Melola Discovery

← Melola Discovery

Jurnal Tanpa peringkat SINTA

PENERAPAN SISTEM HACCP MELALUI IDENTIFIKASI BAHAYA DAN PENENTUAN TITIK KENDALI KRITIS PRODUK TUTUG ONCOM INSTAN DI UMKM TASIKMALAYA (Implementation of HACCP System Through Hazard Identification and Determination of Critical Control Points of Instant Tutug Oncom Product at UMKM Tasikmalaya)

Jurnal Sains dan Teknologi Pangan · Vol. 8 No. 4 (2023)

DOI
10.33772/jstp.v8i4.42969
ISSN
2527-6271
Terbit
2023-08-23
Penerbit
JURUSAN ILMU DAN TEKNOLOGI PANGAN, UNIVERSITAS HALU OLEO
Bahasa
eng

Abstrak

Tutug oncom merupakan pangan olahan khas Tasikmalaya yang terbuat dari oncom dan dicampur dengan berbagai rempah-rempah. Namun, berdasarkan survey di pasaran ditemukan beberapa produk tutug oncom instan yang belum memenuhi standar keamanan pangan, seperti belum tersertifikasi P-IRT atau BPOM, dan tidak terdapat tanggal kadaluwarsa serta fasilitas produksi yang dinilai belum menerapkan standar keamanan pangan. Tujuan penelitian ini adalah untuk mengidentifikasi bahaya dan menentukan titik kendali kritis selama proses produksi tutug oncom instan. Penelitian dilakukan dengan 3 tahap, meliputi identifikasi, pengumpulan dan pengolahan data yang dihasilkan melalui pendekatan wawancara, observasi, serta analisis terhadap data yang dihasilkan. Berdasarkan hasil pengamatan di lapangan, ditemukan beberapa penyimpangan terhadap aspek SSOP dan GMP, yaitu pencegahan kontaminasi silang, higiene karyawan, program sanitasi ruangan dan peralatan produksi, serta fasilitas produksi (bangunan). Analisis identifikasi bahaya menunjukkan terdapat potensi bahaya fisik, kimia, dan biologi selama proses produksi. Potensi bahaya fisik dimungkinkan berasal dari rambut karyawan, debu, dan serangga, sedangkan potensi bahaya kimia berasal dari residu pestisida dan aflatoksin. Potensi bahaya biologis dapat berasal dari karyawan serta mikroba patogen yang tersebar di udara. Titik kendali kritis (CCP) terdapat pada tahap penerimaan bahan baku dan tambahan, yakni berupa residu pestisida dari rempah-rempah dan aflatoksin dari oncom. Kata kunci: CCP, GMP, Identifikasi bahaya, SSOP, Tutug oncom Tutug oncom is a Tasikmalaya processed food made from oncom and mixed with various spices. However, based on market surveys, it was found several instant tutug oncom products did not satisfy with food safety standards, such as not being P-IRT or BPOM certified, and had no expiry date and production facilities that were considered not to have implemented food safety standards. This study aimed to identify hazards and determine critical control points during the instant tutug oncom production process. The research was carried out in 3 stages, including identification, collection and processing of the resulting data through interview, observation and analysis of the resulting data. Based on the results of observation in the field, several deviations were found from the SSOP and GMP aspects, namely cross-contamination prevention, employee hygiene, room and production equipment sanitation program, and production facilities (building). Hazard identification analysis shows that there are potential physical, chemical and biological hazards during the production process. Physical potential hazards may come from employee hair, dust and insects, while chemical hazards may come from pesticide residues and aflatoxins. Potential biological hazards originated from employees and pathogenic microbes that are spread in the air. Critical control points (CCP) are found at the stage of receiving raw and additional materials, namely in the form of pesticide residues originating from spices and aflatoxin from oncom. Keywords: CCP, GMP, Hazard identification, SSOP, Tutug oncom

Jaringan kolaborasi para penulis

3 penulis · 3 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://ojs.uho.ac.id/index.php/jstp/oai, pertama di-harvest 31 Okt 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">PENERAPAN SISTEM HACCP MELALUI IDENTIFIKASI BAHAYA DAN PENENTUAN TITIK KENDALI KRITIS PRODUK TUTUG ONCOM INSTAN DI UMKM TASIKMALAYA (Implementation of HACCP System Through Hazard Identification and Determination of Critical Control Points of Instant Tutug Oncom Product at UMKM Tasikmalaya)</dc:title>
	<dc:creator>Maerani, Maerani</dc:creator>
	<dc:creator>Aprianti, Gustira Endah</dc:creator>
	<dc:creator>Harningsih, Rini</dc:creator>
	<dc:description xml:lang="en-US">Tutug oncom merupakan pangan olahan khas Tasikmalaya yang terbuat dari oncom dan dicampur dengan berbagai rempah-rempah. Namun, berdasarkan survey di pasaran ditemukan beberapa produk tutug oncom instan yang belum memenuhi standar keamanan pangan, seperti belum tersertifikasi P-IRT atau BPOM, dan tidak terdapat tanggal kadaluwarsa serta fasilitas produksi yang dinilai belum menerapkan standar keamanan pangan. Tujuan penelitian ini adalah untuk mengidentifikasi bahaya dan menentukan titik kendali kritis selama proses produksi tutug oncom instan. Penelitian dilakukan dengan 3 tahap, meliputi identifikasi, pengumpulan dan pengolahan data yang dihasilkan melalui pendekatan wawancara, observasi, serta analisis terhadap data yang dihasilkan. Berdasarkan hasil pengamatan di lapangan, ditemukan beberapa penyimpangan terhadap aspek SSOP dan GMP, yaitu pencegahan kontaminasi silang, higiene karyawan, program sanitasi ruangan dan peralatan produksi, serta fasilitas produksi (bangunan). Analisis identifikasi bahaya menunjukkan terdapat potensi bahaya fisik, kimia, dan biologi selama proses produksi. Potensi bahaya fisik dimungkinkan berasal dari rambut karyawan, debu, dan serangga, sedangkan potensi bahaya kimia berasal dari residu pestisida dan aflatoksin. Potensi bahaya biologis dapat berasal dari karyawan serta mikroba patogen yang tersebar di udara. Titik kendali kritis (CCP) terdapat pada tahap penerimaan bahan baku dan tambahan, yakni berupa residu pestisida dari rempah-rempah dan aflatoksin dari oncom. 

Kata kunci: CCP, GMP, Identifikasi bahaya, SSOP, Tutug oncom

Tutug oncom is a Tasikmalaya processed food made from oncom and mixed with various spices. However, based on market surveys, it was found several instant tutug oncom products did not satisfy with food safety standards, such as not being P-IRT or BPOM certified, and had no expiry date and production facilities that were considered not to have implemented food safety standards. This study aimed to identify hazards and determine critical control points during the instant tutug oncom production process. The research was carried out in 3 stages, including identification, collection and processing of the resulting data through interview, observation and analysis of the resulting data. Based on the results of observation in the field, several deviations were found from the SSOP and GMP aspects, namely cross-contamination prevention, employee hygiene, room and production equipment sanitation program, and production facilities (building). Hazard identification analysis shows that there are potential physical, chemical and biological hazards during the production process. Physical potential hazards may come from employee hair, dust and insects, while chemical hazards may come from pesticide residues and aflatoxins. Potential biological hazards originated from employees and pathogenic microbes that are spread in the air. Critical control points (CCP) are found at the stage of receiving raw and additional materials, namely in the form of pesticide residues originating from spices and aflatoxin from oncom.

Keywords: CCP, GMP, Hazard identification, SSOP, Tutug oncom</dc:description>
	<dc:publisher xml:lang="en-US">JURUSAN ILMU DAN TEKNOLOGI PANGAN, UNIVERSITAS HALU OLEO</dc:publisher>
	<dc:contributor xml:lang="en-US">LPPM, Bakti Tunas Husadad University</dc:contributor>
	<dc:date>2023-08-23</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs.uho.ac.id/index.php/jstp/article/view/42969</dc:identifier>
	<dc:identifier>10.33772/jstp.v8i4.42969</dc:identifier>
	<dc:source xml:lang="en-US">Jurnal Sains dan Teknologi Pangan; Vol 8, No 4 (2023): Jurnal Sains dan Teknologi Pangan</dc:source>
	<dc:source>2527-6271</dc:source>
	<dc:source>10.33772/jstp.v8i4</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs.uho.ac.id/index.php/jstp/article/view/42969/18980</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2023 Jurnal Sains dan Teknologi Pangan</dc:rights>
</oai_dc:dc>