enthalpy.v7i4.28335
ISSN
2502-8944
Published
2022-12-23
Publisher
Teknik Mesin Universitas Halu Oleo
Language
eng

Abstract

In the industrial world, the development of material technology is growing rapidly. Various kinds of materials have been used and further research is being carried out to obtain the right materials, one of which is composite materials. The purpose of this study was to determine the effect of the tensile strength of the composite material reinforced with sago pulp. In this study, the manufacture of composites using the hand lay up method. then the fiber is given alkaline treatment by soaking in a solution of NaOH (Sodium Hydroxide) with a concentration of 5% for 1 hour, 2 hours and without treatment. From the results obtained, immersion for 1 hour has the highest tensile stress of 10,456 N/mm², followed by immersion for 2 hours of tensile stress of 7.189 N/mm². While without treatment has the lowest tensile stress of 4.955 N/mm². This shows that the treatment will affect the tensile stress.Kata kunci: Sago drgs,tensile strength,alkali

Collaboration network of the authors

40 authors · 233 co-authorship links · 3 across different organisations · showing the 40 most connected

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Universitas Halu Oleo
  • Universitas Syiah Kuala
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Budiman SudiaAffiliation unknown20
Aminur AminurUniversitas Halu Oleo13
Yuspian GunawanAffiliation unknown13
Abd KadirUniversitas Halu Oleo11
Salimin SaliminAffiliation unknown11
Al Ichlas ImranAffiliation unknown9
La HasanudinUniversitas Halu Oleo8
Kadir KadirAffiliation unknown7
Sudarsono SudarsonoAffiliation unknown7
Lukas Kano MangallaUniversitas Halu Oleo6
Muhammad HasbiUniversitas Syiah Kuala6
Ridway BalakaAffiliation unknown6
La HasanuddinAffiliation unknown5
Jaka Seru Dwi SaputraAffiliation unknown5
Raden Rinova SisworoUniversitas Halu Oleo4
Nanang EndriatnoAffiliation unknown4
R BalakaAffiliation unknown3
Edward NgiiUniversitas Halu Oleo2
Agustinus LolokAffiliation unknown2
Raden Rinova SisworoAffiliation unknown2
La Ode Ahmad BarataAffiliation unknown2
Robin RobinUniversitas Halu Oleo1
SITTI ROSYIDAHAffiliation unknown1
Muhammad Zakaria UmarAffiliation unknown1
Muhammad ArsyadUniversitas Halu Oleo1
Mazhfia UmarAffiliation unknown1
La Ode Amrul HasanAffiliation unknown1
Budiman SadiaAffiliation unknown1
Nanang EndriantoAffiliation unknown1
Asad SyahdanAffiliation unknown1
Sartirlan AliAffiliation unknown1
Agustan AgustanUniversitas Halu Oleo1
Achmad Nur AliansyahAffiliation unknown1
P AksarAffiliation unknown1
C YusnidarsyahAffiliation unknown1
Safarno SafarnoAffiliation unknown1
Mufli MufliUniversitas Halu Oleo1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://ojs.uho.ac.id/index.php/ENTHALPY/oai, first harvested 31 Okt 2026, last seen 31 Okt 2026.
Original metadata (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Analisis Kekuatan Tarik Material Komposit Berpenguat Ampas Pengolahan Sagu</dc:title>
	<dc:creator>Saleh, La Ode Muhamad</dc:creator>
	<dc:creator>Samhuddin, Samhuddin</dc:creator>
	<dc:creator>Aksar, Prinob</dc:creator>
	<dc:description xml:lang="en-US">In the industrial world, the development of material technology is growing rapidly. Various kinds of materials have been used and further research is being carried out to obtain the right materials, one of which is composite materials. The purpose of this study was to determine the effect of the tensile strength of the composite material reinforced with sago pulp. In this study, the manufacture of composites using the hand lay up method. then the fiber is given alkaline treatment by soaking in a solution of NaOH (Sodium Hydroxide) with a concentration of 5% for 1 hour, 2 hours and without treatment. From the results obtained, immersion for 1 hour has the highest tensile stress of 10,456 N/mm², followed by immersion for 2 hours of tensile stress of 7.189 N/mm². While without treatment has the lowest tensile stress of 4.955 N/mm². This shows that the treatment will affect the tensile stress.Kata kunci: Sago drgs,tensile strength,alkali</dc:description>
	<dc:publisher xml:lang="en-US">Teknik Mesin Universitas Halu Oleo</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2022-12-23</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/28335</dc:identifier>
	<dc:identifier>10.55679/enthalpy.v7i4.28335</dc:identifier>
	<dc:source xml:lang="en-US">Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin; Vol 7, No 4 (2022): Enthalpy: Jurnal Ilmiah Mahasiswa Teknik Mesin; 151-157</dc:source>
	<dc:source>2502-8944</dc:source>
	<dc:source>10.55679/enthalpy.v7i4</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/28335/16831</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2022 Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin</dc:rights>
</oai_dc:dc>