Melola Discovery

← Melola Discovery

Jurnal

Rancang Bangun Blade Turbin Angin Jenis Taper Untuk Pembangkit Listrik Tenaga Bayu Berskala Mikro

Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin · Vol. 6 No. 3 (2021) · hlm. 126–132

DOI
10.55679/enthalpy.v6i3.21026
ISSN
2502-8944
Terbit
2021-10-07
Penerbit
Teknik Mesin Universitas Halu Oleo
Bahasa
eng

Abstrak

The ultization of renewable energy in Indonesian kept on doing as the increase of amount in energy electricity demand as well as environmentally friendly energy requerements, efficient and sustainable. This study aims to learn about the blade’s geometric shapes designed and crafted, as well as the blade’s performance. The study has bee succesfully designed and crafted as soon as tested by the blade’s for a low-scale wind turbine. The design blade’s geometry is a type of taper, is the Horizontal of Axis Wind Turbine type with airfoil NACA 6412. The blade was design with Qblade software and built with a manual engine. The method of data collection was the blade installed on the tower at 30 meters for three days. The energy generated on a daily basis that is the first day, the energy average production is 45,80 watts with an average wind speed of 4,54 m/s, the second day of 55,11 watts with and average wind speed of 5,23 m/s, and the third day of 72,27 watts with an average wind speed 5,14 m/s.Keywords:Airfoil, blade, energy, wind turbine

Jaringan kolaborasi para penulis

40 penulis · 168 tautan kepenulisan bersama · 37 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Halu Oleo
  • Universiti Malaysia Pahang Al-Sultan Abdullah
  • State University of Semarang
  • INTI International University
  • IPB University
  • Universitas Malahayati
  • Tun Hussein Onn University of Malaysia
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Aminur AminurUniversitas Halu Oleo8
Budiman SudiaUniversitas Halu Oleo8
Nanang EndriatnoUniversitas Halu Oleo7
Prinob AksarUniversitas Halu Oleo6
Salimin SaliminUniversitas Halu Oleo5
Deni Fajar FitriyanaState University of Semarang4
Januar Parlaungan SiregarUniversiti Malaysia Pahang Al-Sultan Abdullah4
Tezara CionitaINTI International University4
Samhuddin SamhuddinUniversitas Halu Oleo4
La HasanudinUniversitas Halu Oleo4
Yuspian GunawanUniversitas Halu Oleo4
Agustinus LolokUniversitas Halu Oleo3
Abd. Rahman KadirUniversitas Halu Oleo2
Sudarsono SudarsonoIPB University2
Rozanna DewiMalikussaleh University2
Jamiluddin JaafarTun Hussein Onn University of Malaysia2
M. R. M. RejabUniversiti Malaysia Pahang Al-Sultan Abdullah2
Agung Efriyo HadiUniversitas Malahayati2
La Ode UsmanUniversitas Halu Oleo2
Kadir KadirUniversitas Halu Oleo2
Lukas Kano MangallaUniversitas Halu Oleo2
Sartirlan AliUniversitas Halu Oleo1
Arsin SisaUniversitas Halu Oleo1
Fijay PranandaUniversitas Halu Oleo1
Raden Rinova SisworoUniversitas Halu Oleo1
Muh. Syahrul AnwarUniversitas Halu Oleo1
Muhamad SuparjoAfiliasi tidak diketahui1
Muhamad Ashar SyahrirAfiliasi tidak diketahui1
Saktiawan SaktiawanUniversitas Halu Oleo1
Harlan HarlanUniversitas Halu Oleo1
Abd . KadirUniversitas Halu Oleo1
La Ode AndiUniversitas Halu Oleo1
La Ode YasirUniversitas Halu Oleo1
M SaifulAfiliasi tidak diketahui1
La HasanuddinUniversitas Halu Oleo1
Abd KadirUniversitas Halu Oleo1
Kadir KadirUniversitas Halu Oleo1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://ojs.uho.ac.id/index.php/ENTHALPY/oai, pertama di-harvest 1 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Rancang Bangun Blade Turbin Angin Jenis Taper Untuk Pembangkit Listrik Tenaga Bayu Berskala Mikro</dc:title>
	<dc:creator>Kusmayanto, La Ode Andi</dc:creator>
	<dc:creator>Balaka, Ridway</dc:creator>
	<dc:creator>Imran, Al Ichlas</dc:creator>
	<dc:description xml:lang="en-US">The ultization of renewable energy in Indonesian kept on doing as the increase of amount in energy electricity demand as well as environmentally friendly energy requerements, efficient and sustainable. This study aims to learn about the blade’s geometric shapes designed and crafted, as well as the blade’s performance. The study has bee succesfully designed and crafted as soon as tested by the blade’s for a low-scale wind turbine. The design blade’s geometry is a type of taper, is the Horizontal of Axis Wind Turbine type with airfoil NACA 6412. The blade was design with Qblade software and built with a manual engine. The method of data collection was the blade installed on the tower at 30 meters for three days. The energy generated on a daily basis that is the first day, the energy average production is 45,80 watts with an average wind speed of 4,54 m/s, the second day of 55,11 watts with and average wind speed of 5,23 m/s, and the third day of 72,27 watts with an average wind speed 5,14 m/s.Keywords:Airfoil, blade, energy, wind turbine</dc:description>
	<dc:publisher xml:lang="en-US">Teknik Mesin Universitas Halu Oleo</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2021-10-07</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/21026</dc:identifier>
	<dc:identifier>10.55679/enthalpy.v6i3.21026</dc:identifier>
	<dc:source xml:lang="en-US">Enthalpy : Jurnal Ilmiah Mahasiswa Teknik Mesin; Vol 6, No 3 (2021): Enthalpy: Jurnal Ilmiah Mahasiswa Teknik Mesin; 126-132</dc:source>
	<dc:source>2502-8944</dc:source>
	<dc:source>10.55679/enthalpy.v6i3</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs.uho.ac.id/index.php/ENTHALPY/article/view/21026/13030</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2021 ENTHALPY</dc:rights>
</oai_dc:dc>