Melola Discovery

← Melola Discovery

Open access Jurnal

Analysis Of Laying And The Need For Cathodic Protection On Single Point Mooring Type Catenary Anchor Leg Mooring Buoy 035 Owned By PT. Pertamina Fuel Terminal Tuban

Maritime Park: Journal of Maritime Technology and Society · Vol. ume (2022) · pp. 40–45

DOI
10.62012/mp.v1i1.19946
ISSN
2828-6669, 2828-7010
Published
2022-02-28
Publisher
Department of Ocean Engineering, Faculty of Engineering, Hasanuddin University
Language
en
License
creativecommons.org/licenses/by/4.0

Abstract

Corrosion is one of the most common causes of damage to mooring buoys due to oxidation on the surface of the steel plate. The purpose of this study was to determine the need and placement of cathodic protection as well as the costs required in procuring cathodic protection on moorings buoy using the rules of BKI (Indonesian Classification Bureau) and DNV (Det Norske Veritas Industry Norway). In the cathodic protection system there are two methods of cathodic protection, namely Sacrificial Anode Cathodic Protection (Sacrificial Anode) and Impressed Current Cathodic Protection (ICCP). In this study, the sacrificial anode method was used because the installation is simpler so it does not require special skills and the anode connector is cathodic protected. Mooring buoy with a height of m, a diameter of meters with a cathodic protection design life of 5 years. The anode used in this study is an anode with a Longated flush-mounted Z9.0H1 (Welded Type) with dimensions of 355 x 85 x 45 mm. From the results of this study, it was found that the total anode mass needed to protect the mooring buoy is 26.95 kg with the installation distance between the anodes on the topside hull plate is 34.557 m and the bottom swim hull plate is 47.123 m and the estimated cost required to provide mooring buoy is IDR 4,284,900.

Keywords

Collaboration network of the authors

40 authors · 94 co-authorship links · showing the 40 most connected

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Universitas Teknologi Yogyakarta
  • Universitas Halu Oleo
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Chairul PaotonanAffiliation unknown21
Hasdinar UmarAffiliation unknown4
Sabaruddin RahmanAffiliation unknown2
Adriani PhadyAffiliation unknown2
Muhammad Zubair Muis AlieAffiliation unknown2
Fitri Ramadani RahimAffiliation unknown2
Achmad Yasir BaedaAffiliation unknown1
Taufiqurrahman TaufiqurrahmanAffiliation unknown1
Ilham AlkhaerAffiliation unknown1
Ichwanul Haq BahtiarAffiliation unknown1
Bulan PurnamaAffiliation unknown1
Siti Arifaini SulemanAffiliation unknown1
Fitrahwati NurAffiliation unknown1
Putri Sriwahyuni KasbaAffiliation unknown1
Yuliani SulemanAffiliation unknown1
Reskiyanti ReskiyantiAffiliation unknown1
Dadang A. SuriamiharjaAffiliation unknown1
Putri Ayu Novia LestariAffiliation unknown1
Safitri SafitriAffiliation unknown1
Irma HandayaniUniversitas Teknologi Yogyakarta1
Riska DamayantAffiliation unknown1
Royh Savhanta TonapaAffiliation unknown1
Denis Restuardi DunduAffiliation unknown1
Andi Yudha PratamaAffiliation unknown1
Muhammad Ayyub Ansyari BAffiliation unknown1
ZULFIKAR ZULFIKARUniversitas Halu Oleo1
Zakinah RizkyAffiliation unknown1
Indah Puspita SariAffiliation unknown1
Indah Melati SuciAffiliation unknown1
Nur RachmiAffiliation unknown1
Nabila Ainun Nur RahmatAffiliation unknown1
Windi WidianingrumAffiliation unknown1
Irfaniyanti IrfaniyantiAffiliation unknown1
Mu’minatung NisaAffiliation unknown1
Geby Pata’dunganAffiliation unknown1
Adil Farhan PrasetyoAffiliation unknown1
Denis Restuardi DunduAffiliation unknown1
Andi Muhammad Maulid MasriAffiliation unknown1
Muhammad Andika Samudera AwalAffiliation unknown1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://journal.unhas.ac.id/index.php/maritimepark/oai, first harvested 2 Nov 2026, last seen 2 Nov 2026.
Original metadata (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Analysis Of Laying And The Need For Cathodic Protection On Single Point Mooring Type Catenary Anchor Leg Mooring Buoy 035 Owned By PT. Pertamina Fuel Terminal Tuban</dc:title>
	<dc:creator xml:lang="en">Rachman, Taufiqur</dc:creator>
	<dc:subject xml:lang="en">Mooring Buoy, Corrosion, Zinc Anode</dc:subject>
	<dc:description xml:lang="en">Corrosion is one of the most common causes of damage to mooring buoys due to oxidation on the surface of the steel plate. The purpose of this study was to determine the need and placement of cathodic protection as well as the costs required in procuring cathodic protection on moorings buoy using the rules of BKI (Indonesian Classification Bureau) and DNV (Det Norske Veritas Industry Norway). In the cathodic protection system there are two methods of cathodic protection, namely Sacrificial Anode Cathodic Protection (Sacrificial Anode) and Impressed Current Cathodic Protection (ICCP). In this study, the sacrificial anode method was used because the installation is simpler so it does not require special skills and the anode connector is cathodic protected. Mooring buoy with a height of m, a diameter of meters with a cathodic protection design life of 5 years. The anode used in this study is an anode with a Longated flush-mounted Z9.0H1 (Welded Type) with dimensions of 355 x 85 x 45 mm. From the results of this study, it was found that the total anode mass needed to protect the mooring buoy is 26.95 kg with the installation distance between the anodes on the topside hull plate is 34.557 m and the bottom swim hull plate is 47.123 m and the estimated cost required to provide mooring buoy is IDR 4,284,900.</dc:description>
	<dc:publisher xml:lang="en">Department of Ocean Engineering, Faculty of Engineering, Hasanuddin University</dc:publisher>
	<dc:date>2022-02-28</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unhas.ac.id/index.php/maritimepark/article/view/19946</dc:identifier>
	<dc:identifier>10.62012/mp.v1i1.19946</dc:identifier>
	<dc:source xml:lang="en">Maritime Park: Journal of Maritime Technology and Society; Volume 1, Issue 1, 2022; 40-45</dc:source>
	<dc:source>2828-6669</dc:source>
	<dc:source>2828-7010</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://journal.unhas.ac.id/index.php/maritimepark/article/view/19946/10820</dc:relation>
	<dc:rights xml:lang="en">https://creativecommons.org/licenses/by/4.0</dc:rights>
</oai_dc:dc>