Melola Discovery

← Melola Discovery

Open access Jurnal

ANALISA KEKUATAN MEKANIS SAMBUNGAN LAS KAMPUH V TUNGGAL DAN V GANDA PADA BAJA KARBON RENDAH DENGAN PROSES PENGELASAN SMAW

Dinamika : Jurnal Ilmiah Teknik Mesin · Vol. 12 No. 2 (2021) · pp. 103–108

DOI
10.33772/djitm.v12i2.19894
ISSN
2502-3373, 2085-8817
Published
2021-08-30
Publisher
Jurusan Teknik Mesin, Universitas Halu Oleo
Language
eng
License
creativecommons.org/licenses/by-sa/4.0

Abstract

Welding is one of the methods widely used in the joining of metals for structural elements. One of the factors that influence the strength of welded metals is types of welding joints. Suitability of the type of welding joint with geometries of base metals is required to obtain welded metal products with optimum properties. In this study an attempt is made to investigate mechanical properties of welded metals with two different types of joints (single-V and double-V) using the shielded metal arc welding (SMAW) process. Low carbon steel with bevel angle of 60° was used in this study. Welding process was performed using current of 70 A with a constant welding speed. The flexural properties and uniaxial tensile properties are studied by three-point bending test and uniaxial tensile test respectively. Test results show that the tensile strength and the bending strength of single-V specimens is 521.64 N/mm2 and 525.11 N/mm2 respectively. In addition, the tensile strength and the bending strength of double-V specimens is 517.33 N/mm2 and 504.24 N/mm2 respectively

Collaboration network of the authors

40 authors · 208 co-authorship links · 8 across different organisations · showing the 40 most connected

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Universitas Halu Oleo
  • Bandung Institute of Technology
  • Universitas Komputer Indonesia
  • Universitas Syiah Kuala
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Samhuddin SamhuddinAffiliation unknown20
Budiman SudiaAffiliation unknown19
Nanang EndriatnoAffiliation unknown14
Yuspian GunawanAffiliation unknown13
Al Ichlas ImranAffiliation unknown13
Abd KadirUniversitas Halu Oleo13
La HasanudinUniversitas Halu Oleo12
Salimin SaliminAffiliation unknown8
Ridway BalakaAffiliation unknown8
Muhammad HasbiUniversitas Syiah Kuala8
Kadir KadirAffiliation unknown7
Agustinus LolokAffiliation unknown6
La Ode Ahmad BarataAffiliation unknown6
Jaka Seru Dwi SaputraAffiliation unknown5
Edward NgiiUniversitas Halu Oleo3
Emil SalimUniversitas Halu Oleo2
Muhammad Alfito RamadhanAffiliation unknown2
Raden Rinova SisworoUniversitas Halu Oleo2
La HasanuddinAffiliation unknown2
Luther PagilingAffiliation unknown2
Jenny DellyAffiliation unknown2
Sarwono SutiknoBandung Institute of Technology1
Arif SasongkoBandung Institute of Technology1
Yusuf KurniawanBandung Institute of Technology1
Melkysedekh S.P.Universitas Halu Oleo1
Janur RamadanUniversitas Halu Oleo1
Gafarudin La HidiUniversitas Halu Oleo1
Robin RobinUniversitas Halu Oleo1
Aldiyanto AldiyantoAffiliation unknown1
Adib SatonoUniversitas Halu Oleo1
Kadek Edy SusantoUniversitas Halu Oleo1
Wandi HaryansaUniversitas Halu Oleo1
Rival Kahfi GamaUniversitas Halu Oleo1
Ahmad FatsanAffiliation unknown1
Diny DinartiAffiliation unknown1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://ojs.uho.ac.id/index.php/dinamika/oai, first harvested 31 Okt 2026, last seen 31 Okt 2026.
Original metadata (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">ANALISA KEKUATAN MEKANIS SAMBUNGAN LAS KAMPUH V TUNGGAL DAN V GANDA PADA BAJA KARBON RENDAH DENGAN PROSES PENGELASAN SMAW</dc:title>
	<dc:creator>Sudarsono, Sudarsono</dc:creator>
	<dc:creator>Hidayat, Hidayat</dc:creator>
	<dc:creator>Aminur, Aminur</dc:creator>
	<dc:creator>Pranoto, Sarwo</dc:creator>
	<dc:creator>Aksar, Prinob</dc:creator>
	<dc:description xml:lang="en-US">Welding is one of the methods widely used in the joining of metals for structural elements. One of the factors that influence the strength of welded metals is types of welding joints. Suitability of the type of welding joint with geometries of base metals is required to obtain welded metal products with optimum properties. In this study an attempt is made to investigate mechanical properties of welded metals with two different types of joints (single-V and double-V) using the shielded metal arc welding (SMAW) process. Low carbon steel with bevel angle of 60° was used in this study. Welding process was performed using current of 70 A with a constant welding speed. The flexural properties and uniaxial tensile properties are studied by three-point bending test and uniaxial tensile test respectively. Test results show that the tensile strength and the bending strength of single-V specimens is 521.64 N/mm2 and 525.11 N/mm2 respectively. In addition, the tensile strength and the bending strength of double-V specimens is 517.33 N/mm2 and  504.24 N/mm2 respectively</dc:description>
	<dc:publisher xml:lang="en-US">Jurusan Teknik Mesin, Universitas Halu Oleo</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2021-08-30</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs.uho.ac.id/index.php/dinamika/article/view/19894</dc:identifier>
	<dc:identifier>10.33772/djitm.v12i2.19894</dc:identifier>
	<dc:source xml:lang="en-US">Dinamika : Jurnal Ilmiah Teknik Mesin; Vol 12, No 2 (2021); 103-108</dc:source>
	<dc:source>2502-3373</dc:source>
	<dc:source>2085-8817</dc:source>
	<dc:source>10.33772/djitm.v12i2</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs.uho.ac.id/index.php/dinamika/article/view/19894/12755</dc:relation>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>