Melola Discovery

← Melola Discovery

Akses terbuka Jurnal Tanpa peringkat SINTA

DESIGN OF SHAFT, PULL AND V-BELT ON THE REAR WHEEL OF YAMAHA XEON GT 125CC MOTORCYCLE 2014

Dinamika : Jurnal Ilmiah Teknik Mesin · Vol. 15 No. 1 (2024) · hlm. 98–105

DOI
10.33772/djitm.v15i1.42531
ISSN
2502-3373, 2085-8817
Terbit
2024-01-26
Penerbit
Jurusan Teknik Mesin, Universitas Halu Oleo
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

Transportation is now a necessity for every human being. Therefore developments in the automotive sector, especially transportation, are increasing rapidly. Motorcycles are a combination of components whose number can reach more than a thousand parts. Motorcycles can run perfectly if all the components are in good condition. The components that are important on a motorcycle include wheels, tires and chains. For this reason, there are many things that must be considered by a designer in designing a motorcycle component, including adjusting a component according to its actual function, the safety factor of the planned component., efficiency and cost factors. This study aims to identify and apply theoretical studies and compare the results of calculations with data from specifications in the form of designs, especially for transmission shafts, pulleys and v-belts on motorcycles. Based on the calculation results, it was found that the shaft diameter was 16.4 mm, the pulley diameter was 116.42 mm and the v-belt speed was 10.97 m/s and the v-belt length was 1073.32 mm. Keyword: Motorcycle, Design, Shaft, Pulley, V-belt

Jaringan kolaborasi para penulis

Belum ada rekan penulis di Melola.

Sumber metadata: OAI-PMH (metadata jurnal) https://ojs.uho.ac.id/index.php/dinamika/oai, pertama di-harvest 31 Okt 2026, terakhir terlihat 15 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">DESIGN OF SHAFT, PULL AND V-BELT ON THE REAR WHEEL OF YAMAHA XEON GT 125CC MOTORCYCLE 2014</dc:title>
	<dc:creator>Abdul Barr, Putranda Yedi</dc:creator>
	<dc:description xml:lang="en-US">Transportation is now a necessity for every human being. Therefore developments in the automotive sector, especially transportation, are increasing rapidly. Motorcycles are a combination of components whose number can reach more than a thousand parts. Motorcycles can run perfectly if all the components are in good condition. The components that are important on a motorcycle include wheels, tires and chains. For this reason, there are many things that must be considered by a designer in designing a motorcycle component, including adjusting a component according to its actual function, the safety factor of the planned component. , efficiency and cost factors. This study aims to identify and apply theoretical studies and compare the results of calculations with data from specifications in the form of designs, especially for transmission shafts, pulleys and v-belts on motorcycles. Based on the calculation results, it was found that the shaft diameter was 16.4 mm, the pulley diameter was 116.42 mm and the v-belt speed was 10.97 m/s and the v-belt length was 1073.32 mm. 
 
Keyword : Motorcycle, Design, Shaft, Pulley, V-belt</dc:description>
	<dc:publisher xml:lang="en-US">Jurusan Teknik Mesin, Universitas Halu Oleo</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2024-01-26</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs.uho.ac.id/index.php/dinamika/article/view/42531</dc:identifier>
	<dc:identifier>10.33772/djitm.v15i1.42531</dc:identifier>
	<dc:source xml:lang="en-US">Dinamika : Jurnal Ilmiah Teknik Mesin; Vol 15, No 1 (2023): Dinamika Jurnal Teknik Mesin; 98-105</dc:source>
	<dc:source>2502-3373</dc:source>
	<dc:source>2085-8817</dc:source>
	<dc:source>10.33772/djitm.v15i1</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs.uho.ac.id/index.php/dinamika/article/view/42531/19702</dc:relation>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>