Melola Discovery

← Melola Discovery

Akses terbuka Jurnal

STUDY OF 3D PRINTING HIPS BREAST PHANTOM MATERIAL: EFFECT OF EXPOSURE VOLTAGE VARIATION AND NODULE SIZE

Jurnal Ilmiah Ilmu Terapan Universitas Jambi · Vol. 9 No. 3 (2025) · hlm. 924–940

DOI
10.22437/jiituj.v9i3.42846
ISSN
2580-2259, 2580-2240
Terbit
2025-07-02
Penerbit
LPPM Universitas Jambi
Bahasa
en
Lisensi
creativecommons.org/licenses/by/4.0

Abstrak

A study has examined the characteristics of 3D printer materials of HIPS and PLA. The study began by printing HIPS materials that resembled breast organs and PLA materials that resembled breast cancer nodules. Then it exposed them using a CT scan with voltage variations of 80 kV, 100 kV, and 120 kV. The parameters studied were compared with the reference breast organ. The results obtained at these voltages obtained CT-number values sequentially (-85.14+0.25); (-64.79+0.21) HU; (-55.08+0.18) HU values from the reference 35 to -94 HU, relative electron density values sequentially 0.915; 0.935; 0.945 with a reference value of 0.950, the density value of the material obtained is (0.921+0.002) g/, The EDG value is 3.24 x from ICRU 1989 was 3.33 x, The EDV value is (3.00 + 0.01) x from ICRU report 44 was 3.18 x 10, the value is 3.50 the value of ICRU data is 3.28, and the effective dose values are respectively 2.53 mSv, 2.83 mSv, 3.20 mSv. Based on these characteristics, the results indicate that the breast phantom matches the characteristics of the breast organ, allowing it to be used to predict the presence of breast cancer, as it shares the same characteristics. The results of exposure to the lung cancer nodule phantom on the CT-Scan image of the 2 mm nodule size are not visible. The results of this study can be used as a consideration for radiologists when choosing a voltage based on the predicted size of the breast cancer nodule.

Kata kunci

Jaringan kolaborasi para penulis

30 penulis · 86 tautan kepenulisan bersama · 3 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Sebelas Maret University
  • Diponegoro University
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Soeparmi SoeparmiSebelas Maret University3
Cari CariSebelas Maret University3
Sorja KoesumaSebelas Maret University2
Delta Nur SeptianingsihSebelas Maret University2
Tonang Dwi ArdyantoSebelas Maret University2
Resta Farits PradanaSebelas Maret University2
C. CariSebelas Maret University2
Hardo Ardiansyah Gilang PermadiSebelas Maret University2
Lukmaniyah Rizky AmaliaSebelas Maret University1
Suharno SuharnoSebelas Maret University1
Utari UtariAfiliasi tidak diketahui1
Nanang WiyonoSebelas Maret University1
Budi PurnamaSebelas Maret University1
Riyatun RiyatunSebelas Maret University1
Yusuf Anggara AjiSebelas Maret University1
Nuryani NuryaniSebelas Maret University1
Dwi Teguh RaharjoSebelas Maret University1
Egyn Furqon GhozaliSebelas Maret University1
N NuryaniSebelas Maret University1
Aisyah Ajibah RahmahSebelas Maret University1
Esti SuryaniSebelas Maret University1
Rizka Dewi MeilinaSebelas Maret University1
Ahmad MarzukiSebelas Maret University1
Arrini Nurul MAfiliasi tidak diketahui1
Hastho WuriatmoAfiliasi tidak diketahui1
Jarot PurnomoAfiliasi tidak diketahui1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://online-journal.unja.ac.id/index.php/JIITUJ/oai, pertama di-harvest 5 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">STUDY OF 3D PRINTING HIPS BREAST PHANTOM MATERIAL: EFFECT OF EXPOSURE VOLTAGE VARIATION AND NODULE SIZE</dc:title>
	<dc:creator xml:lang="en">Yunianto, Mohtar</dc:creator>
	<dc:creator xml:lang="en">Devi, Nanda Astika</dc:creator>
	<dc:creator xml:lang="en">Anwar, Fuad</dc:creator>
	<dc:creator xml:lang="en">Cindyana, Adnan</dc:creator>
	<dc:subject xml:lang="en">3D Printer</dc:subject>
	<dc:subject xml:lang="en">Breast Phantom</dc:subject>
	<dc:subject xml:lang="en">CT-Number</dc:subject>
	<dc:subject xml:lang="en">CT-Scan</dc:subject>
	<dc:subject xml:lang="en">HIPS</dc:subject>
	<dc:subject xml:lang="en">PLA</dc:subject>
	<dc:description xml:lang="en">A study has examined the characteristics of 3D printer materials of HIPS and PLA. The study began by printing HIPS materials that resembled breast organs and PLA materials that resembled breast cancer nodules. Then it exposed them using a CT scan with voltage variations of 80 kV, 100 kV, and 120 kV. The parameters studied were compared with the reference breast organ. The results obtained at these voltages obtained CT-number values sequentially (-85.14+0.25) ; (-64.79+0.21) HU; (-55.08+0.18) HU values from the reference 35 to -94 HU, relative electron density values sequentially 0.915; 0.935; 0.945 with a reference value of 0.950, the density value of the material obtained is (0.921+0.002) g/, The EDG value is 3.24 x  from ICRU 1989 was 3.33 x, The EDV value is (3.00 + 0.01) x  from ICRU report 44 was 3.18 x 10, the value is 3.50 the value of ICRU data is 3.28, and the effective dose values are respectively 2.53 mSv, 2.83 mSv, 3.20 mSv. Based on these characteristics, the results indicate that the breast phantom matches the characteristics of the breast organ, allowing it to be used to predict the presence of breast cancer, as it shares the same characteristics. The results of exposure to the lung cancer nodule phantom on the CT-Scan image of the 2 mm nodule size are not visible. The results of this study can be used as a consideration for radiologists when choosing a voltage based on the predicted size of the breast cancer nodule.</dc:description>
	<dc:publisher xml:lang="en">LPPM Universitas Jambi</dc:publisher>
	<dc:date>2025-07-02</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://online-journal.unja.ac.id/JIITUJ/article/view/42846</dc:identifier>
	<dc:identifier>10.22437/jiituj.v9i3.42846</dc:identifier>
	<dc:source xml:lang="en">Jurnal Ilmiah Ilmu Terapan Universitas Jambi; Vol. 9 No. 3 (2025): Volume 9, Nomor 3, September 2025; 924-940</dc:source>
	<dc:source>2580-2259</dc:source>
	<dc:source>2580-2240</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://online-journal.unja.ac.id/JIITUJ/article/view/42846/21403</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2025 Mohtar Yunianto, Nanda Astika Devi, Fuad Anwar, Adnan Cindyana</dc:rights>
	<dc:rights xml:lang="en">https://creativecommons.org/licenses/by/4.0</dc:rights>
</oai_dc:dc>