Melola Discovery

← Melola Discovery

Jurnal SINTA 2

Penerapan Mekanisme Komunikasi Multi-hop pada Bluetooth Low Energy

Jurnal Teknologi Informasi dan Ilmu Komputer (JTIIK) · Vol. 9 No. 2 (2022) · pp. 435–442

DOI
10.25126/jtiik.2022925684
ISSN
2528-6579, 2355-7699
Published
2022-02-24
Publisher
Fakultas Ilmu Komputer, Universitas Brawijaya
Language
id

Abstract

Seiring dengan berjalannya waktu, perkembangan teknologi akan semakin pesat, begitu pun teknologi dalam bidang wireless communication atau komunikasi tanpa kabel. Salah satu teknologi wireless yang sudah ada cukup lama adalah Bluetooth, adapun pengembangan dari teknologi Bluetooth adalah Bluetooth Low Energy (BLE). Tujuan dikembangkannya BLE adalah agar sumber daya yang digunakan saat proses transmisi data lebih rendah dari Bluetooth yang sudah ada sebelumnya. Adapun terdapat beberapa batasan yang ada pada Bluetooth Low Energy (BLE), salah satunya adalah hanya dapat berkomunikasi satu dengan yang lainnya dalam jarak yang dekat dikarenakan adanya keterbatasan sumber daya. Berdasarkan dari permasalahan tersebut, pada penelitian ini dirancang mekanisme komunikasi multi-hop pada BLE untuk mengatasi permasalahan jarak yang terbatas. Pada penelitian ini, topologi yang digunakan adalah topologi tree, dan hardware yang digunakan adalah ESP32. Hasil yang didapat menunjukkan mekanisme komunikasi multi-hop pada BLE yang dirancang dapat diterapkan dengan sukses. Hasil pengujian menunjukkan bahwa pengiriman data dari sebuah Sensor Node ke Sink Node yang melewati dua Relay Node (3-hop) membutuhkan waktu rata-rata 1846,4 ms.AbstractTechnology has been being developed very fast in the last couple years. One of that technology is wireless communication. There are so many wirelees communication technologies arround us nowadays, such as Wi-Fi, LoRa, Zigbee,and Bluetooth. The recent update of Bluetooth technology is Bluetooth Low Energy (BLE). The purpose of developing BLE is to decrease the energy used during the data transmission process. But there are some limitations in BLE. One of them is that we can only communicate with each other in a short distance due to resources limitation. Based on these problem, in this research we want to implement the multi-hop communication mechanism on BLE to overcome short distance communication problem. In this research, we use tree topology and ESP32 as the hardware. The results of this research shows that the mechanism of multi-hop communication on BLE can be applied successfully. The experiment result shows that the transmissionof data from a Sensor Node to a Sink Node through two Relay Nodes (3-hops) needs the average time of 1846,4 ms.

Collaboration network of the authors

40 authors · 113 co-authorship links · 18 across different organisations · showing the 40 most connected

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • University of Brawijaya
  • Politeknik Negeri Malang
  • Indonesia Open University
  • Institut Teknologi, Sains, dan Kesehatan RS.DR. Soepraoen Kesdam V/BRW
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Rakhmadhany PrimanandaUniversity of Brawijaya4
Wijaya KurniawanUniversity of Brawijaya3
Hurriyatul FitriyahUniversity of Brawijaya2
Rizal MaulanaUniversity of Brawijaya2
Eko SetiawanUniversity of Brawijaya2
Barlian Henryranu PrasetioUniversity of Brawijaya2
Agung Setia BudiAffiliation unknown2
Sabriansyah Rizqika AkbarUniversity of Brawijaya2
Eko Agus SetiawanUniversity of Brawijaya1
Mochamad Afief HamidiUniversity of Brawijaya1
Widhi YahyaUniversity of Brawijaya1
Widhy Hayuhardhika Nugraha PutraUniversity of Brawijaya1
Dahnial SyauqyUniversity of Brawijaya1
Indrazno SiradjuddinPoliteknik Negeri Malang1
Ferdian RonilayaPoliteknik Negeri Malang1
Budi Eko PrasetyoPoliteknik Negeri Malang1
Sigi Syah WibowoPoliteknik Negeri Malang1
Supriatna AdhisuwignjoPoliteknik Negeri Malang1
Yohanna Fransiska AladinaUniversity of Brawijaya1
Reza Andria SiregarUniversity of Brawijaya1
Primantara Hari TrisnawanUniversity of Brawijaya1
Achmad BasukiUniversity of Brawijaya1
Muhammad Naufal DzakieUniversity of Brawijaya1
Angga Sukma BahariUniversity of Brawijaya1
Mahardeka Tri AnantaUniversity of Brawijaya1
Jeffry Atur FirdausUniversity of Brawijaya1
Muhammad Fawwaz Dynoeputra IsnandarUniversity of Brawijaya1
Giservin Tifira ZainUniversity of Brawijaya1
Edita Rosana WidasariUniversity of Brawijaya1
Ragil Hadi PrasetyoUniversity of Brawijaya1
Nanda Amaliatus SholichaUniversity of Brawijaya1
Risqy Siwi PradiniInstitut Teknologi, Sains, dan Kesehatan RS.DR. Soepraoen Kesdam V/BRW1
Mayang Anglingsari PutriAffiliation unknown1
Risqy Siwi PradiniAffiliation unknown1
Denisha Trihapningsari TrihapningsariAffiliation unknown1
Mayang Anglingsari PutriIndonesia Open University1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://jtiik.ub.ac.id/index.php/jtiik/en/oai, first harvested 27 Okt 2026, last seen 27 Okt 2026.
Original metadata (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="id">Penerapan Mekanisme Komunikasi Multi-hop pada Bluetooth Low Energy</dc:title>
	<dc:creator xml:lang="id">Budi, Agung Setia</dc:creator>
	<dc:creator xml:lang="id">Hanif Azhar Efendi, Muhammad</dc:creator>
	<dc:creator xml:lang="id">Bhawiyuga, Adhitya</dc:creator>
	<dc:creator xml:lang="id">Ichsan, Mochammad Hannats Hanafi</dc:creator>
	<dc:description xml:lang="id">Seiring dengan berjalannya waktu, perkembangan teknologi akan semakin pesat, begitu pun teknologi dalam bidang wireless communication atau komunikasi tanpa kabel. Salah satu teknologi wireless yang sudah ada cukup lama adalah Bluetooth, adapun pengembangan dari teknologi Bluetooth adalah Bluetooth Low Energy (BLE). Tujuan dikembangkannya BLE adalah agar sumber daya yang digunakan saat proses transmisi data lebih rendah dari Bluetooth yang sudah ada sebelumnya. Adapun terdapat beberapa batasan yang ada pada Bluetooth Low Energy (BLE), salah satunya adalah hanya dapat berkomunikasi satu dengan yang lainnya dalam jarak yang dekat dikarenakan adanya keterbatasan sumber daya. Berdasarkan dari permasalahan tersebut, pada penelitian ini dirancang mekanisme komunikasi multi-hop pada BLE untuk mengatasi permasalahan jarak yang terbatas. Pada penelitian ini, topologi yang digunakan adalah topologi tree, dan hardware yang digunakan adalah ESP32. Hasil yang didapat menunjukkan mekanisme komunikasi multi-hop pada BLE yang dirancang dapat diterapkan dengan sukses. Hasil pengujian menunjukkan bahwa pengiriman data dari sebuah Sensor Node ke Sink Node yang melewati dua Relay Node (3-hop) membutuhkan waktu rata-rata 1846,4 ms.AbstractTechnology has been being developed very fast in the last couple years. One of that technology is wireless communication. There are so many wirelees communication technologies arround us nowadays, such as Wi-Fi, LoRa, Zigbee,and Bluetooth. The recent update of Bluetooth technology is Bluetooth Low Energy (BLE). The purpose of developing BLE is to decrease the energy used during the data transmission process. But there are some limitations in BLE. One of them is that we can only communicate with each other in a short distance due to resources limitation. Based on these problem, in this research we want to implement the multi-hop communication mechanism on BLE to overcome short distance communication problem. In this research, we use tree topology and ESP32 as the hardware. The results of this research shows that the mechanism of multi-hop communication on BLE can be applied successfully. The experiment result shows that the transmissionof data from a Sensor Node to a Sink Node through two Relay Nodes (3-hops) needs the average time of 1846,4 ms.</dc:description>
	<dc:publisher xml:lang="en">Fakultas Ilmu Komputer, Universitas Brawijaya</dc:publisher>
	<dc:date>2022-02-24</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://jtiik.ub.ac.id/index.php/jtiik/article/view/5684</dc:identifier>
	<dc:identifier>10.25126/jtiik.2022925684</dc:identifier>
	<dc:source xml:lang="id">Jurnal Teknologi Informasi dan Ilmu Komputer; Vol 9 No 2: April 2022; 435-442</dc:source>
	<dc:source xml:lang="en">Jurnal Teknologi Informasi dan Ilmu Komputer; Vol. 9 No. 2: April 2022; 435-442</dc:source>
	<dc:source>2528-6579</dc:source>
	<dc:source>2355-7699</dc:source>
	<dc:source>10.25126/jtiik.202292</dc:source>
	<dc:language>id</dc:language>
	<dc:relation>https://jtiik.ub.ac.id/index.php/jtiik/article/view/5684/pdf</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2022 Jurnal Teknologi Informasi dan Ilmu Komputer</dc:rights>
</oai_dc:dc>