Melola Discovery

← Melola Discovery

Jurnal

Perancangan Mesin Perajang Singkong

Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin · Vol. 4 No. 1 (2019)

DOI
10.55679/enthalpy.v4i1.6092
ISSN
2502-8944
Published
2019-04-04
Publisher
Teknik Mesin Universitas Halu Oleo
Language
eng

Abstract

The purpose of the study was to determine the shaft design, knowing the pulleys and belts to be used and to determine the design of the blade of the cassava chopper machine. The procedure in the design of cassava chopper by using autocad is to prepare the tools and materials to be used; Power planning by calculating the total moment of inertia, calculating the acceleration of the motor, calculating the speed of the rotation angle; Axle planning by calculating the torque moment, calculating the allowable shear stress, calculating the shaft diameter and calculating the shear stress received; Belt and Puli planning is calculating the linear velocity of the belt and calculating the length of the belt and the planning of the Blade which is calculating the compressive strength, calculating the shear strength and calculating each blade style then drawing a cassava chopper. Based on the results of the analysis and discussion in this study it can be concluded that the driving motor power in cassava delivery is 0.698 kW, the shear stress that occurs on the shaft is 1.648 N/mm2, the required belt length is 1513.409 mm with distance axle axis 634.689 mm and compressive strength on the slicing knife are 1.206 N with shear stress 0.0038 N/mm2.Keywords: Twisting moment, shear stress, power, drive motor, shaft, pulley, belt.

Collaboration network of the authors

40 authors · 210 co-authorship links · 3 across different organisations · showing the 40 most connected

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Universitas Halu Oleo
  • Universitas Syiah Kuala
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Aminur AminurUniversitas Halu Oleo9
Samhuddin SamhuddinAffiliation unknown8
Kadir KadirAffiliation unknown8
Abd KadirUniversitas Halu Oleo8
Salimin SaliminAffiliation unknown7
Prinob AksarUniversitas Halu Oleo7
Budiman SudiaAffiliation unknown7
Sudarsono SudarsonoAffiliation unknown5
Nanang EndriatnoAffiliation unknown5
Sahabuddin HayUniversitas Halu Oleo4
Agustinus LolokAffiliation unknown4
Ridway BalakaAffiliation unknown4
Yuspian GunawanAffiliation unknown4
La HasanuddinAffiliation unknown3
La HasanudinUniversitas Halu Oleo3
Jenny DellyAffiliation unknown3
Aditya RachmanAffiliation unknown3
Samuel JieAffiliation unknown2
Lukas Kano MangallaUniversitas Halu Oleo2
Ardian SyahputraAffiliation unknown1
Ardian SyahputraUniversitas Syiah Kuala1
Usman UsmanUniversitas Syiah Kuala1
Erni MaidiyahUniversitas Syiah Kuala1
SITTI ROSYIDAHAffiliation unknown1
Muhammad Zakaria UmarAffiliation unknown1
Muhammad ArsyadUniversitas Halu Oleo1
Mazhfia UmarAffiliation unknown1
Rudi WijayaAffiliation unknown1
La Ode Amrul HasanAffiliation unknown1
La Ode Muhammad MunandriAffiliation unknown1
Jovi Jus DicaprioAffiliation unknown1
Sartirlan AliAffiliation unknown1
Baharudin BaharudinAffiliation unknown1
Laode SaefuddinAffiliation unknown1
Adnal AdnalAffiliation unknown1
Yuni Aryani KoedoesAffiliation unknown1
Sarjun SarjunAffiliation unknown1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://ojs.uho.ac.id/index.php/ENTHALPY/oai, first harvested 31 Okt 2026, last seen 1 Nov 2026.
Original metadata (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Perancangan Mesin Perajang Singkong</dc:title>
	<dc:creator>Mustamin, Mustamin</dc:creator>
	<dc:creator>Hasbi, Muhammad</dc:creator>
	<dc:creator>Imran, Al Ichlas</dc:creator>
	<dc:description xml:lang="en-US">The purpose of the study was to determine the shaft design, knowing the pulleys and belts to be used and to determine the design of the blade of the cassava chopper machine. The procedure in the design of cassava chopper by using autocad is to prepare the tools and materials to be used; Power planning by calculating the total moment of inertia, calculating the acceleration of the motor, calculating the speed of the rotation angle; Axle planning by calculating the torque moment, calculating the allowable shear stress, calculating the shaft diameter and calculating the shear stress received; Belt and Puli planning is calculating the linear velocity of the belt and calculating the length of the belt and the planning of the Blade which is calculating the compressive strength, calculating the shear strength and calculating each blade style then drawing a cassava chopper. Based on the results of the analysis and discussion in this study it can be concluded that the driving motor power in cassava delivery is 0.698 kW, the shear stress that occurs on the shaft is 1.648 N/mm2, the required belt length is 1513.409 mm with distance axle axis 634.689 mm and compressive strength on the slicing knife are 1.206 N with shear stress 0.0038 N/mm2.Keywords: Twisting moment, shear stress, power, drive motor, shaft, pulley, belt.</dc:description>
	<dc:publisher xml:lang="en-US">Teknik Mesin Universitas Halu Oleo</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2019-04-04</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/6092</dc:identifier>
	<dc:identifier>10.55679/enthalpy.v4i1.6092</dc:identifier>
	<dc:source xml:lang="en-US">Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin; Vol 4, No 1 (2019): Enthalpy-Jurnal Ilmiah Mahasiswa Teknik Mesin</dc:source>
	<dc:source>2502-8944</dc:source>
	<dc:source>10.55679/enthalpy.v4i1</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/6092/4472</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2019 ENTHALPY</dc:rights>
</oai_dc:dc>