Melola Discovery

← Melola Discovery

Jurnal

ANALISA MATERIAL CRYSTALINE SILICON WAFER SOLAR CELL DENGAN MENGGUNAKAN TYPE DRY MACHINES

Dinamika : Jurnal Ilmiah Teknik Mesin · Vol. 10 No. 2 (2019) · pp. 21–27

DOI
10.33772/djitm.v10i2.6933
ISSN
2502-3373, 2085-8817
Published
2019-05-22
Publisher
Jurusan Teknik Mesin, Universitas Halu Oleo
Language
eng

Abstract

The Photovoltaic (PV) industry is one of the renewable energy segments, and electricity generation from photovoltaics (solar cells) is considered one of the key technologies of the century in the future. Photovoltaic solar electricity presents an elegant way to generate electricity, because there are no movements that damage the environment, namely: zero emissions, and no noise. This study aims to determine the efficiency analysis of making Crystaline Silicon by using type dry machines. The method that is carried out is the manufacture of Crystanesilicon by using type Dry machines. Produce nano wire devices that provide efficiency above 5%, with short photocurrent circuits higher than planar control samples. Thickness The thickness of the Si wafer depends on its diameter for reasons of mechanical stability during production and further processing, and about 279 μm (for wafers in diameter 2 inches), 379.5 μm (3 inches), 524.5 μm (4 inches), 674.5 μm (6 inches) and 724.5 μm (8 inches).

Keywords

Collaboration network of the authors

40 authors · 207 co-authorship links · 3 across different organisations · showing the 40 most connected

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Universitas Halu Oleo
  • Universitas Syiah Kuala
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Abd KadirUniversitas Halu Oleo15
Samhuddin SamhuddinAffiliation unknown14
Al Ichlas ImranAffiliation unknown14
Budiman SudiaAffiliation unknown13
Kadir KadirAffiliation unknown13
Ridway BalakaAffiliation unknown12
Prinob AksarUniversitas Halu Oleo9
Yuspian GunawanAffiliation unknown9
Sudarsono SudarsonoAffiliation unknown8
Salimin SaliminAffiliation unknown7
Nanang EndriatnoAffiliation unknown5
La Ode Ahmad BarataAffiliation unknown4
Lukas Kano MangallaUniversitas Halu Oleo4
Indrayati GaluguAffiliation unknown3
Luther PagilingAffiliation unknown2
Tachrir TachrirAffiliation unknown2
Muhammad HasbiUniversitas Syiah Kuala2
Aldiyanto AldiyantoAffiliation unknown2
Adib SatonoUniversitas Halu Oleo2
Kadek Edy SusantoUniversitas Halu Oleo2
Wandi HaryansaUniversitas Halu Oleo2
Rival Kahfi GamaUniversitas Halu Oleo2
Jaka Seru Dwi SaputraAffiliation unknown2
Emil SalimUniversitas Halu Oleo1
Muhammad Alfito RamadhanAffiliation unknown1
Melkysedekh S.P.Universitas Halu Oleo1
Janur RamadanUniversitas Halu Oleo1
Gafarudin La HidiUniversitas Halu Oleo1
Raden Rinova SisworoUniversitas Halu Oleo1
Mirna PratiwiwahyuniAffiliation unknown1
Laode SafiuddinAffiliation unknown1
La Ode Muh. MagribiAffiliation unknown1
Mustarum MusarudinAffiliation unknown1
Sahabuddin HayUniversitas Halu Oleo1
Sahrul HusuAffiliation unknown1
Yuni Aryanu KoedoesAffiliation unknown1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://ojs.uho.ac.id/index.php/dinamika/oai, first harvested 31 Okt 2026, last seen 31 Okt 2026.
Original metadata (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">ANALISA MATERIAL CRYSTALINE SILICON WAFER SOLAR CELL DENGAN MENGGUNAKAN TYPE DRY MACHINES</dc:title>
	<dc:creator>Hasanudin, La</dc:creator>
	<dc:creator>Ichlas Imran, Al</dc:creator>
	<dc:creator>Lolok, Agustinus</dc:creator>
	<dc:creator>Aminur, Aminur</dc:creator>
	<dc:subject xml:lang="en-US"></dc:subject>
	<dc:subject xml:lang="en-US">Crystalline, Photovoltaic, Machines, Efficiency, Manufacture</dc:subject>
	<dc:description xml:lang="en-US">The Photovoltaic (PV) industry is one of the renewable energy segments, and electricity generation from photovoltaics (solar cells) is considered one of the key technologies of the century in the future. Photovoltaic solar electricity presents an elegant way to generate electricity, because there are no movements that damage the environment, namely: zero emissions, and no noise. This study aims to determine the efficiency analysis of making Crystaline Silicon by using type dry machines. The method that is carried out is the manufacture of Crystanesilicon by using type Dry machines. Produce nano wire devices that provide efficiency above 5%, with short photocurrent circuits higher than planar control samples. Thickness The thickness of the Si wafer depends on its diameter for reasons of mechanical stability during production and further processing, and about 279 μm (for wafers in diameter 2 inches), 379.5 μm (3 inches), 524.5 μm (4 inches), 674.5 μm (6 inches) and 724.5 μm (8 inches).</dc:description>
	<dc:publisher xml:lang="en-US">Jurusan Teknik Mesin, Universitas Halu Oleo</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2019-05-22</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs.uho.ac.id/index.php/dinamika/article/view/6933</dc:identifier>
	<dc:identifier>10.33772/djitm.v10i2.6933</dc:identifier>
	<dc:source xml:lang="en-US">Dinamika : Jurnal Ilmiah Teknik Mesin; Vol 10, No 2 (2019); 21-27</dc:source>
	<dc:source>2502-3373</dc:source>
	<dc:source>2085-8817</dc:source>
	<dc:source>10.33772/djitm.v10i2</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs.uho.ac.id/index.php/dinamika/article/view/6933/5107</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2019 DINAMIKA: Jurnal Ilmiah Teknik Mesin</dc:rights>
</oai_dc:dc>