Melola Discovery

← Melola Discovery

Akses terbuka Jurnal Tanpa peringkat SINTA

Comparison of Window Scan and Digital Outcrop Model Approaches for Fracture Characterisation Along the Lampung–Panjang Fault Zone

JURNAL GEOCELEBES · Vol. 10 No. 2 (2026) · hlm. 432–442

DOI
10.70561/geocelebes.v10i2.52858
ISSN
2579-5546, 2579-5821
Terbit
2026-10-26
Penerbit
Departemen Geofisika, FMIPA - Universitas Hasanuddin, Makassar
Bahasa
en
Lisensi
creativecommons.org/licenses/by-nc-sa/4.0

Abstrak

Fracture characterisation is an important component of structural geological studies because fracture orientation and distribution provide insights into tectonic deformation and rock mass behaviour. However, conventional field-based fracture measurements are often constrained by limited outcrop accessibility and observation coverage. This study evaluated the applicability of Digital Outcrop Models generated from unmanned aerial vehicle photogrammetry for fracture characterisation within crystalline rocks along the Lampung–Panjang Fault zone, southern Sumatra, Indonesia. Fracture data were collected from four outcrops using both the window scan method and digital measurements derived from georeferenced three-dimensional outcrop models. The aerial imagery was processed to generate orthomosaics and digital outcrop models, from which fracture traces were identified and analyzed. A total of 124 fractures were measured using the window scan method, whereas 319 fractures were extracted from the digital outcrop models. Results showed that both approaches consistently identified dominant northwest–southeast and northeast–southwest fracture orientations across the study area. Although differences were observed in dip distributions and contour dispersion, the digital outcrop models preserved the principal fracture patterns recognized in the field while providing a larger dataset and broader spatial coverage. These findings demonstrated that digital outcrop models can reliably represent fracture geometries and serve as an effective alternative to conventional measurements, particularly in inaccessible outcrops. The study highlights the potential of drone-based photogrammetry to improve the efficiency and completeness of structural geological mapping and fracture characterisation.

Kata kunci

Jaringan kolaborasi para penulis

15 penulis · 32 tautan kepenulisan bersama · 4 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Sumatera Institute of Technology
  • State University of Semarang
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Angga Jati WidiatamaSumatera Institute of Technology2
Aditya GunawanSumatera Institute of Technology1
Muhammad IrsyadState University of Semarang1
Ahmad Dennil ZainuddinSumatera Institute of Technology1
Nirmawana SimarmataSumatera Institute of Technology1
Zulfikar Adlan NadzirSumatera Institute of Technology1
Bilal Al FarishiSumatera Institute of Technology1
Goldie Melinda WijayantiSumatera Institute of Technology1
Agus SusiloAfiliasi tidak diketahui1
Eko WidodoAfiliasi tidak diketahui1
Osfar SjofjanAfiliasi tidak diketahui1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.unhas.ac.id/index.php/geocelebes/oai, pertama di-harvest 3 Nov 2026, terakhir terlihat 15 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Comparison of Window Scan and Digital Outcrop Model Approaches for Fracture Characterisation Along the Lampung–Panjang Fault Zone</dc:title>
	<dc:creator xml:lang="en">Hendrawan, Rezki Naufan</dc:creator>
	<dc:creator xml:lang="en">Kurniawan, David</dc:creator>
	<dc:creator xml:lang="en">Wijaya, Muhammad Eval Juni</dc:creator>
	<dc:creator xml:lang="en">Siringoringo, Luhut Pardamean</dc:creator>
	<dc:subject xml:lang="en">Fracture Characterisation</dc:subject>
	<dc:subject xml:lang="en">Digital Outcrop Model</dc:subject>
	<dc:subject xml:lang="en">Photogrammetry</dc:subject>
	<dc:subject xml:lang="en">Structural Geology</dc:subject>
	<dc:description xml:lang="en">Fracture characterisation is an important component of structural geological studies because fracture orientation and distribution provide insights into tectonic deformation and rock mass behaviour. However, conventional field-based fracture measurements are often constrained by limited outcrop accessibility and observation coverage. This study evaluated the applicability of Digital Outcrop Models generated from unmanned aerial vehicle photogrammetry for fracture characterisation within crystalline rocks along the Lampung–Panjang Fault zone, southern Sumatra, Indonesia. Fracture data were collected from four outcrops using both the window scan method and digital measurements derived from georeferenced three-dimensional outcrop models. The aerial imagery was processed to generate orthomosaics and digital outcrop models, from which fracture traces were identified and analyzed. A total of 124 fractures were measured using the window scan method, whereas 319 fractures were extracted from the digital outcrop models. Results showed that both approaches consistently identified dominant northwest–southeast and northeast–southwest fracture orientations across the study area. Although differences were observed in dip distributions and contour dispersion, the digital outcrop models preserved the principal fracture patterns recognized in the field while providing a larger dataset and broader spatial coverage. These findings demonstrated that digital outcrop models can reliably represent fracture geometries and serve as an effective alternative to conventional measurements, particularly in inaccessible outcrops. The study highlights the potential of drone-based photogrammetry to improve the efficiency and completeness of structural geological mapping and fracture characterisation.</dc:description>
	<dc:publisher xml:lang="en">Departemen Geofisika, FMIPA - Universitas Hasanuddin, Makassar</dc:publisher>
	<dc:date>2026-10-26</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unhas.ac.id/index.php/geocelebes/article/view/52858</dc:identifier>
	<dc:identifier>10.70561/geocelebes.v10i2.52858</dc:identifier>
	<dc:source xml:lang="en">JURNAL GEOCELEBES; Vol. 10 No. 2: October 2026; 432–442</dc:source>
	<dc:source>2579-5546</dc:source>
	<dc:source>2579-5821</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://journal.unhas.ac.id/index.php/geocelebes/article/view/52858/15171</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2026 JURNAL GEOCELEBES</dc:rights>
	<dc:rights xml:lang="en">https://creativecommons.org/licenses/by-nc-sa/4.0</dc:rights>
</oai_dc:dc>