Melola Discovery

← Melola Discovery

Jurnal

Analisa Getaran Pada Balok Jepit Bebas dan Jepit-Jepit dengan Variasi Posisi Motor Penggetar

Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin · Vol. 6 No. 2 (2022) · hlm. 32–37

DOI
10.55679/enthalpy.v6i2.19131
ISSN
2502-8944
Terbit
2022-03-14
Penerbit
Teknik Mesin Universitas Halu Oleo
Bahasa
eng

Abstrak

This study aims to determine the difference in vibration produced when the position of the vibration source is placed in a different position on the cantilever beam which is supported by fixed-fixed and free-fixed supports. This research used 6061 series aluminum beam with a size of 32 mm x 32 mm x 600 mm. Variations the placement of the exciter of fixed-fixed beams was in the 15 cm, 30 cm, and 45 cm positions, while the fixed-free beams was in the 10 cm, 20 cm, 30 cm, 40 cm, and 50 cm positions. The results of the research on fixed-fixed beams showed that the maximum displacement value was at a position of 30 cm with a value of 0.097 mm, the minimum displacement at 45 cm with a value of 0.04 mm. The maximum velocity value was at a position of 15 cm with a value of 0.653 cm/s, the minimum velocity was at a position of 45 cm with a value of 0.397 cm/s. The maximum acceleration value was at a position of 15 cm with a value of 12.16 m/s², the minimum acceleration was at a position of 45 cm with a value of 8.33 m/s². While the fixed-free beam showed that the maximum displacement value was at a position of 50 cm with a value of 0.197 mm, the minimum displacement at a position of 10 cm with a value of 0.097 mm. The maximum velocity value was at a position of 30 cm with a value of 1.138 cm/s, the minimum velocity at a position of 10 cm with a value of 0.670 cm/s. The maximum acceleration value was at a position of 30 cm with a value of 21,833 m/s², the minimum acceleration was at a position of 10 cm with a value of 9.95 m/s².Keywords: vibration, displacement, velocity, acceleration, aluminum

Jaringan kolaborasi para penulis

40 penulis · 131 tautan kepenulisan bersama · 9 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Halu Oleo
  • State University of Semarang
  • IPB University
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Prinob AksarUniversitas Halu Oleo11
Aminur AminurUniversitas Halu Oleo10
Al Ichlas ImranUniversitas Halu Oleo9
Samhuddin SamhuddinUniversitas Halu Oleo8
Sudarsono SudarsonoUniversitas Halu Oleo6
Ridway BalakaUniversitas Halu Oleo6
La HasanudinUniversitas Halu Oleo5
Yuspian GunawanUniversitas Halu Oleo5
Salimin SaliminUniversitas Halu Oleo5
La Ode Ahmad BarataUniversitas Halu Oleo4
Sudarsono SudarsonoIPB University4
Abd. Rahman KadirUniversitas Halu Oleo2
Aminur AminurUniversitas Halu Oleo2
Raden Rinova SisworoUniversitas Halu Oleo2
Muhammad Yunan HasbiUniversitas Halu Oleo2
Andi YantoUniversitas Halu Oleo1
Muhammad IkhsanUniversitas Halu Oleo1
Samidun SamidunUniversitas Halu Oleo1
Irwan IrwanUniversitas Halu Oleo1
Muh. Azim Panca WardanaUniversitas Halu Oleo1
Marwin MarwinAfiliasi tidak diketahui1
Huzaifa HuzaifaUniversitas Halu Oleo1
Abd. KadirUniversitas Halu Oleo1
Miswan MiswanUniversitas Halu Oleo1
Arsin SisaUniversitas Halu Oleo1
Fijay PranandaUniversitas Halu Oleo1
Tri AgustiUniversitas Halu Oleo1
Rasyid RasminUniversitas Halu Oleo1
Muh Rahmat LukmanUniversitas Halu Oleo1
Asmin AsminUniversitas Halu Oleo1
Saktiawan SaktiawanUniversitas Halu Oleo1
Wildan MuholadAfiliasi tidak diketahui1
Muhammad HasbiAfiliasi tidak diketahui1
Fadhilla InaswaraUniversitas Halu Oleo1
Jusman JusmanUniversitas Halu Oleo1
Abd . KadirUniversitas Halu Oleo1
Pegi Satria Eka PaksiUniversitas Halu Oleo1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://ojs.uho.ac.id/index.php/ENTHALPY/oai, pertama di-harvest 1 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Analisa Getaran Pada Balok Jepit Bebas dan Jepit-Jepit dengan Variasi Posisi Motor Penggetar</dc:title>
	<dc:creator>Faisal, Muhammad</dc:creator>
	<dc:creator>Endriatno, Nanang</dc:creator>
	<dc:creator>Sudia, Budiman</dc:creator>
	<dc:description xml:lang="en-US">This study aims to determine the difference in vibration produced when the position of the vibration source is placed in a different position on the cantilever beam which is supported by fixed-fixed and free-fixed supports. This research used 6061 series aluminum beam with a size of 32 mm x 32 mm x 600 mm. Variations the placement of the exciter of fixed-fixed beams was in the 15 cm, 30 cm, and 45 cm positions, while the fixed-free beams was in the 10 cm, 20 cm, 30 cm, 40 cm, and 50 cm positions. The results of the research on fixed-fixed beams showed that the maximum displacement value was at a position of 30 cm with a value of 0.097 mm, the minimum displacement at 45 cm with a value of 0.04 mm. The maximum velocity value was at a position of 15 cm with a value of 0.653 cm/s, the minimum velocity was at a position of 45 cm with a value of 0.397 cm/s. The maximum acceleration value was at a position of 15 cm with a value of 12.16 m/s², the minimum acceleration was at a position of 45 cm with a value of 8.33 m/s². While the fixed-free beam showed that the maximum displacement value was at a position of 50 cm with a value of 0.197 mm, the minimum displacement at a position of 10 cm with a value of 0.097 mm. The maximum velocity value was at a position of 30 cm with a value of 1.138 cm/s, the minimum velocity at a position of 10 cm with a value of 0.670 cm/s. The maximum acceleration value was at a position of 30 cm with a value of 21,833 m/s², the minimum acceleration was at a position of 10 cm with a value of 9.95 m/s².Keywords: vibration, displacement, velocity, acceleration, aluminum</dc:description>
	<dc:publisher xml:lang="en-US">Teknik Mesin Universitas Halu Oleo</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2022-03-14</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/19131</dc:identifier>
	<dc:identifier>10.55679/enthalpy.v6i2.19131</dc:identifier>
	<dc:source xml:lang="en-US">Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin; Vol 6, No 2 (2021): Enthalpy: Jurnal Ilmiah Mahasiswa Teknik Mesin; 32-37</dc:source>
	<dc:source>2502-8944</dc:source>
	<dc:source>10.55679/enthalpy.v6i2</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/19131/12218</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2021 ENTHALPY</dc:rights>
</oai_dc:dc>