Melola Discovery

← Melola Discovery

Jurnal

EXPERIMENTAL TESTING OF PLASTIC WELDING PROCESS ON PRE HEATING TREATMENT OF HDPE FISHING SHIP CONSTRUCTION

UJI EKSPERIMENTAL PROSES PLASTIC WELDING TERHADAP PERLAKUAN PRE HEATING KONSTRUKSI HDPE KAPAL IKAN

SENSISTEK:Riset Sains dan Teknologi Kelautan · Vol. ume No. mor (2023) · pp. 1–7

DOI
10.62012/sensistek.v6i1.21578
ISSN
2988-2559, 2623-1506
Published
2023-05-29
Publisher
Departemen Teknik Kelautan Fakultas Teknik Universitas Hasanuddin
Language
id

Abstract

English

Fishing boats have a construction design that generally uses wood materials. The cost of making fishing boats made of wood varies and the value depends on the type of construction design. The difficulty of recovering wood from this plant makes the need for alternative materials. HDPE plastic or polyethylene (PE) and polypropylene (PP) High Density Polyethylene (HDPE) which has good properties, such as corrosion resistance and light weight, is still one of the most widely adopted materials for the realization of an alternative construction. The purpose of this study was to determine and analyze the effect of temperature on pre heating on the HDPE plastic welding process. The method used is an experiment where the specimen is made using HDPE material according to the ASTM D638 standard. The welding process uses temperature variations between 4000 - 4500 C. The results show the highest value of tensile testing at pre heating 450o C is 18.2 MPa while the lowest value at pre heating 410o C is 13.7 MPa, with an average elongation of 136.8mm. This concludes that there is an effect of preheating on the plastic welding process with HDPE material.

Bahasa Indonesia

Kapal-kapal ikan nelayan memiliki desain konstruksi yang umumnya menggunakan bahan material kayu. Biaya pembuatan kapal ikan dengan berbahan kayu bervariasi dan nilai yang tergantung dari jenis desain konstruksinya. Sulitnya recovery kayu dari tumbuhan ini membuat perlu adanya alternatif material. Plastik HDPE atau polietilen (PE) dan polipropilen (PP) High Density Polyethylene (HDPE) memiliki sifatnya yang baik, seperti ketahanan terhadap korosi dan ringan, adalah masih menjadi salah satu material yang paling banyak diadopsi untuk realisasi pada suatu kontruksi alternatif. Tujuan dari penelitian ini untuk mengetahui dan menganalisa pengaruh temperatur pada pre heating terhapap proses pengelasan plastic welding HDPE. Metode yang digunakan adalah eksperimen dimana pembuatan spesimen menggunakan material HDPE sesuai standar ASTM D638. Proses pengelasan menggunakan variasi temperatur antara 4000 – 4500 C. Hasil penelitian menunjukan nilai tertinggi pengujian tarik pada pre heating 450o C sebesar 18,2 MPa sedangkan nilai terendah pada pre heating 410o C sebesar 13,7 MPa, dengan kemuluran rata-rata 136,8mm. Hal ini menyimpulkan adanya pengaruh preheating pada proses pengelasan plastic welding dengan material HDPE.

Keywords

Collaboration network of the authors

12 authors · 27 co-authorship links

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Faiza IjtihadiyahAffiliation unknown1
DM Miranda SinagaAffiliation unknown1
Tiara Oktiani SiregarAffiliation unknown1
Angelina Theresia PasaribuAffiliation unknown1
Pinta MutiaraAffiliation unknown1
Prizka Rismawati ArumAffiliation unknown1
Rochdi WasonoAffiliation unknown1
Ina AlfidayantiAffiliation unknown1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://journal.unhas.ac.id/index.php/SENSISTEK/oai, first harvested 2 Nov 2026, last seen 2 Nov 2026.
Original metadata (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">EXPERIMENTAL TESTING OF PLASTIC WELDING PROCESS ON PRE HEATING TREATMENT OF HDPE FISHING SHIP CONSTRUCTION</dc:title>
	<dc:title xml:lang="id">UJI EKSPERIMENTAL PROSES PLASTIC WELDING TERHADAP PERLAKUAN PRE HEATING KONSTRUKSI HDPE KAPAL IKAN</dc:title>
	<dc:creator xml:lang="en">Khristyson, Samuel Febriary</dc:creator>
	<dc:creator xml:lang="en">Ridwan, Mohammad</dc:creator>
	<dc:creator xml:lang="en">Afrizal, Luthfi</dc:creator>
	<dc:creator xml:lang="en">Wulan, Pawesti</dc:creator>
	<dc:creator xml:lang="id">Khristyson, Samuel Febriary</dc:creator>
	<dc:creator xml:lang="id">Ridwan, Mohammad</dc:creator>
	<dc:creator xml:lang="id">Afrizal, Luthfi</dc:creator>
	<dc:creator xml:lang="id">Wulan, Pawesti</dc:creator>
	<dc:subject xml:lang="id">Kata kunci: Kapal Ikan, HDPE, Plastic Welding, Preheating</dc:subject>
	<dc:description xml:lang="en">Fishing boats have a construction design that generally uses wood materials. The cost of making fishing boats made of wood varies and the value depends on the type of construction design. The difficulty of recovering wood from this plant makes the need for alternative materials. HDPE plastic or polyethylene (PE) and polypropylene (PP) High Density Polyethylene (HDPE) which has good properties, such as corrosion resistance and light weight, is still one of the most widely adopted materials for the realization of an alternative construction. The purpose of this study was to determine and analyze the effect of temperature on pre heating on the HDPE plastic welding process. The method used is an experiment where the specimen is made using HDPE material according to the ASTM D638 standard. The welding process uses temperature variations between 4000 - 4500 C. The results show the highest value of tensile testing at pre heating 450o C is 18.2 MPa while the lowest value at pre heating 410o C is 13.7 MPa, with an average elongation of 136.8mm . This concludes that there is an effect of preheating on the plastic welding process with HDPE material.</dc:description>
	<dc:description xml:lang="id">Kapal-kapal ikan nelayan memiliki desain konstruksi yang umumnya menggunakan bahan material kayu. Biaya pembuatan kapal ikan dengan berbahan kayu bervariasi dan nilai yang tergantung dari jenis desain konstruksinya. Sulitnya recovery kayu dari tumbuhan ini membuat perlu adanya alternatif material . Plastik HDPE atau polietilen (PE) dan polipropilen (PP) High Density Polyethylene (HDPE) memiliki sifatnya yang baik, seperti ketahanan terhadap korosi dan ringan, adalah masih menjadi salah satu material yang paling banyak diadopsi untuk realisasi pada suatu kontruksi alternatif. Tujuan dari penelitian ini untuk mengetahui dan menganalisa pengaruh temperatur pada pre heating terhapap proses pengelasan plastic welding HDPE. Metode yang digunakan adalah eksperimen dimana pembuatan spesimen menggunakan material HDPE sesuai standar ASTM D638. Proses pengelasan menggunakan variasi temperatur antara 4000 – 4500 C. Hasil penelitian menunjukan nilai tertinggi pengujian tarik pada pre heating 450o C sebesar 18,2 MPa sedangkan nilai terendah pada pre heating 410o C sebesar 13,7 MPa, dengan kemuluran rata-rata 136,8mm. Hal ini menyimpulkan adanya pengaruh preheating&amp;nbsp; pada proses pengelasan plastic welding dengan material HDPE .</dc:description>
	<dc:publisher xml:lang="en">Departemen Teknik Kelautan Fakultas Teknik Universitas Hasanuddin</dc:publisher>
	<dc:date>2023-05-29</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unhas.ac.id/index.php/SENSISTEK/article/view/21578</dc:identifier>
	<dc:identifier>10.62012/sensistek.v6i1.21578</dc:identifier>
	<dc:source xml:lang="en">SENSISTEK:Riset Sains dan Teknologi Kelautan; Volume 6, Nomor 1, Tahun 2023; 1-7</dc:source>
	<dc:source xml:lang="id">Riset Sains dan Teknologi Kelautan; Volume 6, Nomor 1, Tahun 2023; 1-7</dc:source>
	<dc:source>2988-2559</dc:source>
	<dc:source>2623-1506</dc:source>
	<dc:language>id</dc:language>
	<dc:relation>https://journal.unhas.ac.id/index.php/SENSISTEK/article/view/21578/10580</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2026 SENSISTEK:Riset Sains dan Teknologi Kelautan</dc:rights>
</oai_dc:dc>