Melola Discovery

← Melola Discovery

Jurnal

Pengaruh Sudut Elektroda Terhadap Sifat Mekanik dan Fisis Baja Karbon Rendah Hasil Proses Pengelasan SMAW

Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin · Vol. 7 No. 4 (2022) · pp. 158–163

DOI
10.55679/enthalpy.v7i4.28333
ISSN
2502-8944
Published
2022-12-23
Publisher
Teknik Mesin Universitas Halu Oleo
Language
eng

Abstract

Analysis of the effect of welding position and electrode movement pattern on hardness,it can be concluded that the electrode movement pattern has an influence on the hardness result. The purpose of this study was to determine the effect of the electrode angle on the mechanical and physical properties of low carbon steel from the SMAW welding process. The research method used is hardness testing and microstructure analysis. The results obtained are that specimens with different electrode angles, namely 300, 450, and 600 produce an average in each welding area such as the weld area, haz area, and different areas where the greater the angle the higher Also the average for each weld area and also on the analysis of microstructure shows that the weld metal area with electrode angles of 300, 450, and 600 shows the same microstructure or does not show any effect. the larger the area of the weld metal with electrode anglesof 300, 450, and 600, the larger the ferrite area, the larger the area of the weld metal with angles of 300, 450, and 600 pearlite grains.Keywords: electrode angle, low carbon steel, microstructure, welding

Collaboration network of the authors

40 authors · 192 co-authorship links · 5 across different organisations · showing the 40 most connected

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Universitas Halu Oleo
  • Universitas Syiah Kuala
  • National Research and Innovation Agency
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Yuspian GunawanAffiliation unknown11
Sudarsono SudarsonoAffiliation unknown11
Budiman SudiaAffiliation unknown10
Samhuddin SamhuddinAffiliation unknown9
Salimin SaliminAffiliation unknown9
Aminur AminurUniversitas Halu Oleo8
Muhammad HasbiUniversitas Syiah Kuala6
Ridway BalakaAffiliation unknown6
Al Ichlas ImranAffiliation unknown6
Abd KadirUniversitas Halu Oleo5
La HasanudinUniversitas Halu Oleo5
Jaka Seru Dwi SaputraAffiliation unknown3
La Ode Ahmad BarataAffiliation unknown3
Kadir KadirAffiliation unknown3
Edward NgiiUniversitas Halu Oleo2
Raden Rinova SisworoUniversitas Halu Oleo2
Robin RobinUniversitas Halu Oleo1
La HasanuddinAffiliation unknown1
Suriana Gende EdeUniversitas Halu Oleo1
Asmawati MunirUniversitas Halu Oleo1
Minarti UsmanAffiliation unknown1
R BalakaAffiliation unknown1
Raden Rinova SisworoAffiliation unknown1
Agustan AgustanUniversitas Halu Oleo1
Achmad Nur AliansyahAffiliation unknown1
Lukas Kano MangalaAffiliation unknown1
Lukas Kano MangallaUniversitas Halu Oleo1
Safarno SafarnoAffiliation unknown1
Rachmad SughiandiAffiliation unknown1
Bayu Hari AnggaraAffiliation unknown1
Andi YantoAffiliation unknown1
Andi Tri SetiawanAffiliation unknown1
Mufli MufliUniversitas Halu Oleo1
Muhammad IkhsanAffiliation unknown1
Fadel Alfahri FahriAffiliation unknown1
Darsono DarsonoNational Research and Innovation Agency1
Samidun SamidunAffiliation unknown1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://ojs.uho.ac.id/index.php/ENTHALPY/oai, first harvested 31 Okt 2026, last seen 1 Nov 2026.
Original metadata (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Pengaruh Sudut Elektroda Terhadap Sifat Mekanik dan Fisis Baja Karbon Rendah Hasil Proses Pengelasan SMAW</dc:title>
	<dc:creator>Darmawan, Darmawan</dc:creator>
	<dc:creator>Endriatno, Nanang</dc:creator>
	<dc:creator>Aksar, Prinob</dc:creator>
	<dc:description xml:lang="en-US">Analysis of the effect of welding position and electrode movement pattern on hardness,it can be concluded that the electrode movement pattern has an influence on the hardness result. The purpose of this study was to determine the effect of the electrode angle on the mechanical and physical properties of low carbon steel from the SMAW welding process. The research method used is hardness testing and microstructure analysis. The results obtained are that specimens with different electrode angles, namely 300, 450, and 600 produce an average in each welding area such as the weld area, haz area, and different areas where the greater the angle the higher Also the average for each weld area and also on the analysis of microstructure shows that the weld metal area with electrode angles of 300, 450, and 600 shows the same microstructure or does not show any effect. the larger the area of the weld metal with electrode anglesof 300, 450, and 600, the larger the ferrite area, the larger the area of the weld metal with angles of 300, 450, and 600 pearlite grains.Keywords: electrode angle, low carbon steel, microstructure, welding</dc:description>
	<dc:publisher xml:lang="en-US">Teknik Mesin Universitas Halu Oleo</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2022-12-23</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/28333</dc:identifier>
	<dc:identifier>10.55679/enthalpy.v7i4.28333</dc:identifier>
	<dc:source xml:lang="en-US">Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin; Vol 7, No 4 (2022): Enthalpy: Jurnal Ilmiah Mahasiswa Teknik Mesin; 158-163</dc:source>
	<dc:source>2502-8944</dc:source>
	<dc:source>10.55679/enthalpy.v7i4</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/28333/16833</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2022 Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin</dc:rights>
</oai_dc:dc>