Melola Discovery

← Melola Discovery

Jurnal

ANALISA LAJU KOROSI PADA BAJA KARBON RENDAH YANG DILAPISI SENG DENGAN METODE HOT DIP GALVANIZING

Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin · Vol. 1 No. 2 (2016)

DOI
10.55679/enthalpy.v1i2.1771
ISSN
2502-8944
Published
2016-12-27
Publisher
Teknik Mesin Universitas Halu Oleo
Language
eng

Abstract

ABSTRACTThis study aims to determine how the media influence of NaCl and H2SO4 / water against corrosion rate of low carbon steel coated with zinc by the method of Hot Dip Galvanizing. Research method is done by making a specimen of low carbon steel pipes circular, angled, and plate. Then the zinc coating process performed by the method of Hot Dip Galvanizing at a temperature of 500oC. Then do step corrosion testing with media H2SO4 and NaCl for 24 days and the data taken during the study. The results of the study that after a coating of zinc (Zn) on low carbon steel with Hot Dip Galvanizing method of specimen data obtained circle, the average rate of corrosion with H2SO4 media: Water is 5,529.10-7 gr/min. While in NaCl media, the average corrosion rate is 26,833.10-7 gr/min. An increase in the corrosion rate of 79.58%. On the specimen form elbow, the average rate of corrosion with H2SO4 media: Water only 2,0377.10-7 gr/min. In contrast, if using media NaCl, occur on average corrosion rate of 21,692.10-7 gr/min. Tests on specimens plat form, the average rate of corrosion in H2SO4 media: Water is 6,299.10-7 gr/min. Then the media NaCl average corrosion rate is 28,25.10-7 gr/min. The corrosion rate by using H2SO4 media: Water occurs in the form of the specimen plate is 6,299.10-7 gr/min, and 28,25.10-7 gr/min in NaCl media. Keyword: low carbon steel, zinc, galvanizing, corrosion, H2SO4, NaCl ABSTRAKPenelitian ini bertujuan untuk mengetahui bagaimana pengaruh media NaCl dan H2SO4/Air terhadap laju korosi pada baja karbon rendah yang dilapisi seng dengan metode Hot Dip Galvanizing. Metode peneliatian yang dilakukan dengan membuat spesimen dari pipa baja karbon rendah berbentuk lingkaran, siku, dan plat. Lalu dilakukan proses pelapisan seng dengan metode Hot Dip Galvanizing pada suhu 500oC. Lalu dilakukan langkah pengujian korosi dengan media H2SO4 dan NaCl selama 24 hari dan diambil data selama penelitian. Hasil penelitian bahwa setelah dilakukan pelapisan seng (Zn) pada baja karbon rendah dengan metode Hot Dip Galvanizing diperoleh data spesimen lingkaran, rata-rata laju korosi dengan media H2SO4:Air adalah 5,529.10-7 gr/menit. Sedangkan pada media NaCl, rata-rata laju korosinya adalah 26,833.10-7 gr/menit. Terjadi peningkatan laju korosi sebesar 79,58%. Pada bentuk spesimen siku, rata-rata laju korosi dengan media H2SO4:Air hanya 2,0377.10-7 gr/menit. Berbeda jika menggunakan media NaCl, terjadi rata-rata laju korosi sebesar 21,692.10-7 gr/menit. Pengujian pada bentuk spesimen plat, rata-rata laju korosi pada media H2SO4:Air adalah 6,299.10-7 gr/menit. Lalu pada media NaCl rata-rata laju korosinya adalah 28,25.10-7 gr/menit. Laju korosi terbesar dengan menggunakan media H2SO4:Air terjadi pada bentuk spesimen plat yaitu 6,299.10-7 gr/menit, dan 28,25.10-7 gr/menit pada media NaCl.Kata kunci: Baja karbon rendah, zinc, galvanizing, korosi, H2SO4, dan NaCl

Collaboration network of the authors

40 authors · 224 co-authorship links · 3 across different organisations · showing the 40 most connected

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Universitas Halu Oleo
  • Universitas Syiah Kuala
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Samhuddin SamhuddinAffiliation unknown11
Budiman SudiaAffiliation unknown10
Sudarsono SudarsonoAffiliation unknown9
Al Ichlas ImranAffiliation unknown9
Abd KadirUniversitas Halu Oleo9
Kadir KadirAffiliation unknown8
Prinob AksarUniversitas Halu Oleo8
La HasanudinUniversitas Halu Oleo7
Nanang EndriatnoAffiliation unknown6
Yuspian GunawanAffiliation unknown6
Agustinus LolokAffiliation unknown5
Ridway BalakaAffiliation unknown5
Jenny DellyAffiliation unknown4
La Ode Ahmad BarataAffiliation unknown3
Aditya RachmanAffiliation unknown3
Salimin SaliminAffiliation unknown3
Ardian SyahputraAffiliation unknown1
Ardian SyahputraUniversitas Syiah Kuala1
Usman UsmanUniversitas Syiah Kuala1
Erni MaidiyahUniversitas Syiah Kuala1
Emil SalimUniversitas Halu Oleo1
Muhammad Alfito RamadhanAffiliation unknown1
Melkysedekh S.P.Universitas Halu Oleo1
Janur RamadanUniversitas Halu Oleo1
Gafarudin La HidiUniversitas Halu Oleo1
Raden Rinova SisworoUniversitas Halu Oleo1
Aldiyanto AldiyantoAffiliation unknown1
Adib SatonoUniversitas Halu Oleo1
Kadek Edy SusantoUniversitas Halu Oleo1
Wandi HaryansaUniversitas Halu Oleo1
Rival Kahfi GamaUniversitas Halu Oleo1
La HasanuddinAffiliation unknown1
La Ode Amrul HasanAffiliation unknown1
Budiman SadiaAffiliation unknown1
Nanang EndriantoAffiliation unknown1
Sartirlan AliAffiliation unknown1
Laode SaefuddinAffiliation unknown1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://ojs.uho.ac.id/index.php/ENTHALPY/oai, first harvested 31 Okt 2026, last seen 1 Nov 2026.
Original metadata (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">ANALISA LAJU KOROSI PADA BAJA KARBON RENDAH YANG DILAPISI SENG DENGAN METODE HOT DIP GALVANIZING</dc:title>
	<dc:creator>Rahman, laode arif</dc:creator>
	<dc:creator>Hasbi, Muhammad</dc:creator>
	<dc:creator>Aminur, Aminur</dc:creator>
	<dc:description xml:lang="en-US">ABSTRACTThis study aims to determine how the media influence of NaCl and H2SO4 / water against corrosion rate of low carbon steel coated with zinc by the method of Hot Dip Galvanizing. Research method is done by making a specimen of low carbon steel pipes circular, angled, and plate. Then the zinc coating process performed by the method of Hot Dip Galvanizing at a temperature of 500oC. Then do step corrosion testing with media H2SO4 and NaCl for 24 days and the data taken during the study. The results of the study that after a coating of zinc (Zn) on low carbon steel with Hot Dip Galvanizing method of specimen data obtained circle, the average rate of corrosion with H2SO4 media: Water is 5,529.10-7 gr/min. While in NaCl media, the average corrosion rate is 26,833.10-7 gr/min. An increase in the corrosion rate of 79.58%. On the specimen form elbow, the average rate of corrosion with H2SO4 media: Water only 2,0377.10-7 gr/min. In contrast, if using media NaCl, occur on average corrosion rate of 21,692.10-7 gr/min. Tests on specimens plat form, the average rate of corrosion in H2SO4 media: Water is 6,299.10-7 gr/min. Then the media NaCl average corrosion rate is 28,25.10-7 gr/min. The corrosion rate by using H2SO4 media: Water occurs in the form of the specimen plate is 6,299.10-7 gr/min, and 28,25.10-7 gr/min in NaCl media. Keyword : low carbon steel, zinc, galvanizing, corrosion, H2SO4, NaCl ABSTRAKPenelitian ini bertujuan untuk mengetahui bagaimana pengaruh media NaCl dan H2SO4/Air  terhadap laju korosi pada baja karbon rendah yang dilapisi seng dengan metode Hot Dip Galvanizing. Metode peneliatian yang dilakukan dengan membuat spesimen dari pipa baja karbon rendah berbentuk lingkaran, siku, dan plat. Lalu dilakukan proses pelapisan seng dengan metode Hot Dip Galvanizing pada suhu 500oC. Lalu dilakukan langkah pengujian korosi dengan media H2SO4 dan NaCl selama 24 hari dan diambil data selama penelitian. Hasil penelitian bahwa setelah dilakukan pelapisan seng (Zn) pada baja karbon rendah dengan metode Hot Dip Galvanizing diperoleh data spesimen lingkaran, rata-rata laju korosi dengan media H2SO4:Air adalah 5,529.10-7 gr/menit. Sedangkan pada media NaCl, rata-rata laju korosinya adalah 26,833.10-7 gr/menit. Terjadi peningkatan laju korosi sebesar 79,58%. Pada bentuk spesimen siku, rata-rata laju korosi dengan media H2SO4:Air hanya 2,0377.10-7 gr/menit. Berbeda jika menggunakan media NaCl, terjadi rata-rata laju korosi sebesar 21,692.10-7 gr/menit. Pengujian pada bentuk spesimen plat, rata-rata laju korosi pada media H2SO4:Air adalah 6,299.10-7 gr/menit. Lalu pada media NaCl rata-rata laju korosinya adalah 28,25.10-7 gr/menit. Laju korosi terbesar dengan menggunakan media H2SO4:Air terjadi pada bentuk spesimen plat yaitu 6,299.10-7 gr/menit, dan 28,25.10-7 gr/menit pada media NaCl.Kata kunci :  Baja karbon rendah,  zinc, galvanizing, korosi, H2SO4, dan NaCl </dc:description>
	<dc:publisher xml:lang="en-US">Teknik Mesin Universitas Halu Oleo</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2016-12-27</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/1771</dc:identifier>
	<dc:identifier>10.55679/enthalpy.v1i2.1771</dc:identifier>
	<dc:source xml:lang="en-US">Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin; Vol 1, No 2 (2016): Enthalpy: Jurnal Ilmiah Mahasiswa Teknik Mesin</dc:source>
	<dc:source>2502-8944</dc:source>
	<dc:source>10.55679/enthalpy.v1i2</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/1771/1254</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2016 ENTHALPY</dc:rights>
</oai_dc:dc>