Melola Discovery

← Melola Discovery

Open access Jurnal

Improvement Process for Plate Heat Exchanger Type of M15 at PT. Janata Marina Indah (JMI) Semarang

Proses Perbaikan Plate Heat Exchanger Tipe M15 di PT. Janata Marina Indah (JMI) Semarang

Zona Laut Jurnal Inovasi Sains Dan Teknologi Kelautan · Vol. ume (2020) · pp. 6–10

DOI
10.62012/zl.v1i1.9651
ISSN
2721-5717, 2747-2124
Published
2020-03-11
Publisher
Departemen Teknik Kelautan Universitas Hasanuddin
Language
id
License
creativecommons.org/licenses/by/4.0

Abstract

English

Most of the heat exchangers onboard are in the form of shell and tube. Another form is the plate heat exchanger (PHE). The advantage of PHE is that it has a very large displacement surface at a small volume of tools. Selection of suitable gasket material for PHE is very important. It is intended for a long service life of PHE. The research has been conducted at the shipyard of PT. JMI Semarang to find out the location and cause of plate leakage from PHE. PHE observations and improvements are carried out when the ship is docked at the shipyard. Repairs were made directly in the form of operational data and manual book PHE type of M15.

Bahasa Indonesia

Heat exchanger di kapal kebanyakan berbentuk shell and tube. Bentuk yang lain adalah plate heat exchanger (PHE). Kelebihan PHE adalah mempunyai permukaan perpindahan yang sangat besar pada volume alat yang kecil. Pemilihan material gasket yang sesuai pada PHE merupakan hal yang sangat penting. Hal ini bertujuan untuk umur pemakaian PHE yang lama. Penelitian telah dilakukan di galangan kapal PT. JMI Semarang untuk mengetahui letak dan penyebab kebocoran pelat dari PHE. Pengamatan dan perbaikan PHE dilakukan saat kapal naik dock di galangan tersebut. Perbaikan dilakukan secara langsung berupa data operasional dan manual book PHE tipe M15.

Keywords

Collaboration network of the authors

23 authors · 35 co-authorship links

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Universitas Halu Oleo
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Bambang Sri WaluyoAffiliation unknown2
Makkulau MakkulauAffiliation unknown1
Hafiludin SamparadjaAffiliation unknown1
Gunawan GunawanAffiliation unknown1
Jopang JopangUniversitas Halu Oleo1
Heri SetyawanAffiliation unknown1
Koko SetiawanAffiliation unknown1
Subakho Aryo SalokoAffiliation unknown1
Alvira Nadya Nur AfifahAffiliation unknown1
Suhintam PusarawatiAffiliation unknown1
Nurdjanah HamidAffiliation unknown1
Ria Mardiana YusufAffiliation unknown1
Besse HasriantiAffiliation unknown1
Muhammad Afif FadilaAffiliation unknown1
Sarwoko SarwokoAffiliation unknown1
Iwan IwanAffiliation unknown1
Ilyasa Fastabiq AhsanAffiliation unknown1
Yara Ashfiya Bihamdiya AssawaAffiliation unknown1
Putri Marliana HamzahAffiliation unknown1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://journal.unhas.ac.id/index.php/zonalaut/oai, first harvested 2 Nov 2026, last seen 2 Nov 2026.
Original metadata (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Improvement Process for Plate Heat Exchanger Type of M15 at PT. Janata Marina Indah (JMI) Semarang</dc:title>
	<dc:title xml:lang="id">Proses Perbaikan Plate Heat Exchanger Tipe M15 di PT. Janata Marina Indah (JMI) Semarang</dc:title>
	<dc:creator xml:lang="id">Yusim, Adi Kurniawan</dc:creator>
	<dc:creator xml:lang="id">Utomo, Budi</dc:creator>
	<dc:creator xml:lang="id">Suharto, Suharto</dc:creator>
	<dc:creator xml:lang="id">Hartono, Hartono</dc:creator>
	<dc:creator xml:lang="en">Utomo, Budi</dc:creator>
	<dc:creator xml:lang="en">Suharto, Suharto</dc:creator>
	<dc:creator xml:lang="en">Hartono, Hartono</dc:creator>
	<dc:subject xml:lang="id">Perbaikan, Plate Heat Exchanger, Gasket.</dc:subject>
	<dc:subject xml:lang="en">Repair, Plate Heat Exchanger, Gaskets.</dc:subject>
	<dc:description xml:lang="en">Most of the heat exchangers onboard are in the form of shell and tube. Another form is the plate heat exchanger (PHE). The advantage of PHE is that it has a very large displacement surface at a small volume of tools. Selection of suitable gasket material for PHE is very important. It is intended for a long service life of PHE. The research has been conducted at the shipyard of PT. JMI Semarang to find out the location and cause of plate leakage from PHE. PHE observations and improvements are carried out when the ship is docked at the shipyard. Repairs were made directly in the form of operational data and manual book PHE type of M15.</dc:description>
	<dc:description xml:lang="id">Heat exchanger di kapal kebanyakan berbentuk shell and tube. Bentuk yang lain adalah plate heat exchanger (PHE). Kelebihan PHE adalah mempunyai permukaan perpindahan yang sangat besar pada volume alat yang kecil. Pemilihan material gasket yang sesuai pada PHE merupakan hal yang sangat penting. Hal ini bertujuan untuk umur pemakaian PHE yang lama. Penelitian telah dilakukan di galangan kapal PT. JMI Semarang untuk mengetahui letak dan penyebab kebocoran pelat dari PHE. Pengamatan dan perbaikan PHE dilakukan saat kapal naik dock di galangan tersebut. Perbaikan dilakukan secara langsung berupa data operasional dan manual book PHE tipe M15.</dc:description>
	<dc:publisher xml:lang="en">Departemen Teknik Kelautan Universitas Hasanuddin</dc:publisher>
	<dc:date>2020-03-11</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unhas.ac.id/index.php/zonalaut/article/view/9651</dc:identifier>
	<dc:identifier>10.62012/zl.v1i1.9651</dc:identifier>
	<dc:source xml:lang="en">Zona Laut Jurnal Inovasi Sains Dan Teknologi Kelautan; Volume 1, Number 1, March 2020 Edition; 6-10</dc:source>
	<dc:source xml:lang="id">Zona Laut : Jurnal Inovasi Sains Dan Teknologi  Kelautan; Volume 1, Nomor 1, Edisi Maret 2020; 6-10</dc:source>
	<dc:source>2721-5717</dc:source>
	<dc:source>2747-2124</dc:source>
	<dc:language>id</dc:language>
	<dc:relation>https://journal.unhas.ac.id/index.php/zonalaut/article/view/9651/4930</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2020 Zona Laut : Jurnal Inovasi dan Teknologi Kelautan</dc:rights>
	<dc:rights xml:lang="en">https://creativecommons.org/licenses/by/4.0</dc:rights>
</oai_dc:dc>