Melola Discovery

← Melola Discovery

Open access Jurnal SINTA 1

Integration of Frequency Dependent Soil Electrical Properties in Grounding Electrode Circuit Model

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 6 No. 2 (2016)

DOI
10.11591/ijece.v6i2.9527
ISSN
2088-8708, 2088-8708
Published
2016-04-01
Publisher
Institute of Advanced Engineering and Science
License
creativecommons.org/licenses/by-nc-nd/4.0

Abstract

The effect of frequency dependent soil properties on the impedance and transient response of the grounding electrode was investigated. The frequency dependent soil models as proposed by Scott, Smith-Longmire, and Visacro-Alipio were critically reviewed. A novel method was proposed to integrate the frequency dependent soil electrical properties in the circuit model of grounding electrode. To validate the application of the method in circuit model, the voltage responses of the grounding electrode obtained by the circuit and electromagnetic models were compared. The voltage responses obtained by the circuit and electromagnetic models were in excellent agreement in terms of voltage peaks and wave shapes. The differences between voltage peaks obtained by the circuit and electromagnetic models were found less than 1%.

Collaboration network of the authors

17 authors · 67 co-authorship links · 34 across different organisations

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • University of Technology Malaysia
  • Robert Gordon University
  • Jubail Industrial College
  • University of Kuala Lumpur
  • Universidad Técnica Federico Santa María
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Noor Azlinda AhmadUniversity of Technology Malaysia6
Behnam SalimiUniversity of Technology Malaysia6
Ali I ElgayarUniversity of Technology Malaysia2
Ali I. El GayarAffiliation unknown2
Nurul Aini BaniUniversity of Technology Malaysia1
Firdaus Muhammad‐SukkiRobert Gordon University1
Abdullahi Abubakar Mas’udJubail Industrial College1
Mohd Nabil MuhtazaruddinUniversity of Technology Malaysia1
Siti Hawa Abu-BakarUniversity of Kuala Lumpur1
Siti Armiza Mohd ArisUniversity of Technology Malaysia1
Siti Zura A. JalilUniversity of Technology Malaysia1
Hazilah Mad KaidiUniversity of Technology Malaysia1
Sharipah Alwiah Syed Abd RahamanUniversity of Technology Malaysia1
Jorge Alfredo Ardila ReyUniversidad Técnica Federico Santa María1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

This record comes from Crossref (what the publisher deposited), because the journal's own OAI-PMH endpoint could not be harvested.

Metadata source: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, first harvested 27 Okt 2026, last seen 27 Okt 2026.
Metadata as oai_dc, converted from Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>Integration of Frequency Dependent Soil Electrical Properties in Grounding Electrode Circuit Model</dc:title><dc:creator>Mokhtari, Mehrdad</dc:creator><dc:creator>Abdul-Malek, Zulkurnain</dc:creator><dc:creator>Wooi, Chin Leong</dc:creator><dc:description>&lt;jats:p&gt;&amp;lt;span&amp;gt;The effect of frequency dependent soil properties on the impedance and transient response of the grounding electrode was investigated. The frequency dependent soil models as proposed by Scott, Smith-Longmire, and Visacro-Alipio were critically reviewed. A novel method was proposed to integrate the frequency dependent soil electrical properties in the circuit model of grounding electrode. To validate the application of the method in circuit model, the voltage responses of the grounding electrode obtained by the circuit and electromagnetic models were compared. The voltage responses obtained by the circuit and electromagnetic models were in excellent agreement in terms of voltage peaks and wave shapes. The differences between voltage peaks obtained by the circuit and electromagnetic models were found less than 1%.&amp;lt;/span&amp;gt;&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2016-04-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v6i2.9527</dc:identifier><dc:identifier>10.11591/ijece.v6i2.9527</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 6 No 2 (2016); 792</dc:source><dc:source>2088-8708</dc:source><dc:source>2088-8708</dc:source><dc:relation>http://www.iaescore.com/journals/index.php/IJECE/article/viewFile/161/177</dc:relation><dc:rights>http://creativecommons.org/licenses/by-nc-nd/4.0</dc:rights></oai_dc:dc>