Akses terbuka Jurnal
Experimental Study on The Effect of Epoxy Zinc and Thinner Ratio on Platform Structure Coating Quality
Zona Laut Jurnal Inovasi Sains Dan Teknologi Kelautan · Vol. ume (2025) · hlm. 303–311
- ISSN
- 2721-5717, 2747-2124
- Terbit
- 2025-07-29
- Penerbit
- Departemen Teknik Kelautan Universitas Hasanuddin
- Bahasa
- en
Abstrak
Inggris
Paint serves as a coating material that provides aesthetic value, adhesive strength, and protection to surfaces from environmental corrosion. The one of critical aspect is the paint and thinner ratio, which can influence adhesive strength and the performance of protection. This experimental study investigates the effect of varying ratios of epoxy zinc paint (Avantguard 750) and thinner (08450) on adhesion strength and drying rate. Paint was mixed with thinner at 10%, 20%, 30%, 40%, and 50% of the paint's volume. Steel plates were used as test specimens, coated via spray method. Adhesion quality was assessed using the “X–Cut Test” and “Cross Cut Tape Test” based on ASTM D3359 Methods A and B and the adhesion tests showed excellent results with a rating 5, indicating no peeling. Drying quality was evaluated using the “Solvent Rub” method according to ASTM D4752-20. Dry tests also have positive results with a rating 5 within 6 to 24 hours. The findings suggest that variations in thinner concentration do not significantly affect adhesion strength or drying time.
Bahasa Indonesia
Paint serves as a coating material that provides aesthetic value, adhesive strength, and protection to surfaces from environmental corrosion. The one of critical aspect is the paint and thinner ratio, which can influence adhesive strength and the performance of protection. This experimental study investigates the effect of varying ratios of epoxy zinc paint (Avantguard 750) and thinner (08450) on adhesion strength and drying rate. Paint was mixed with thinner at 10%, 20%, 30%, 40%, and 50% of the paint's volume. Steel plates were used as test specimens, coated via spray method. Adhesion quality was assessed using the “X–Cut Test” and “Cross Cut Tape Test” based on ASTM D3359 Methods A and B and the adhesion tests showed excellent results with a rating 5, indicating no peeling. Drying quality was evaluated using the “Solvent Rub” method according to ASTM D4752-20. Dry tests also have positive results with a rating 5 within 6 to 24 hours. The findings suggest that variations in thinner concentration do not significantly affect adhesion strength or drying time.
Kata kunci
Jaringan kolaborasi para penulis
7 penulis · 16 tautan kepenulisan bersama
Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.
- Universitas Hang Tuah
- Afiliasi tidak diketahui
- Organisasi berbeda
- Organisasi sama
- Afiliasi tidak diketahui
- Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
| Rekan penulis | Organisasi | Artikel bersama |
|---|---|---|
| Intan Baroroh | Afiliasi tidak diketahui | 1 |
| Muhammad Ridwan Efendy | Afiliasi tidak diketahui | 1 |
| Intan Baroroh | Universitas Hang Tuah | 1 |
| Tri Agung Kristiyono | Universitas Hang Tuah | 1 |
| Muhammad Ridwan Efendy | Universitas Hang Tuah | 1 |
Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.