Melola Discovery

← Melola Discovery

Jurnal

Physical Test of Ecoaquatic block Making Using a Mixture of PET Type Plastic Waste (Polyethylene Terephthalate) and Sand as a Layer of Sandy Soil Pond Construction

JASDev Journal of Aquaculture Studies and Development · Vol. UME No. MOR (2023) · pp. 1–9

ISSN
0000-0000, 0000-0000
Published
2023-02-06
Publisher
Aquaculture Study Program, Faculty of Marine Scince and Fisheries, Hasanuddin University
Language
en

Abstract

Ecoaquatic is a pond that consists of plastic and sand. To avoid water leakage, the pond construction is equipped with ecoaquatic block with a thickness of 6 cm and on top of plastic coated with sand 3-5 cm thick at the bottom of the pond. the purpose of this research is to analyze the press strength and water repellant of ecoaquatic block making using a mixture of PET Type Plastic Waste (Polyethylene terephthalate) and sand as a layer of sandy soil pond construction. Ecoaquatic blocks are made from a mixture of PET, plastics, sand and oil. The research was designed with a randomized design complete with the treatment of four compositions of plastic and sand comparison, namely 50: 50%, 60: 40%, 70: 30%, 80: 20%, controls and three repeats for each treatment. Ecoaquatic block testing is carried out at the age of 14 and 28 days. Ecoaquatic blocks are dried up to the testing period. The results showed that the highest strong press yield was found in the ratio of 50:50% which reached 20.42 ± 0.26 and 21.25 ± 0.73 Mpa. Meanwhile, water repellant test results showed in the ratio of 80:20% is a comparison that has the highest water repellant values were 94.49 ± 0.44 and 95.78 ± 0.42%. Based on the quality requirements of SNI 03-0691-1996 a ratio of 50:50% qualified and entered into the category of quality B. Keywords: ecoaquatic block, plastic type PET (Polyethylene terephthalate), strong press, water absorption

Keywords

Collaboration network of the authors

17 authors · 121 co-authorship links

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Institut Agama Islam Negeri Kendari
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Rustam RustamAffiliation unknown1
Zainuddin ZainuddinInstitut Agama Islam Negeri Kendari1
Badraeni BadraeniAffiliation unknown1
Andi Aliah HidayaniAffiliation unknown1
Besse Tenri NurkamilahAffiliation unknown1
Dody Dh. TrijunoAffiliation unknown1
Elmi N. ZainuddinAffiliation unknown1
Edison SaadeAffiliation unknown1
Gunarto LatamaAffiliation unknown1
Hasni Y. AzisAffiliation unknown1
Irfan AmbasAffiliation unknown1
M. Iqbal DjawadAffiliation unknown1
Muh. Yusri KarimAffiliation unknown1
Siti AslamyahAffiliation unknown1
Yushinta FujayaAffiliation unknown1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://journal.unhas.ac.id/index.php/jasdev/oai, first harvested 2 Nov 2026, last seen 2 Nov 2026.
Original metadata (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Physical Test of Ecoaquatic block Making Using a Mixture of PET Type Plastic Waste (Polyethylene Terephthalate) and Sand as a Layer of Sandy Soil Pond Construction</dc:title>
	<dc:creator xml:lang="en">Hamka, Fachrul</dc:creator>
	<dc:creator xml:lang="en">Achmad, Marlina </dc:creator>
	<dc:subject xml:lang="en">ecoaquatic block</dc:subject>
	<dc:subject xml:lang="en">plastic type PET (Polyethylene terephthalate)</dc:subject>
	<dc:subject xml:lang="en">strong press</dc:subject>
	<dc:subject xml:lang="en">water repellent</dc:subject>
	<dc:description xml:lang="en">Ecoaquatic is a pond that consists of plastic and sand. To avoid water leakage, the pond construction is equipped with ecoaquatic block with a thickness of 6 cm and on top of plastic coated with sand 3-5 cm thick at the bottom of the pond. the purpose of this research is to analyze the press strength &amp;nbsp;and water repellant of ecoaquatic block making using a mixture of PET Type Plastic Waste (Polyethylene terephthalate) and sand as a layer of sandy soil pond construction. Ecoaquatic blocks are made from a mixture of PET, plastics, sand and oil. The research was designed with a randomized design complete with the treatment of four compositions of plastic and sand comparison, namely 50: 50%, 60: 40%, 70: 30%, 80: 20%, controls and three repeats for each treatment. Ecoaquatic block testing is carried out at the age of 14 and 28 days. Ecoaquatic blocks are dried up to the testing period. The results showed that the highest strong press yield was found in the ratio of 50:50% which reached 20.42 ± 0.26 and 21.25 ± 0.73 Mpa. Meanwhile, water repellant test results showed in the ratio of 80:20% is a comparison that has the highest water repellant values were 94.49 ± 0.44 and 95.78 ± 0.42%. Based on the quality requirements of SNI 03-0691-1996 a ratio of 50:50% qualified and entered into the category of quality B.
Keywords: ecoaquatic block, plastic type PET (Polyethylene terephthalate), strong press, water absorption</dc:description>
	<dc:publisher xml:lang="en">Aquaculture Study Program, Faculty of Marine Scince and Fisheries, Hasanuddin University</dc:publisher>
	<dc:date>2023-02-06</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en">Peer-reviewed Articles</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unhas.ac.id/index.php/jasdev/article/view/13173</dc:identifier>
	<dc:source xml:lang="en">JASDev Journal of Aquaculture Studies and Development; VOLUME 1 NOMOR 1, FEBRUARY 2023; 1-9</dc:source>
	<dc:source>0000-0000</dc:source>
	<dc:source>0000-0000</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://journal.unhas.ac.id/index.php/jasdev/article/view/13173/9307</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2023 JASDev Journal of Aquaculture Studies and Development</dc:rights>
</oai_dc:dc>