Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

AN INTEGRATED SEVEN QUALITY TOOLS AND 5W+1H QUALITY CONTROL MODEL FOR IMPROVING BOTTLED DRINKING WATER PRODUCTION EFFECTIVENESS

Jurnal Ilmiah Ilmu Terapan Universitas Jambi · Vol. 10 No. 3 (2026) · hlm. 1493–1510

DOI
10.22437/jiituj.v10i3.56451
ISSN
2580-2259, 2580-2240
Terbit
2026-06-30
Penerbit
LPPM Universitas Jambi
Bahasa
en
Lisensi
creativecommons.org/licenses/by/4.0

Abstrak

Product quality is a critical factor in improving competitiveness and operational performance in the bottled drinking water industry. This study aimed to develop a quality control model for 285 mL bottled drinking water production using the Seven Quality Tools approach to improve production effectiveness. This research employed a quantitative descriptive case study design. Quality data collected during the production period of January–July 2025 were analyzed using the Seven Quality Tools, including Check Sheet, Stratification, Pareto Diagram, Histogram, Scatter Diagram, Control Chart, and Fishbone Diagram. Improvement strategies were then formulated using the 5W+1H approach. The production volume reached 1,950,000 bottles, with 12,338 defective products, corresponding to a defect rate of 0.63%. The dominant defects consisted of dented bottles (43.35%), insufficient filling volume (31.22%), and folded bottle caps (25.43%). Pareto analysis identified dented bottles as the primary defect requiring immediate corrective action. Fishbone analysis indicated that the major root causes were associated with machine conditions, material handling, operational methods, and human factors. The findings demonstrate that integrating the Seven Quality Tools with the 5W+1H approach provides an effective framework for identifying defect priorities, analyzing root causes, and formulating corrective actions. The proposed quality control model emphasizes preventive maintenance, standard operating procedure standardization, continuous process monitoring, and operator competency development. This model supports continuous quality improvement by reducing defects, improving process stability, and enhancing production effectiveness, while offering a practical reference for quality management implementation in the bottled drinking water manufacturing industry.

Kata kunci

Jaringan kolaborasi para penulis

9 penulis · 18 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Institut Teknologi Minaesa
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Sonny WantouwInstitut Teknologi Minaesa2
Ronald Yusak BokaInstitut Teknologi Minaesa1
Steiva Amerlien Sandra WowilingInstitut Teknologi Minaesa1
Altje Ester PoliInstitut Teknologi Minaesa1
Sarina Julien BintiInstitut Teknologi Minaesa1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://online-journal.unja.ac.id/index.php/JIITUJ/oai, pertama di-harvest 5 Nov 2026, terakhir terlihat 15 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">AN INTEGRATED SEVEN QUALITY TOOLS AND 5W+1H QUALITY CONTROL MODEL FOR IMPROVING BOTTLED DRINKING WATER PRODUCTION EFFECTIVENESS</dc:title>
	<dc:creator xml:lang="en">Turang, Frangky</dc:creator>
	<dc:creator xml:lang="en">Najoan, Harvard Kaunang</dc:creator>
	<dc:creator xml:lang="en">Liow, Festus Evly</dc:creator>
	<dc:creator xml:lang="en">Sokuma, Darman</dc:creator>
	<dc:subject xml:lang="en">Bottled Drinking Water</dc:subject>
	<dc:subject xml:lang="en">Manufacturing Quality Management</dc:subject>
	<dc:subject xml:lang="en">Production Effectiveness</dc:subject>
	<dc:subject xml:lang="en">Quality Control</dc:subject>
	<dc:subject xml:lang="en">Seven Quality Tools</dc:subject>
	<dc:description xml:lang="en">Product quality is a critical factor in improving competitiveness and operational performance in the bottled drinking water industry. This study aimed to develop a quality control model for 285 mL bottled drinking water production using the Seven Quality Tools approach to improve production effectiveness. This research employed a quantitative descriptive case study design. Quality data collected during the production period of January–July 2025 were analyzed using the Seven Quality Tools, including Check Sheet, Stratification, Pareto Diagram, Histogram, Scatter Diagram, Control Chart, and Fishbone Diagram. Improvement strategies were then formulated using the 5W+1H approach. The production volume reached 1,950,000 bottles, with 12,338 defective products, corresponding to a defect rate of 0.63%. The dominant defects consisted of dented bottles (43.35%), insufficient filling volume (31.22%), and folded bottle caps (25.43%). Pareto analysis identified dented bottles as the primary defect requiring immediate corrective action. Fishbone analysis indicated that the major root causes were associated with machine conditions, material handling, operational methods, and human factors. The findings demonstrate that integrating the Seven Quality Tools with the 5W+1H approach provides an effective framework for identifying defect priorities, analyzing root causes, and formulating corrective actions. The proposed quality control model emphasizes preventive maintenance, standard operating procedure standardization, continuous process monitoring, and operator competency development. This model supports continuous quality improvement by reducing defects, improving process stability, and enhancing production effectiveness, while offering a practical reference for quality management implementation in the bottled drinking water manufacturing industry.</dc:description>
	<dc:publisher xml:lang="en">LPPM Universitas Jambi</dc:publisher>
	<dc:date>2026-06-30</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://online-journal.unja.ac.id/JIITUJ/article/view/56451</dc:identifier>
	<dc:identifier>10.22437/jiituj.v10i3.56451</dc:identifier>
	<dc:source xml:lang="en">Jurnal Ilmiah Ilmu Terapan Universitas Jambi; Vol. 10 No. 3 (2026): Volume 10, Nomor 3, June 2026; 1493-1510</dc:source>
	<dc:source>2580-2259</dc:source>
	<dc:source>2580-2240</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://online-journal.unja.ac.id/JIITUJ/article/view/56451/24667</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2026 Frangky Turang, Harvard Kaunang Najoan, Festus Evly Liow, Darman Sokuma</dc:rights>
	<dc:rights xml:lang="en">https://creativecommons.org/licenses/by/4.0</dc:rights>
</oai_dc:dc>