Melola Discovery

← Melola Discovery

Akses terbuka Jurnal Tanpa peringkat SINTA

Statistical Process Control And Capability Analysis of Mechanical Component Dimensions with Operator Factor

Jurnal Matematika, Statistika dan Komputasi · Vol. 22 No. 3 (2026) · hlm. 781–794

DOI
10.20956/j.v22i3.50388
ISSN
2614-8811, 1858-1382
Terbit
2026-05-14
Penerbit
Department of Mathematics, Hasanuddin University
Bahasa
en
Lisensi
creativecommons.org/licenses/by/4.0

Abstrak

Statistical quality control (SQC) is a fundamental approach in modern manufacturing for ensuring that production processes consistently conform to specified quality requirements. This study applies an integrated SQC framework comprising the Xbar-R control chart, one-way analysis of variance (ANOVA), and process capability analysis to evaluate the dimensional quality of mechanical components sourced from an open manufacturing dataset publicly available on Kaggle (Parts Manufacturing Industry Dataset). Three critical dimensions were examined: length, width, and height, each measured by 20 operators with five replicates per operator (n = 100 per dimension). Prior to control charting, data normality was verified through probability plots based on the Anderson-Darling statistic. The Xbar-R analysis revealed out-of-control signals for the length dimension at subgroups 3 and 5, and for width at subgroup 3, indicating the presence of assignable (special) causes of variation. One-way ANOVA demonstrated that inter-operator effects on width were statistically non-significant (F = 1.34, p = 0.185), whereas significant operator-to-operator differences were detected for length (F = 2.10, p = 0.012). Process capability indices showed that all three dimensions fell below the minimum acceptable threshold of Cp ≥ 1.33, with length being most critical (Cp = 0.84, Cpk = 0.71). The findings underscore the necessity of targeted corrective actions including measurement system standardisation, operator retraining, and process variability reduction.

Kata kunci

Jaringan kolaborasi para penulis

2 penulis · 1 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • State University of Medan
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.unhas.ac.id/index.php/jmsk/oai, pertama di-harvest 5 Nov 2026, terakhir terlihat 15 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Statistical Process Control And Capability Analysis of Mechanical Component Dimensions with Operator Factor</dc:title>
	<dc:creator xml:lang="en">Tambunan, Angelica Carolina</dc:creator>
	<dc:creator xml:lang="en">Situmoran, Rut Remita Assianna g</dc:creator>
	<dc:subject xml:lang="en">Statistical Quality Control</dc:subject>
	<dc:subject xml:lang="en">X̄-R control chart</dc:subject>
	<dc:subject xml:lang="en">one-way ANOVA</dc:subject>
	<dc:subject xml:lang="en">,process capability index</dc:subject>
	<dc:subject xml:lang="en">dimensional measurement</dc:subject>
	<dc:description xml:lang="en">Statistical quality control (SQC) is a fundamental approach in modern manufacturing for ensuring that  production processes consistently conform to specified quality requirements. This study applies an integrated SQC framework comprising the Xbar-R control chart, one-way analysis of variance (ANOVA), and process capability analysis to evaluate the dimensional quality of mechanical components sourced from an open manufacturing dataset publicly available on Kaggle (Parts Manufacturing Industry Dataset). Three critical dimensions were examined: length, width, and height, each measured by 20 operators with five replicates per operator (n = 100 per dimension). Prior to control charting, data normality was verified through probability plots based on the Anderson-Darling statistic. The Xbar-R analysis revealed out-of-control signals for the length dimension at subgroups 3 and 5, and for width at subgroup 3, indicating the presence of assignable (special) causes of variation. One-way ANOVA demonstrated that inter-operator effects on width were statistically non-significant (F = 1.34, p = 0.185), whereas significant operator-to-operator differences were detected for length (F = 2.10, p = 0.012). Process capability indices showed that all three dimensions fell below the minimum acceptable threshold of Cp ≥ 1.33, with length being most critical (Cp = 0.84, Cpk = 0.71). The findings underscore the necessity of targeted corrective actions including measurement system standardisation, operator retraining, and process variability reduction.
 </dc:description>
	<dc:publisher xml:lang="en">Department of Mathematics, Hasanuddin University</dc:publisher>
	<dc:date>2026-05-14</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unhas.ac.id/index.php/jmsk/article/view/50388</dc:identifier>
	<dc:identifier>10.20956/j.v22i3.50388</dc:identifier>
	<dc:source xml:lang="en">Jurnal Matematika, Statistika dan Komputasi; Vol. 22 No. 3 (2026): May 2026; 781-794</dc:source>
	<dc:source>2614-8811</dc:source>
	<dc:source>1858-1382</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://journal.unhas.ac.id/index.php/jmsk/article/view/50388/14426</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2026 Jurnal Matematika, Statistika dan Komputasi</dc:rights>
	<dc:rights xml:lang="en">https://creativecommons.org/licenses/by/4.0</dc:rights>
</oai_dc:dc>