Melola Discovery

← Melola Discovery

Jurnal SINTA 2

Sistem Monitoring Gelombang Osilometrik Menggunakan Arduino dan Smartphone

Jurnal Teknologi Informasi dan Ilmu Komputer (JTIIK) · Vol. 9 No. 7 (2022) · pp. 1333–1340

DOI
10.25126/jtiik.2022976728
ISSN
2528-6579, 2355-7699
Published
2022-12-29
Publisher
Fakultas Ilmu Komputer, Universitas Brawijaya
Language
id

Abstract

Tekanan darah terjadi ketika arteri pembuluh darah dipompa oleh jantung ke seluruh tubuh. Ada dua elemen penting yang dipertimbangkan untuk mengukur tekanan darah, yaitu sistolik dan diastolik. Sistolik adalah nilai tekanan darah ketika otot-otot di jantung mendorong darah dari jantung itu sendiri ke dinding arteri. Sedangkan diastolik adalah nilai tekanan darah pada saat otot-otot ventrikel jantung dalam keadaan istirahat. Di era modern, pengukuran tekanan darah menggunakan sinyal listrik dari sensor dan dianalisis untuk mengetahui kesehatan organ tubuh. Namun dalam praktiknya, sistem pemantauan tekanan darah hanya dapat didengar oleh dokter, tanpa direkam untuk analisis lebih lanjut. Untuk mengakhiri hal ini, kami mengusulkan sistem pengukuran tekanan darah yang tidak hanya mengukur tekanan darah tetapi juga memantau sinyal osylometric ke dalam smartphone. Sinyal osylometric diproses oleh Arduino UNO R3 dari sensor Tekanan MPX55500DP. Arduino diprogram untuk mengaktifkan pompa udara dan memompanya ke dalam manset. Kemudian, sinyal osilometrik ditransmisikan ke aplikasi smartphone Android. Kami menggunakan Modul Bluetooth HC-05 untuk mengirimkan data dari Arduino ke Smartphone Android. AbstractBlood pressure occures when the arteries of blood vessels is pumped by the heart to the whole body. There are two important elements that is considered to measure the blood pressures, it is called systolic and diastolic. Systolic is a value of blood pressure when muscles on the heart pushes blood from the heart itself to the artery walls. Whereas, diastolic is a value of blood pressure when the heart ventrical muscles in the heart is resting. In the modern era, blood pressure measurement uses electrical signals from the sensor and be analyzed to determine the health of the organs. However, in practice, the blood pressure monitoring system only can be heard by doctor, without recorded it for more advanced analysis. To end this, we propose a blood preasure measurement system that is not only measure the blood pressure but it also monitors the the osylometric signal into smartphone. The osylometric signal is processed by Arduino UNO R3 from MPX55500DP Pressure sensor. The Arduino is programmed for enabling the air pump and pump it into cuff. Then, the osylometric signal is transmitted to a application of Android smartphones. We use a Bluetooth HC-05 Module to transmit data from the Arduino into Android Smartphone.

Collaboration network of the authors

31 authors · 72 co-authorship links

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • University of Brawijaya
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Wijaya KurniawanUniversity of Brawijaya5
Dahnial SyauqyUniversity of Brawijaya4
Edita Rosana WidasariUniversity of Brawijaya3
Eko SetiawanUniversity of Brawijaya2
Sabriansyah Rizqika AkbarUniversity of Brawijaya2
Rakhmadhany PrimanandaUniversity of Brawijaya2
Heru NurwarsitoUniversity of Brawijaya1
Denny Sagita RusdiantoUniversity of Brawijaya1
Eko Agus SetiawanUniversity of Brawijaya1
Mochamad Afief HamidiUniversity of Brawijaya1
Agung Setia BudiUniversity of Brawijaya1
Adhitya BhawiyugaUniversity of Brawijaya1
Muhammad Hanif Azhar EfendiUniversity of Brawijaya1
Lindhu Parang KusumaUniversity of Brawijaya1
Eko SetiawanUniversity of Brawijaya1
Angga Sukma BahariUniversity of Brawijaya1
Mahardeka Tri AnantaUniversity of Brawijaya1
Ryzaldi Ananda FabianaUniversity of Brawijaya1
Syahrul ChilmiUniversity of Brawijaya1
Septiyo Budi PerkasaUniversity of Brawijaya1
Rizal MaulanaUniversity of Brawijaya1
Fakhrul AllaamUniversity of Brawijaya1
Rekyan Regasari Mardi PutriUniversity of Brawijaya1
Irfan Muzakky NurrizqyUniversity of Brawijaya1
Arsal Wildan NaviaddinUniversity of Brawijaya1
JevandikaUniversity of Brawijaya1
Brylliano Maza PutraUniversity of Brawijaya1
Syifa’ Hukma ShabiyyaAffiliation unknown1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://jtiik.ub.ac.id/index.php/jtiik/en/oai, first harvested 27 Okt 2026, last seen 27 Okt 2026.
Original metadata (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="id">Sistem Monitoring Gelombang Osilometrik Menggunakan Arduino dan Smartphone</dc:title>
	<dc:creator xml:lang="id">Isnandar, Muhammad Fawwaz Dynoeputra</dc:creator>
	<dc:creator xml:lang="id">Prasetio, Barlian Henryranu</dc:creator>
	<dc:creator xml:lang="id">Ichsan, Mochammad Hannats Hanafi</dc:creator>
	<dc:description xml:lang="id">Tekanan darah terjadi ketika arteri pembuluh darah dipompa oleh jantung ke seluruh tubuh. Ada dua elemen penting yang dipertimbangkan untuk mengukur tekanan darah, yaitu sistolik dan diastolik. Sistolik adalah nilai tekanan darah ketika otot-otot di jantung mendorong darah dari jantung itu sendiri ke dinding arteri. Sedangkan diastolik adalah nilai tekanan darah pada saat otot-otot ventrikel jantung dalam keadaan istirahat. Di era modern, pengukuran tekanan darah menggunakan sinyal listrik dari sensor dan dianalisis untuk mengetahui kesehatan organ tubuh. Namun dalam praktiknya, sistem pemantauan tekanan darah hanya dapat didengar oleh dokter, tanpa direkam untuk analisis lebih lanjut. Untuk mengakhiri hal ini, kami mengusulkan sistem pengukuran tekanan darah yang tidak hanya mengukur tekanan darah tetapi juga memantau sinyal osylometric ke dalam smartphone. Sinyal osylometric diproses oleh Arduino UNO R3 dari sensor Tekanan MPX55500DP. Arduino diprogram untuk mengaktifkan pompa udara dan memompanya ke dalam manset. Kemudian, sinyal osilometrik ditransmisikan ke aplikasi smartphone Android. Kami menggunakan Modul Bluetooth HC-05 untuk mengirimkan data dari Arduino ke Smartphone Android. AbstractBlood pressure occures when the arteries of blood vessels is pumped by the heart to the whole body. There are two important elements that is considered to measure the blood pressures, it is called systolic and diastolic. Systolic is a value of blood pressure when muscles on the heart pushes blood from the heart itself to the artery walls. Whereas, diastolic is a value of blood pressure when the heart ventrical muscles in the heart is resting. In the modern era, blood pressure measurement uses electrical signals from the sensor and be analyzed to determine the health of the organs. However, in practice, the blood pressure monitoring system only can be heard by doctor, without recorded it for more advanced analysis. To end this, we propose a blood preasure measurement system that is not only measure the blood pressure but it also monitors the the osylometric signal into smartphone. The osylometric signal is processed by Arduino UNO R3 from MPX55500DP Pressure sensor. The Arduino is programmed for enabling the air pump and pump it into cuff. Then, the osylometric signal is transmitted to a application of Android smartphones. We use a Bluetooth HC-05 Module to transmit data from the Arduino into Android Smartphone.</dc:description>
	<dc:publisher xml:lang="en">Fakultas Ilmu Komputer, Universitas Brawijaya</dc:publisher>
	<dc:date>2022-12-29</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://jtiik.ub.ac.id/index.php/jtiik/article/view/6728</dc:identifier>
	<dc:identifier>10.25126/jtiik.2022976728</dc:identifier>
	<dc:source xml:lang="id">Jurnal Teknologi Informasi dan Ilmu Komputer; Vol 9 No 7: Spesial Issue Seminar Nasional Teknologi dan Rekayasa Informasi (SENTRIN) 2022; 1333-1340</dc:source>
	<dc:source xml:lang="en">Jurnal Teknologi Informasi dan Ilmu Komputer; Vol. 9 No. 7: Spesial Issue Seminar Nasional Teknologi dan Rekayasa Informasi (SENTRIN) 2022; 1333-1340</dc:source>
	<dc:source>2528-6579</dc:source>
	<dc:source>2355-7699</dc:source>
	<dc:source>10.25126/jtiik.202297</dc:source>
	<dc:language>id</dc:language>
	<dc:relation>https://jtiik.ub.ac.id/index.php/jtiik/article/view/6728/pdf</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2022 Jurnal Teknologi Informasi dan Ilmu Komputer</dc:rights>
</oai_dc:dc>