The Cutting Stock Problem (CSP) is a common challenge in many industries, involving the optimization of material cutting to minimize waste while meeting customer demands. Various methods can be used to address this issue. This paper applies the heuristic Particle Swarm Optimization (PSO) method to solve CSP in the case of one-dimensional aluminum roll cutting. First, we identify feasible cutting pattern combinations. A mathematical model and constraints are then formulated based on these patterns. Next, the PSO algorithm is employed to determine the optimal combination of cutting patterns, minimizing material waste. The results yield the optimal aluminum roller cutting pattern. Furthermore, we compare the results between the PSO method and the exact method.
Jaringan kolaborasi para penulis
18 penulis ·
33 tautan kepenulisan bersama
· 2 lintas organisasi
Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.
IPB University
University of National Education
Afiliasi tidak diketahui
Organisasi berbeda
Organisasi sama
Afiliasi tidak diketahui
Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.