Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Design Of A Nonvolatile 8T1R SRAM Cell For Instant-On Operation

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 6 No. 3 (2016)

DOI
10.11591/ijece.v6i3.9448
ISSN
2088-8708, 2088-8708
Terbit
2016-06-01
Penerbit
Institute of Advanced Engineering and Science
Lisensi
creativecommons.org/licenses/by-nc-nd/4.0

Abstrak

Now-a-days, Energy consumption is the major key factor in Memories. By switching the circuit in off mode and with an lower voltages, leads to decrease in an power dissipation of the circuit. Compared to DRAM SRAM’S are mostly used because of their data retaining capability. The major advantage of using SRAM’s rather than DRAM’S is that, they are providing fast power-on/off speeds. Hence SRAM’s are more preferred over DRAM’s for better instant-on operation. Generally SRAM’s are classified in to two types namely volatile and non-volatile SRAM’s. A non-volatile SRAM enables chip to achieve performance factors and also provides an restore operation which will be enabled by an restore signal to restore the data and also power-up operation is performed. This paper describes about novel NVSRAM circuit which produces better “instant-on operation” compared to previous techniques used in SRAM’s. In addition to normal 6T SRAM core, we are using RRAM circuitry (Resistive RAM) to provide better instant-on operation. By comparing the performance factors with 8T2R and 9T2R, 8T1R design performs the best in the Nano meter scale. Thus this paper provides better performances in power, energy, propagation delay and area factors as compared with other designs.

Jaringan kolaborasi para penulis

2 penulis · 1 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Data ini berasal dari Crossref (yang disetorkan penerbit), karena endpoint OAI-PMH milik jurnal tidak dapat di-harvest.

Sumber metadata: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, pertama di-harvest 27 Okt 2026, terakhir terlihat 15 Nov 2026.
Metadata sebagai oai_dc, dikonversi dari Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>Design Of A Nonvolatile 8T1R SRAM Cell For Instant-On Operation</dc:title><dc:creator>Mounica, J.</dc:creator><dc:creator>Ganesh, G.V.</dc:creator><dc:description>&lt;jats:p&gt;Now-a-days, Energy consumption is the major key factor in Memories. By switching the circuit in off mode and with an lower voltages, leads to decrease in an power dissipation of the circuit. Compared to DRAM SRAM’S are mostly used because of their data retaining capability. The major advantage of using SRAM’s rather than DRAM’S is that, they are providing fast power-on/off speeds. Hence SRAM’s are more preferred over DRAM’s for better instant-on operation. Generally SRAM’s are classified in to two types namely volatile and non-volatile SRAM’s. A non-volatile SRAM enables chip to achieve performance factors and also provides an restore operation which will be enabled by an restore signal to restore the data and also power-up operation is performed. This paper describes about novel NVSRAM circuit which produces better “instant-on operation” compared to previous techniques used in SRAM’s. In addition to normal 6T SRAM core, we are using RRAM circuitry (Resistive RAM) to provide better instant-on operation. By comparing the performance factors with 8T2R and 9T2R, 8T1R design performs the best in the Nano meter scale. Thus this paper provides better performances in power, energy, propagation delay and area factors as compared with other designs.&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2016-06-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v6i3.9448</dc:identifier><dc:identifier>10.11591/ijece.v6i3.9448</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 6 No 3 (2016); 1183</dc:source><dc:source>2088-8708</dc:source><dc:source>2088-8708</dc:source><dc:relation>http://www.iaescore.com/journals/index.php/IJECE/article/viewFile/474/348</dc:relation><dc:rights>http://creativecommons.org/licenses/by-nc-nd/4.0</dc:rights></oai_dc:dc>