Melola Discovery

← Melola Discovery

Jurnal

PERANCANGAN SEQUENCE PENAMBANGAN BATUBARA UNTUK MEMENUHI TARGET PRODUKSI BULANAN

Jurnal Penelitian Geosains · Vol. 10 No. 2 (2016)

ISSN
1858-3636
Published
2016-07-25
Publisher
Departemen Teknik Geologi
Language
en

Abstract

Sequence is mining forms that show how the pit will be mined from the first stage to the final stages of mine design (pit limit). The purpose of this study is to design sequences mining to monthly production target at Bara 14 Seam C. Plan production targets at this location is 40,000 tons of coal per month and a maximum stripping ratio is 15:1. Analysis data and research design sequence using software Minescape 4.118. The coal reserves which designed based on pit limit is 162,370 tons and 2,425,450 bcm of overburden material. The first sequence has an area of 4.97 ha mine openings with the amount of 40,000 tons of coal and overburden 599,990 bcm. Stripping ratio in this sequence is 15:1. The second sequence has a wide opening 8.44 ha mines the number of 40,000 tons of coal and overburden 599,900 bcm. Stripping ratio in this sequence is 15:1. The third sequence has an area of 11.67 ha mine openings with the amount of 40,000 tons of coal and overburden 599,520 bcm. Stripping ratio in this sequence is 15:1. The fourth sequence has extensive mine openings 11.67 ha with the amount of 40,000 tons of coal and overburden 599,330 bcm. Stripping ratio in this sequence is 15:1. The fifth sequence has extensive mine openings 11.67 ha with the amount of 2,370 tons of coal and overburden 26,710 bcm. Stripping ratio in this sequence is 11:1.Keywords: design, pit limit, sequence, stripping ratio, production target

Collaboration network of the authors

40 authors · 74 co-authorship links · 1 across different organisations · showing the 40 most connected

Hover or tap a name to highlight its co-authors. Double-click to open the author's page.

  • Universitas Halu Oleo
  • Diponegoro University
  • State University of Semarang
  • Affiliation unknown
  • Different organisations
  • Same organisation
  • Affiliation unknown
  • Thicker line = more joint articles · bigger circle = more articles
Show as table
Co-authorOrganisationJoint articles
Wa NurgayahAffiliation unknown7
. YusnainiAffiliation unknown3
La Ode Baytul AbidinAffiliation unknown2
A. Ginong PratikinoUniversitas Halu Oleo2
Purwanto PurwantoDiponegoro University2
Indriyani NurUniversitas Halu Oleo2
Asriyana AsriyanaUniversitas Halu Oleo1
Endang Rahmi HuteAffiliation unknown1
Azwar SidiqUniversitas Halu Oleo1
Nurhuda AnnaastasiaUniversitas Halu Oleo1
Akhmad MansyurUniversitas Halu Oleo1
Sjamsu Alam LawelleAffiliation unknown1
Hasbullah SyafAffiliation unknown1
Adiyanto AdiyantoAffiliation unknown1
Muslim TadjuddahAffiliation unknown1
Asep AsepAffiliation unknown1
. FirmansyahAffiliation unknown1
Muh. RivaldyAffiliation unknown1
. FitriAffiliation unknown1
. RahmadaniAffiliation unknown1
. AyuAffiliation unknown1
Muhammad Fajrin OdeAffiliation unknown1
. SahidinAffiliation unknown1
Arwan Arif RahmanAffiliation unknown1
Rusham MuhuAffiliation unknown1
Agus SupriyadiAffiliation unknown1
Ricky RickyAffiliation unknown1
Muhammad RuslinAffiliation unknown1
Tti DesmariAffiliation unknown1
Muhammad Fajar PurnamaAffiliation unknown1
Suparman .Affiliation unknown1
Akbar AlifAffiliation unknown1
Ayu WandiraAffiliation unknown1
. HaliliAffiliation unknown1
Subhan SubhanState University of Semarang1
Yuslan YuslanAffiliation unknown1
Muh. Abu SofyanAffiliation unknown1

Affiliations come from OpenAlex; journal OAI-PMH metadata carries none. Authors without an OpenAlex ID are matched by name, which can merge or split people.

Metadata source: OAI-PMH (metadata jurnal) https://journal.unhas.ac.id/index.php/jpg/oai, first harvested 5 Nov 2026, last seen 5 Nov 2026.
Original metadata (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">PERANCANGAN SEQUENCE PENAMBANGAN BATUBARA UNTUK MEMENUHI TARGET PRODUKSI BULANAN</dc:title>
	<dc:creator xml:lang="en">Aryanda, Dadang</dc:creator>
	<dc:creator xml:lang="en">Ramli, Muhammad</dc:creator>
	<dc:creator xml:lang="en">Djamaluddin, H</dc:creator>
	<dc:description xml:lang="en">Sequence is mining forms that show how the pit will be mined from the first stage to the final stages of mine design (pit limit). The purpose of this study is to design sequences mining to monthly production target at Bara 14 Seam C. Plan production targets at this location is 40,000 tons of coal per month and a maximum stripping ratio is 15:1. Analysis data and research design sequence using software Minescape 4.118. The coal reserves which designed based on pit limit is 162,370 tons and 2,425,450 bcm of overburden material. The first sequence has an area of 4.97 ha mine openings with the amount of 40,000 tons of coal and overburden 599,990 bcm. Stripping ratio in this sequence is 15:1. The second sequence has a wide opening 8.44 ha mines the number of 40,000 tons of coal and overburden 599,900 bcm. Stripping ratio in this sequence is 15:1. The third sequence has an area of 11.67 ha mine openings with the amount of 40,000 tons of coal and overburden 599,520 bcm. Stripping ratio in this sequence is 15:1. The fourth sequence has extensive mine openings 11.67 ha with the amount of 40,000 tons of coal and overburden 599,330 bcm. Stripping ratio in this sequence is 15:1. The fifth sequence has extensive mine openings 11.67 ha with the amount of 2,370 tons of coal and overburden 26,710 bcm. Stripping ratio in this sequence is 11:1.Keywords: design, pit limit, sequence, stripping ratio, production target</dc:description>
	<dc:publisher xml:lang="en">Departemen Teknik Geologi</dc:publisher>
	<dc:date>2016-07-25</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.unhas.ac.id/index.php/jpg/article/view/800</dc:identifier>
	<dc:source xml:lang="en">Jurnal Penelitian Geosains; Vol. 10 No. 2 (2014)</dc:source>
	<dc:source>1858-3636</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://journal.unhas.ac.id/index.php/jpg/article/view/800/554</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2016 Jurnal Penelitian Geosains</dc:rights>
</oai_dc:dc>