Melola Discovery

← Melola Discovery

Jurnal

PERENCANAAN SISTEM TRANSMISI ALAT PENIRIS PADA MESIN PENGERING HELM

Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin · Vol. 3 No. 1 (2018)

DOI
10.55679/enthalpy.v3i1.3629
ISSN
2502-8944
Published
2018-01-27
Publisher
Teknik Mesin Universitas Halu Oleo
Language
eng

Abstract

A helmet drying machine is a device used to dry a helmet in a relatively short time. This helmet dryingmachine is divided into two parts namely: slicer/extortion machine and dryer. This slicer/squeezer machineserves to reduce the water content contained in the helmet up to 60-80%. In planning theoretically discussthe main components of the slicer transmission system on the helmet drying machine that determines: thediameter of pulley, the rotation ratio of the pulley, the shaft axis distance, the shaft diameter of the pulley II,and the bearing number. From the calculation results obtained as follows: 0.25 HP motor crusher power,electric motor rotation 1400 rpm, diameter pulley I 65 mm, diameter pulley II 130 mm, rotation ratio at 1:2pulleys, distance between the axis 251.32 mm axis, the diameter of the shaft on the pulley II 20 mm, and thenumber of open type 6004 bearings.Keywords: transmission system, pulleys and belts, shaft and bearing.

Collaboration network of the authors

40 authors · 240 co-authorship links · 3 across different organisations · showing the 40 most connected

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Universitas Halu Oleo
  • Universitas Syiah Kuala
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Budiman SudiaAffiliation unknown16
Prinob AksarUniversitas Halu Oleo12
Aminur AminurUniversitas Halu Oleo11
Abd KadirUniversitas Halu Oleo10
Kadir KadirAffiliation unknown9
Al Ichlas ImranAffiliation unknown8
Yuspian GunawanAffiliation unknown7
Salimin SaliminAffiliation unknown6
Lukas Kano MangallaUniversitas Halu Oleo5
Sudarsono SudarsonoAffiliation unknown5
La HasanuddinAffiliation unknown4
La HasanudinUniversitas Halu Oleo4
Ridway BalakaAffiliation unknown3
Raden Rinova SisworoUniversitas Halu Oleo3
Jenny DellyAffiliation unknown3
Aditya RachmanAffiliation unknown3
Nanang EndriatnoAffiliation unknown3
R BalakaAffiliation unknown2
Jaka Seru Dwi SaputraAffiliation unknown2
Ardian SyahputraAffiliation unknown1
Ardian SyahputraUniversitas Syiah Kuala1
Usman UsmanUniversitas Syiah Kuala1
Erni MaidiyahUniversitas Syiah Kuala1
SITTI ROSYIDAHAffiliation unknown1
Muhammad Zakaria UmarAffiliation unknown1
Muhammad ArsyadUniversitas Halu Oleo1
Mazhfia UmarAffiliation unknown1
La Ode Amrul HasanAffiliation unknown1
Agustinus LolokAffiliation unknown1
Budiman SadiaAffiliation unknown1
Nanang EndriantoAffiliation unknown1
Asad SyahdanAffiliation unknown1
Sartirlan AliAffiliation unknown1
Raden Rinova SisworoAffiliation unknown1
Irma NurjannahAffiliation unknown1
Luther PagilingAffiliation unknown1
Ld.M.Golok JayaAffiliation unknown1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://ojs.uho.ac.id/index.php/ENTHALPY/oai, first harvested 31 Okt 2026, last seen 1 Nov 2026.
Original metadata (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">PERENCANAAN SISTEM TRANSMISI ALAT PENIRIS PADA MESIN PENGERING HELM</dc:title>
	<dc:creator>Samhuddin, Samhuddin</dc:creator>
	<dc:creator>Hasbi, Muhammad</dc:creator>
	<dc:creator>Jamiluddin, Jamiluddin</dc:creator>
	<dc:description xml:lang="en-US">A helmet drying machine is a device used to dry a helmet in a relatively short time. This helmet dryingmachine is divided into two parts namely: slicer/extortion machine and dryer. This slicer/squeezer machineserves to reduce the water content contained in the helmet up to 60-80%. In planning theoretically discussthe main components of the slicer transmission system on the helmet drying machine that determines: thediameter of pulley, the rotation ratio of the pulley, the shaft axis distance, the shaft diameter of the pulley II,and the bearing number. From the calculation results obtained as follows: 0.25 HP motor crusher power,electric motor rotation 1400 rpm, diameter pulley I 65 mm, diameter pulley II 130 mm, rotation ratio at 1:2pulleys, distance between the axis 251.32 mm axis, the diameter of the shaft on the pulley II 20 mm, and thenumber of open type 6004 bearings.Keywords: transmission system, pulleys and belts, shaft and bearing.</dc:description>
	<dc:publisher xml:lang="en-US">Teknik Mesin Universitas Halu Oleo</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2018-01-27</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/3629</dc:identifier>
	<dc:identifier>10.55679/enthalpy.v3i1.3629</dc:identifier>
	<dc:source xml:lang="en-US">Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin; Vol 3, No 1 (2018): Enthalpy: Jurnal Ilmiah Mahasiswa Teknik Mesin</dc:source>
	<dc:source>2502-8944</dc:source>
	<dc:source>10.55679/enthalpy.v3i1</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/3629/2760</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2018 ENTHALPY</dc:rights>
</oai_dc:dc>