Melola Discovery

← Melola Discovery

Akses terbuka Jurnal Tanpa peringkat SINTA

Analisis Pergantian Alat Pengencang Baut-U 4 Spindel Menjadi 1 Spindel di Station Rear axle PT.Daimler Commercial Vehicles Manufacturing Indonesia

Dinamika : Jurnal Ilmiah Teknik Mesin · Vol. 13 No. 2 (2022) · hlm. 104–110

DOI
10.33772/djitm.v13i2.23209
ISSN
2502-3373, 2085-8817
Terbit
2022-12-01
Penerbit
Jurusan Teknik Mesin, Universitas Halu Oleo
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

Bolt tightening is a process that is widely and important to use or do in the vehicle assembly process.. Power tools with synchronous systems are powerful equipment that is able to help the process of tightening several bolts simultaneously without human energy. This study aims to analyze the 1 spindle bolt fastener to fasten 4 U-bolts on Rear axle in Axor 4028TT type trucks at PT. Daimler Commercial Vehicles Manufacturing Indonesia.The experiment was conducted to test the fastening of the bolt 1 spindle with a replica method of the 4 spindle bolt fastening synchronization system. Sampling used is 6 units with each unit has 4 bolts on the right and left to be compared with the results of U-bolt tightening using the tool 4 spindles.The study used a digital moment key to measure the residual firmness value of the bolt. The data analysis technique is to compare the value of the bolt tightening deviation across two tool systems. The average deviation value on the 1 spindle bolt fastener is 0.31% while on 4 spindles it is 0.13%. The average value of deviations from the digital moment key verification results on 1 spindle is 2.4% while 4 spindles are 3.4%. The results of the comparison showed that the results of fastening bolts 1 spindle provide a deviation of no more than ± 18.6%. Despite having a deviation value greater than 4 spindles, but considering the capacity of units produced in the pandemic period and cost components if tool repairs are made, then the 1 spindle bolt tightening tool is worth considering for use..

Jaringan kolaborasi para penulis

Belum ada rekan penulis di Melola.

Sumber metadata: OAI-PMH (metadata jurnal) https://ojs.uho.ac.id/index.php/dinamika/oai, pertama di-harvest 31 Okt 2026, terakhir terlihat 15 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Analisis Pergantian Alat Pengencang Baut-U 4 Spindel Menjadi 1 Spindel di Station Rear axle PT.Daimler Commercial Vehicles Manufacturing Indonesia</dc:title>
	<dc:creator>Agape, Natanael Charisma</dc:creator>
	<dc:description xml:lang="en-US">Bolt tightening is a process that is widely and important to use or do in the vehicle assembly process.. Power tools with synchronous systems are powerful equipment that is able to help the process of tightening several bolts simultaneously without human energy. This study aims to analyze the 1 spindle bolt fastener to fasten 4 U-bolts on Rear axle in Axor 4028TT type trucks at PT. Daimler Commercial Vehicles Manufacturing Indonesia.The experiment was conducted to test the fastening of the bolt 1 spindle with a replica method of the 4 spindle bolt fastening synchronization system. Sampling used is 6 units with each unit has 4 bolts on the right and left to be compared with the results of U-bolt tightening using the tool 4 spindles.The study used a digital moment key to measure the residual firmness value of the bolt. The data analysis technique is to compare the value of the bolt tightening deviation across two tool systems. The average deviation value on the 1 spindle bolt fastener is 0.31% while on 4 spindles it is 0.13%. The average value of deviations from the digital moment key verification results on 1 spindle is 2.4% while 4 spindles are 3.4%. The results of the comparison showed that the results of fastening bolts 1 spindle provide a deviation of no more than ± 18.6%. Despite having a deviation value greater than 4 spindles, but considering the capacity of units produced in the pandemic period and cost components if tool repairs are made, then the 1 spindle bolt tightening tool is worth considering for use..</dc:description>
	<dc:publisher xml:lang="en-US">Jurusan Teknik Mesin, Universitas Halu Oleo</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2022-12-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs.uho.ac.id/index.php/dinamika/article/view/23209</dc:identifier>
	<dc:identifier>10.33772/djitm.v13i2.23209</dc:identifier>
	<dc:source xml:lang="en-US">Dinamika : Jurnal Ilmiah Teknik Mesin; Vol 13, No 2 (2022): Jurnal Dinamika Teknik Mesin; 104-110</dc:source>
	<dc:source>2502-3373</dc:source>
	<dc:source>2085-8817</dc:source>
	<dc:source>10.33772/djitm.v13i2</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs.uho.ac.id/index.php/dinamika/article/view/23209/16839</dc:relation>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>