Melola Discovery

← Melola Discovery

Jurnal SINTA 3

ANALISIS MODULUS ELASTISITAS DAN ANGKA POISSON BAHAN DENGAN UJI TARIK

BAREKENG: Jurnal Ilmu Matematika dan Terapan · Vol. 5 No. 2 (2011) · hlm. 9–14

DOI
10.30598/barekengvol5iss2pp9-14
ISSN
2615-3017, 1978-7227
Terbit
2011-12-01
Penerbit
PATTIMURA UNIVERSITY
Bahasa
eng

Abstrak

Observation of the stress and strain in materials steel, brass and anneal is done by testing to determine the tensile modulus of elasticity of the material. The results showed that the modulus of elasticity of the material brass is smaller than the brass alloy steel and steel materials, caused by the formation of the composition of the material is different. The relationship between stress and strain are used to gain slope value, and this value used to determine the modulus of elasticity of steel materials, brass and anneal. The analysis showed that the magnitude of the modulus of elasticity of brass material brass=(20.10  1.60) x109 Pa, anneal materials anneal=(68.10  2.20) x109 Pa, and steel materials steel=(201, 00  5.30) x109 Pa. The results of tensile tests conducted on all three materials can be used to determine the comparative figures Poisson. The analysis showed the amount of comparative figures in steel material Poisson msteel=0.106  0.002, brass material mbrass=0.104  0.002 and anneal materials manneal=0.103  0.005. Figures Poisson appeal on steel materials is greater than the brass and anneal

Jaringan kolaborasi para penulis

12 penulis · 29 tautan kepenulisan bersama · 2 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Pattimura
  • Bandung Institute of Technology
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Sisca M. SapuleteUniversitas Pattimura2
Lilik HendrajayaBandung Institute of Technology2
Gunawan HandayaniBandung Institute of Technology2
Sisca M. SapuleteAfiliasi tidak diketahui1
Sean O. SouisaAfiliasi tidak diketahui1
Sitti JubaedahUniversitas Pattimura1
Sean O O. SouisaUniversitas Pattimura1
Cici C.N. OhoinerUniversitas Pattimura1
Raras F. WaimalakaUniversitas Pattimura1
Leona Y MataheruillaUniversitas Pattimura1
Sansina L PangelyUniversitas Pattimura1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://ojs3.unpatti.ac.id/index.php/barekeng/oai, pertama di-harvest 5 Nov 2026, terakhir terlihat 15 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">ANALISIS MODULUS ELASTISITAS DAN ANGKA POISSON BAHAN DENGAN UJI TARIK</dc:title>
	<dc:creator>SOUISA, MATHEUS</dc:creator>
	<dc:description xml:lang="en-US">Observation of the stress and strain in materials steel, brass and anneal is done by testing to determine the tensile modulus of elasticity of the material. The results showed that the modulus of elasticity of the material brass is smaller than the brass alloy steel and steel materials, caused by the formation of the composition of the material is different. The relationship between stress and strain are used to gain slope value, and this value used to determine the modulus of elasticity of steel materials, brass and anneal. The analysis showed that the magnitude of the modulus of elasticity of brass material brass=(20.10  1.60) x109 Pa, anneal materials anneal=(68.10  2.20) x109 Pa, and steel materials steel=(201, 00  5.30) x109 Pa. The results of tensile tests conducted on all three materials can be used to determine the comparative figures Poisson. The analysis showed the amount of comparative figures in steel material Poisson msteel=0.106  0.002, brass material mbrass=0.104  0.002 and anneal materials manneal=0.103  0.005. Figures Poisson appeal on steel materials is greater than the brass and anneal</dc:description>
	<dc:publisher xml:lang="en-US">PATTIMURA UNIVERSITY</dc:publisher>
	<dc:date>2011-12-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs3.unpatti.ac.id/index.php/barekeng/article/view/188</dc:identifier>
	<dc:identifier>10.30598/barekengvol5iss2pp9-14</dc:identifier>
	<dc:source xml:lang="en-US">BAREKENG: Jurnal Ilmu Matematika dan Terapan; Vol 5 No 2 (2011): BAREKENG : Jurnal Ilmu Matematika dan Terapan; 9-14</dc:source>
	<dc:source>2615-3017</dc:source>
	<dc:source>1978-7227</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs3.unpatti.ac.id/index.php/barekeng/article/view/188/160</dc:relation>
</oai_dc:dc>