Melola Discovery

← Melola Discovery

Jurnal Tanpa peringkat SINTA

PENGENDALIAN KUALITAS PRODUKSI TEH TB 4 ASLI RCLT MENGGUNAKAN METODE SEVEN TOOLS PADA PT. XYZ

Jurnal Manajemen, Bisnis dan Organisasi (JUMBO) · Vol. 4 No. 1 (2020) · hlm. 01–18

DOI
10.33772/jumbo.v4i1.12099
ISSN
2502-4175
Terbit
2020-05-12
Penerbit
Pascasarjana Universitas Halu Oleo
Bahasa
eng

Abstrak

PT. XYZ often experiences production constraints because of the tea TB 4 Asli RCLT's type of defective product during the production process. The purpose of this study is to find out the factors that cause the occurrence of defective products and provide recommendations that can be made to reduce the level of defective products. This study uses the Seven Tools method which consists of flow charts, check sheets, histograms, pareto diagrams, scatter diagrams, fish bone diagrams (cause-and-effect diagrams), and statistical process control (control charts). The results showed that there were 2 types of the biggest defects are Bag Overlap with a damage percentage of 26.15% and Tea in Seal 22.56%. These defects are caused by several major factors which are machines and men. The results of the study also show that the company's production process is still not well controlled. So, it is expected that PT. XYZ considers recommendations by giving more attention to the quality of the people who work and conducting in-depth analysis of other factors that can cause engine damage so that the company can reduce the level of defective products during the production process.

Kata kunci

Jaringan kolaborasi para penulis

5 penulis · 6 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Binus University
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Nexia TanadjayaBinus University1
Christine ChendrawatyBinus University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://ojs.uho.ac.id/index.php/JUMBO/oai, pertama di-harvest 31 Okt 2026, terakhir terlihat 15 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">PENGENDALIAN KUALITAS PRODUKSI TEH TB 4 ASLI RCLT MENGGUNAKAN METODE SEVEN TOOLS PADA PT. XYZ</dc:title>
	<dc:creator>Prihandoko, Danang</dc:creator>
	<dc:creator>Fania, Esta</dc:creator>
	<dc:creator>Julita, Jihan Nurul</dc:creator>
	<dc:subject xml:lang="en-US">Quality; Defective products; Seven Tools</dc:subject>
	<dc:description xml:lang="en-US">PT. XYZ often experiences production constraints because of the tea TB 4 Asli RCLT's type of defective product during the production process. The purpose of this study is to find out the factors that cause the occurrence of defective products and provide recommendations that can be made to reduce the level of defective products. This study uses the Seven Tools method which consists of flow charts, check sheets, histograms, pareto diagrams, scatter diagrams, fish bone diagrams (cause-and-effect diagrams), and statistical process control (control charts). The results showed that there were 2 types of the biggest defects are Bag Overlap with a damage percentage of 26.15% and Tea in Seal 22.56%. These defects are caused by several major factors which are machines and men. The results of the study also show that the company's production process is still not well controlled. So, it is expected that PT. XYZ considers recommendations by giving more attention to the quality of the people who work and conducting in-depth analysis of other factors that can cause engine damage so that the company can reduce the level of defective products during the production process.</dc:description>
	<dc:publisher xml:lang="en-US">Pascasarjana Universitas Halu Oleo</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2020-05-12</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs.uho.ac.id/index.php/JUMBO/article/view/12099</dc:identifier>
	<dc:identifier>10.33772/jumbo.v4i1.12099</dc:identifier>
	<dc:source xml:lang="en-US">Jurnal Manajemen, Bisnis dan Organisasi (JUMBO); Vol 4, No 1 (2020): Jurnal Jumbo Vol 4 No 1; 01-18</dc:source>
	<dc:source>2502-4175</dc:source>
	<dc:source>10.33772/jumbo.v4i1</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs.uho.ac.id/index.php/JUMBO/article/view/12099/pdf</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2020 Jurnal Manajemen, Bisnis dan Organisasi (JUMBO)</dc:rights>
</oai_dc:dc>