Melola Discovery

← Melola Discovery

Open access Jurnal SINTA 1

Power-Flow Development Based on the Modified Backward-Forward for Voltage Profile Improvement of Distribution System

International Journal of Electrical and Computer Engineering (IJECE) · Vol. 6 No. 5 (2016)

DOI
10.11591/ijece.v6i5.10648
ISSN
2088-8708, 2088-8708
Published
2016-10-01
Publisher
Institute of Advanced Engineering and Science
License
creativecommons.org/licenses/by-nc-nd/4.0

Abstract

Unbalanced three-phase radial distribution system has a complex problem in power system. It has many branches and it is sometimes voltage profile’s not stable at every end branches. For improvement of voltage profile, it can be performed by penetrating of a distributed generation models. Information of voltage profile can be gained by study of power flow. The Modified Backward-Forward is one of the most widely used methods of development of power flow and has been extensively used for voltage profile analysis. In this paper, a study of power flow based on the Modified Backward-Forward method was used to capture the complexities of unbalanced three phase radial distribution system in the 20 kV distribution network in North Surabaya city, East Java, Indonesia within considering distributed generation models. In summary, for the informants in this study, the Modified Backward-Forward method has had quickly convergence and it’s just needed 3 to 5 iteration of power flow simulation which’s compared to other power flow development methods. Distributed Generation models in the modified the modified 34 BUS IEEE system and 20 kV distribution network has gained voltage profile value on limited range. One of the more significant findings to emerge from this development is that the Modified Backward-Forward method has average of error voltage about 0.0017 % to 0.1749%.

Collaboration network of the authors

25 authors · 68 co-authorship links · 24 across different organisations

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Institut Teknologi Sepuluh Nopember
  • Politeknik Negeri Ujung Pandang
  • Universitas Bhayangkara Surabaya
  • Politeknik Bosowa
  • State University of Makassar
  • Institut Teknologi Telkom Surabaya
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Rony Seto WibowoInstitut Teknologi Sepuluh Nopember2
Muhira Dzar FarabyPoliteknik Negeri Ujung Pandang2
Ni Ketut AryaniInstitut Teknologi Sepuluh Nopember2
Amirullah AmirullahUniversitas Bhayangkara Surabaya2
I Made Yulistya NegaraInstitut Teknologi Sepuluh Nopember1
Mat Syai’inInstitut Teknologi Sepuluh Nopember1
Suhartono SuhartonoInstitut Teknologi Sepuluh Nopember1
Ismit MadoInstitut Teknologi Sepuluh Nopember1
Andi FitriatiPoliteknik Bosowa1
Muhammad Daffa CahyonoputraInstitut Teknologi Sepuluh Nopember1
Dimas Fajar Uman PutraInstitut Teknologi Sepuluh Nopember1
Sofyan SofyanPoliteknik Negeri Ujung Pandang1
Akhyar MuchtarState University of Makassar1
Rezi DelfiantiInstitut Teknologi Sepuluh Nopember1
Bima MustaqimInstitut Teknologi Sepuluh Nopember1
Fauzan NusyuraInstitut Teknologi Telkom Surabaya1
Ardyono PriyadiInstitut Teknologi Sepuluh Nopember1
Imam AbadiInstitut Teknologi Sepuluh Nopember1
Mario Dwi PrasetyoInstitut Teknologi Sepuluh Nopember1
Marcel Nicky AriantoInstitut Teknologi Sepuluh Nopember1
Aulia Amjad LutfiInstitut Teknologi Sepuluh Nopember1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

This record comes from Crossref (what the publisher deposited), because the journal's own OAI-PMH endpoint could not be harvested.

Metadata source: Crossref API (cadangan, berdasarkan ISSN) https://api.crossref.org/journals/2088-8708/works, first harvested 27 Okt 2026, last seen 27 Okt 2026.
Metadata as oai_dc, converted from Crossref
<oai_dc:dc xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/"><dc:title>Power-Flow Development Based on the Modified Backward-Forward for Voltage Profile Improvement of Distribution System</dc:title><dc:creator>Suyanto, Suyanto</dc:creator><dc:creator>Rahmadhani, Citra</dc:creator><dc:creator>Penangsang, Ontoseno</dc:creator><dc:creator>Soeprijanto, Adi</dc:creator><dc:description>&lt;jats:p&gt;&amp;lt;p&amp;gt;Unbalanced three-phase radial distribution system has a complex problem in power system. It has many branches and it is sometimes voltage profile’s not stable at every end branches. For improvement of voltage profile, it can be performed by penetrating of a distributed generation models. Information of voltage profile can be gained by study of power flow.  The Modified Backward-Forward is one of the most widely used methods of development of power flow and has been extensively used for voltage profile analysis. In this paper, a study of power flow based on the Modified Backward-Forward method was used to capture the complexities of unbalanced three phase radial distribution system in the 20 kV distribution network in North Surabaya city, East Java, Indonesia within considering distributed generation models. In summary, for the informants in this study, the Modified Backward-Forward method has had quickly convergence and it’s just needed 3 to 5 iteration of power flow simulation which’s compared to other power flow development methods. Distributed Generation models in the modified the modified 34 BUS IEEE system and 20 kV distribution network has gained voltage profile value on limited range. One of the more significant findings to emerge from this development is that the Modified Backward-Forward method has average of error voltage about 0.0017 % to 0.1749%.&amp;lt;/p&amp;gt;&lt;/jats:p&gt;</dc:description><dc:publisher>Institute of Advanced Engineering and Science</dc:publisher><dc:date>2016-10-01</dc:date><dc:type>info:eu-repo/semantics/article</dc:type><dc:format>application/pdf</dc:format><dc:identifier>https://doi.org/10.11591/ijece.v6i5.10648</dc:identifier><dc:identifier>10.11591/ijece.v6i5.10648</dc:identifier><dc:source>International Journal of Electrical and Computer Engineering (IJECE); Vol 6 No 5 (2016); 2005</dc:source><dc:source>2088-8708</dc:source><dc:source>2088-8708</dc:source><dc:relation>http://www.iaescore.com/journals/index.php/IJECE/article/viewFile/1125/4112</dc:relation><dc:rights>http://creativecommons.org/licenses/by-nc-nd/4.0</dc:rights></oai_dc:dc>