Melola Discovery

← Melola Discovery

Akses terbuka Jurnal

CHARACTERISTICS OF AIRBORNE MICROPLASTIC POLYMERS USING PASSIVE SAMPLING AND THE INFLUENCE OF METEOROLOGICAL CONDITIONS

Jurnal Ilmiah Ilmu Terapan Universitas Jambi · Vol. 10 No. 2 (2026) · hlm. 593–606

DOI
10.22437/jiituj.v10i2.48104
ISSN
2580-2259, 2580-2240
Terbit
2026-04-29
Penerbit
LPPM Universitas Jambi
Bahasa
en
Lisensi
creativecommons.org/licenses/by/4.0

Abstrak

Tenayan Industrial Estate has various anthropogenic activities, including industrial and population-related activities. Many activities can affect the levels of pollutants in the air, including microplastics. Microplastics can be transported through the air by meteorological factors. This research examined the abundance of microplastic particles in ambient air around the Tenayan Industrial Estate, focusing on the types and kinds of microplastic polymers. The air sampling method employed was passive sampling, conducted at three locations: upwind, downwind, and center, carried out every 7 days for 28 days. Microscopical method to determine the amount of abundance, the classification of microplastic polymer types and types. Differential Scanning Calorimetry (DSC) tests were conducted to determine the type of plastic. The research results show that the upwind point has an average weekly microplastic abundance of 64.00 ± 39.53 particles/liter. The central point is the average abundance of 69,5 ± 31,38 particles/liter. The downwind point has the highest average microplastic abundance of 81 ± 60,86 particles/liter. The dominant form of microplastics is fiber, accounting for 60,7%. The Microplastic polymer types identified are polyvinyl chloride, polycarbonate, and polyamide. The results showed that microplastic abundance was influenced by meteorological factors, specifically wind speed. Downwind locations, which are residential areas, have the highest microplastic abundance, indicating accumulation rather than directional transport.

Kata kunci

Jaringan kolaborasi para penulis

3 penulis · 3 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Riau University
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://online-journal.unja.ac.id/index.php/JIITUJ/oai, pertama di-harvest 5 Nov 2026, terakhir terlihat 15 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">CHARACTERISTICS OF AIRBORNE MICROPLASTIC POLYMERS USING PASSIVE SAMPLING AND THE INFLUENCE OF METEOROLOGICAL CONDITIONS</dc:title>
	<dc:creator xml:lang="en">Sasmita, Aryo</dc:creator>
	<dc:creator xml:lang="en">Priyambada, Gunadi</dc:creator>
	<dc:creator xml:lang="en">Ikhsandi, Ahmad</dc:creator>
	<dc:subject xml:lang="en">Abundance</dc:subject>
	<dc:subject xml:lang="en">Industrial Area</dc:subject>
	<dc:subject xml:lang="en">Microplastics</dc:subject>
	<dc:subject xml:lang="en">Passive Sampling</dc:subject>
	<dc:description xml:lang="en">Tenayan Industrial Estate has various anthropogenic activities, including industrial and population-related activities. Many activities can affect the levels of pollutants in the air, including microplastics. Microplastics can be transported through the air by meteorological factors. This research examined the abundance of microplastic particles in ambient air around the Tenayan Industrial Estate, focusing on the types and kinds of microplastic polymers. The air sampling method employed was passive sampling, conducted at three locations: upwind, downwind, and center, carried out every 7 days for 28 days. Microscopical method to determine the amount of abundance, the classification of microplastic polymer types and types. Differential Scanning Calorimetry (DSC) tests were conducted to determine the type of plastic. The research results show that the upwind point has an average weekly microplastic abundance of 64.00 ± 39.53 particles/liter. The central point is the average abundance of 69,5 ± 31,38 particles/liter. The downwind point has the highest average microplastic abundance of 81 ± 60,86 particles/liter. The dominant form of microplastics is fiber, accounting for 60,7%. The Microplastic polymer types identified are polyvinyl chloride, polycarbonate, and polyamide. The results showed that microplastic abundance was influenced by meteorological factors, specifically wind speed. Downwind locations, which are residential areas, have the highest microplastic abundance, indicating accumulation rather than directional transport.</dc:description>
	<dc:publisher xml:lang="en">LPPM Universitas Jambi</dc:publisher>
	<dc:date>2026-04-29</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://online-journal.unja.ac.id/JIITUJ/article/view/48104</dc:identifier>
	<dc:identifier>10.22437/jiituj.v10i2.48104</dc:identifier>
	<dc:source xml:lang="en">Jurnal Ilmiah Ilmu Terapan Universitas Jambi; Vol. 10 No. 2 (2026): Volume 10, Nomor 2, April 2026; 593-606</dc:source>
	<dc:source>2580-2259</dc:source>
	<dc:source>2580-2240</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://online-journal.unja.ac.id/JIITUJ/article/view/48104/24112</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2026 Aryo Sasmita, Gunadi Priyambada, Ahmad Ikhsandi</dc:rights>
	<dc:rights xml:lang="en">https://creativecommons.org/licenses/by/4.0</dc:rights>
</oai_dc:dc>